Drilling foundation-we havent talked about drillin

Drilling foundation-we havent talked about drilling for a long time-another forbidden subject for those who profit from a pps fall.
No other junior w any drill holes to my knowledge is anywhere near this low pps. CWRN has 73 drill holes and not 1 dry hole.

Since the drilling has been comparatively so outstanding for this pps the argument by those who profit from a pps fall was the drilling was secret--what is so secret about drilling info in PR's in addition to the drilling info noted many times in the pics--and the many times repeated note of CWRN in the PR representing the sub is subsumed under CWRN-in English that means CWRN owns the sub-which is absolutely normal-companies -penny and blue chips,commonly have subs-at the time they formed it Mex law required a sub headed by a Mex national.

As noted in many PR's the SS has not changed since 2010 (NOV 17 PR) because unlike other co's at this pps CWRN not only has a product but substantial income.

The custom trommel and the by products it will process are also noted

CWRN: "Wide Area Deep Drilling Underway"
Date : 04/13/2012 @ 8:30AM
Source : MarketWire
Stock : Cotton & Wstn Mining (CWRN)

CWRN: "Wide Area Deep Drilling Underway"

Cotton & Wstn Mining (USOTC:CWRN)


Cotton & Western Mining, Inc. (PINKSHEETS: CWRN) In 2011, Panamerican Minerals Ventures, S.A. de C.V. Mexico, the operators of the "Guadalupe Iron Mineral Concession," drilled three deep conformation holes 300 meters apart in the center line of the 1,500 meter long Coloso Iron Mineral Vein, (one of four major iron mineral veins located on the concession); the purpose of those drill-holes was to explore the depth of the Coloso Vein, since the original drill program of 68 holes was shallow at 20-meters depth. Drill-hole 69 at 44-meters revealed continuous iron minerals mixed Magnetite and Hematite down to an elevation point of 81-meters above sea level, where the drilling was suspended without punching through the iron minerals as the iron content became lower and the mineral became solid magnetite. Drill-hole 70 at 84-meters depth on the lower elevation of the concession revealed the same mineral structure as drill-hole 69, hitting iron mineral at 4-meters down and continuous to 84-meters where the drilling was suspended at 2-meters above sea level; the third Drill-hole number 71 at 54-meters depth revealed continuous magnetite as well, the drilling was suspended pending simulated concentration testing of the lower grade materials to better understand the percentage of Fe304 (Magnetite Iron Oxide) uplift that could be anticipated if the materials were processed through a series of beneficiations. Results from those analytical studies indicated that the iron minerals can be processed to a Grade-A iron mineral status. Management has been discussing the feasibility of building a concentration plant on site with the corporation of Bao Steel Group of China, provided that there is enough magnetite mineral reserve to justify the investment; therefore, the company has begun a series of new and deeper drilled-holes on a wide-area bases to establish parameters for an accurate calculation of available mineral reserves.

The company is continuously mining the near-surface iron minerals which require dry magnetic separation to achieve the clients specifications.

Other noteworthy news: the Company has contracted PowerScreen of California to build a heavy-duty 8ft x 30ft x 0.05mm cylindrical Trommel screening plant capable of screening out the small iron chips accumulated since the project went into production in November 2010. This equipment should be on-site and ready to begin processing a shipload of sinter fines within the next couple weeks. The balance of iron minerals less than 0.05mm in size shall be sold into the organic mineral fertilizer industry