$GTCH (OTC PINK: GTCH ) ("GBT” or the “Company”),

New Post Public Reply Private Reply Replies (0) Message Board
budfoxfun
225
$GTCH (OTC PINK: GTCH ) ("GBT” or the “Company”), is researching the development of a machine learning-driven, automated integrated circuits design environment, enabling Fast-Track, Design-to-Silicon capabilities. The research is focused on an unified environment that contemplates including architecture design, functional verification, full-system power analysis and comprehensive physical verification. The goal of the design environment is to improve design performance by analyzing latency area optimization, bandwidth and power. The solution that the Company is researching is aimed to support custom analog, mixed, radio frequency and synthesis designs. In addition, the Company intends that the new system will perform signoff extraction, static timing analysis (STA), robust physical verification including design for manufacturing (DFM) and electromigration.

Typically, the industry is using separate electronic design automation (EDA) tools for specific topic which creates vast integration efforts. GBT plans to offer a one-shop stop for the entire IC design flow. GBT believes that a comprehensive, highly automated flow, would enable fast-track for an IC design project by combining traditionally separate front-end and back-end chip design technologies, into one integrated flow. The automated flow is being designed to eliminate iterations between EDA tools, accelerating the design cycle and reducing the overall IC development time and costs. The system plans to support mixed signals System on a Chip (SoC), digital cores and analog IPs. The research is examining the use of the GBT’s machine learning-driven accelerators to dramatically enhance design productivity and enabling design reuse in the design environment. Deep learning algorithms will aim to provide rapid design capabilities by analyzing and optimizing circuit designs and layouts. The system will take into consideration the process design rules, reliability constraints, DFM and thermal analysis aspects. GBT believes that its research will illustrate that this type of a machine learning-driven, unified, IC design environment will provide a quantum leap in efficiency and productivity for microchip’s designers, significantly reducing the overall IC’s design time.

“We are researching an IC solution that would target small start-up companies to large corporations in the semiconductor industry with varying design requirements. With GBT’s new approach, we aim to develop a machine learning-driven, one automated IC design flow, enabling Fast-Track Design-to-Silicon for IC design houses. The way we want to do this is by combining traditionally separate front-end and back-end chip design flows into one integrated environment that accelerates the overall design cycle and reducing the IC development costs. A typical microchip design process includes many steps which are classified as front-end and back-end tasks. Various steps are executed using separate EDA tools which require vast amount of integration and design environment adjustments. The new, machine learning-driven flow that we are researching aims to provide one-stop design environment advanced capabilities, with high levels of automation, with the goal of enabling the delivery of superior quality designs, with much faster completion time. The usage of our deep learning and advanced computational geometry algorithms aims to produce a comprehensive design environment, enabling efficient digital/analog design and implementation, particularly with advanced manufacturing nodes. In addition, we are also researching incorporating other capabilities into the system which may include functional and physical verification, simulations, power optimization, characterization, or yield management. With this research we aim to standardize digital and analog IC’s design, simulation, verification and characterization. We firmly believe that a one, intelligent, automated IC design environment will introduce a significant productivity enhancement for IC design firms, reducing their overall projects design time and bringing them faster to market” stated Danny Rittman, the Company’s CTO.
Scroll down for more posts ▼

Top 10 Most Recent News Articles

Travel Disruptions Reveal the Value of Human Support

Updated Category News Views 61

Air travel’s ugly little secret surfaced again during the recent ground stop: a reservation is easy, but rescuing a trip is labor-intensive, fast-moving work. Internova Travel Group says its people across Travel Leaders Network, Global Travel Collection and ALTOUR moved quickly as cancellations piled up and travelers were left staring at busted itineraries. That is not...

Continue Reading
Foresight Solar Insurance Trial Beats Fixed PPA Route

Updated Category News Views 72

Six solar sites and one settled insurance contract have produced a result worth studying, not celebrating with confetti. Foresight and Paratus say their completed renewable-price insurance policy generated a £14.49/MWh net uplift, after premium, against the revenue those assets would have earned under a fixed-price power purchase agreement. In a UK renewables market...

Continue Reading
Niron's $1.8B Alabama Bet Carries Big Magnet Stakes

Updated Category News Views 35

A Huge Factory Claim Needs More Than Applause A magnet company just tossed a very large number onto Alabama's economic-development table. Niron Magnetics says it plans a $1.8 billion investment in the state that would create 700 jobs. That is not pocket change, not a ribbon-cutting trinket, and not the sort of announcement investors should breeze past between earnings...

Continue Reading
Page Library Grant Makes a Practical Case for Access

Updated Category News Views 56

A library card is not much use if a family cannot reach the help behind it. That plain reality sits at the center of AZ Blue Health Choice’s $10,000 contribution to the Page Public Library Family Resource Center, announced November 20, 2026. This is a modest dollar figure in the grand scheme of health care, but it is aimed at the kind of everyday gaps that can become...

Continue Reading
D-Wave Investors Face December 15 Lead Plaintiff Clock

Updated Category News Views 94

Quantum dreams met a very earthly spreadsheet problem at D-Wave this summer. The proposed securities class action against D-Wave Quantum Inc. puts a hard date on the issue for investors who bought shares between February 26 and August 25, 2026: December 15, 2026 is the deadline to seek lead-plaintiff status. That does not mean every holder needs to march into court. It...

Continue Reading
Korla Kiln Gains Show How Cement Efficiency Is Won

Updated Category News Views 79

A cement kiln does not care about corporate slogans; it cares whether the flame holds, the bearings stay alive, and the feed keeps moving. That is why the work at Xinjiang Tianshan Cement's Tashidian branch in Korla deserves a closer look. This is not a glossy tale about a futuristic factory appearing overnight. It is an account of an old, unforgiving industrial process...

Continue Reading
NEWWAVE Turns 15 and Chases a Bigger Tech Partner Role

Updated Category News Views 120

Fifteen years is about when an outsourced engineering shop has to prove it can be more than extra hands on a keyboard. NEWWAVE’s new identity and “Trusted Technology Partner” positioning are an attempt to make that jump: from carrying out software work to helping clients decide what work ought to be done, then sticking around after launch. It is a sensible ambition,...

Continue Reading
Early Home Care Signals Families Should Not Ignore

Updated Category News Views 46

A pill organizer sitting untouched can say more than a family conversation ever will. Jay Mann of Amada Senior Care in Richmond points to a hard truth in HelloNation's Nov. 20, 2026 article: the need for in-home support often arrives quietly, disguised as little breaks in routines that everybody would rather wave away. This is not a matter for armchair diagnosis, and...

Continue Reading
Epiroc Takes Live Remote Drilling to CES 2027 Stage

Updated Category News Views 31

A drill rig chewing through Virginia rock from a Las Vegas convention booth is either a serious industrial-tech moment or an expensive magic trick. At CES 2027, Epiroc intends to make the distinction painfully clear. From January 6 through 9, the Stockholm-based mining-equipment company and Luck Stone will connect Booth 7031 in the LVCC West Hall to a working quarry in...

Continue Reading
Morrison Tests Abu Dhabi as Its Next Capital Hub

Updated Category News Views 60

Abu Dhabi keeps collecting infrastructure managers the way a strong port collects ships: because the money, the policy ambition, and the projects are all converging there. Morrison’s decision to establish an office in ADGM is not some chest-thumping headline about instant deal flow. It is a practical move by a firm with nearly four decades behind it and more than US$35...

Continue Reading
.com/blog/news?page=2">More News Articles