David Holcomb is the president of Pentagon Technic
Post# of 1425
(Total Views: 445)
Posted On: 02/25/2021 12:44:33 PM
David Holcomb is the president of Pentagon Technical Services, Inc an oil & gas related consulting company based in Florence, Arizona. His oil and gas industry experience covers 46 years of continuous effort in research, development, technical training and technical marketing for well stimulation, oilfield chemistry and fracture diagnostics technologies. He has worked for Cardinal Chemical, Inc., Smith International Inc.’s Energy Division, Protechnics, a Division of Core Laboratories, FTS International, Inc., Flotek Industries, Inc. and Pentagon Technical Services, Inc. He has held various technical and technology management positions and has developed numerous products and methods for well intervention, most of which are in use today.
His educational background includes receiving his B.S. from Texas State University in biology and chemistry and his M.S., and Ph.D. in Chemical Engineering from the University of Texas. He has written and published over 40 technical and professional papers for SPE, SPEJ, AIChE, AGA, and SWPSC. He has been a distinguished lecturer for SPE (1984-85) on the topic of formation damage, and is an active member of SPE, ACS, and AIChE. He is on the SPE Young Professionals lecture circuit. He is the past chairman of the SPE International Oilfield Chemistry Symposium and the Texas Tech University Southwestern Petroleum Short Course as well as a retired board member for them. He was elected a Distinguished Member of the Denver Section of SPE in 1985. He holds three patents and has three pending in the areas of oilfield chemistry, fracture placement diagnostics, acid fracturing and nanotechnology. He has worked on assignments around the world including the USA, Canada, North Sea (Scotland and Norway), Mexico, Brazil, Ecuador, Australia and Algeria.
Now, compare the DD just posted as to what they are doing now! Note:
Grassy Creek Overview
https://www.para-con.com/2021-02-04-grassy-cr...erview.php
by David L. Holcomb, President - Pentagon Technical Services Inc.
Gary Grieco, CEO and Chairman - PCT LTD
February 4, 2021
Maverick Energy Services – PCT LTD.
Catholyte – Grassy Creek Oilfield, Waterflood Improvement Project, Vernon County, MO
PCT Ltd. is working with Maverick Energy Services in Vernon County, Missouri, to use a unique electrochemically produced catholyte to enhance the injectivity, sweep efficiency, and oil production in a modified seven-spot well pattern. This seven-spot pattern #2A is a part of the larger Grassy Creek Oilfield where all seven wells are situated in the eastern part of the field and are closely spaced making them ideal for a field pilot test. These particular wells have not been treated other than by traditional waterflood. (Other wells in Grassy Creek were treated with a steam flood and a surfactant with limited success.) The pay thickness is between 20 and 25 feet for the lower Bluejacket SS and up to 80 feet in the Warner SS. The porosity in the Bluejacket is between 14-16% and 21-24% in the Warner. The permeability is between 20 and 40 md in Bluejacket and between 118 and 687 md (avg. 350 md) in the Warner. The crude oil is moderate to low gravity (19-29 degrees API), and reservoir temperatures average approximately 90 degrees F. The catholyte is produced onsite from special electroionizing process machinery using clean brine water. It can produce up to 700 gallons per day of 600-700 pm and 600-900 ORP catholyte. Storage is provided for up to 2000 gallons onsite, and a distribution line and pump is tied directly to the 2A seven-spot well injection well(s).
The project is using catholyte which has been initiated with Maverick Energy Services by designing up to an initial 30-day trial using varying volumes of the catholyte. The trial is being preceded by doing production and injection testing with fluorescent tracers on the two injectors (Warner and Bluejacket zones) as well as production tests on wells 2-1 through 2-6 to establish a baseline injection/production rate and pressure (if any since in the past some have gone on a vacuum), and monitoring every 4 hours for two to three days for tracer at each producer.
Once the baseline rates and pressures are established and the producing wells validated with positive or negative tracer shows, then the catholyte will be produced onsite and injected into the two injection wells or one injector depending on the results of the tracer testing for each zone. If all wells are not in communication with the injection well(s), then the issue will be addressed by considering polyacrylamide polymer as a small volume (250-500 gallon) pumped ahead of the next volume of catholyte to help slow breakthrough or channeling to certain wells and allow a more efficient distribution to the other wells. This may or may not be required to provide more uniform distribution of the catholyte in as many producing wells as possible on the seven-spot pattern.
Once the injection profile is understood, then 1000 gallons of the (hot) 600-900 ppm catholyte solution will be manufactured and injected into the appropriate 2A injection wells. Then the injectors will be returned to injection of normal brine and monitored on day two with bucket tests performed on each well that is producing, looking for improved oil cut in the WOR as well as any pressure changes. Samples will be collected at each producing well. Then on day three, another 750 gallons (hot) catholyte will be injected followed by putting the well back on injection with clean injection brine water. Injection will continue over the next 24 hours (day four) followed by the production and sample testing protocol as before. This will be followed on the fifth day by another 500 gallons of (hot) catholyte and injection over the next 24 hours to monitor production rates and pressures as well as WOR. If oil ratio begins to increase, then the seven spot can be maintained on injection and repeating repeating the catholyte injection sequence described above over the next several days up to 30 days if necessary. The goal is to prove the catholyte technology for this reservoir type by a markedly improved oil cut after two to four weeks injection of catholyte alternating with injection brine water mix).
The results will be evaluated, and it will be decided that the injection will be continued as catholyte alternating with brine water as may be required to maintain improved oil cut in the water oil ratio (WOR).
Copyright © 2021
Holcomb's nanoparticle invention (which is already proven to increase production 30%+) combining with PCTL's Catholyte (which is already proven to increase production 30+ under different EPA register) work together, what will be the outcome?
The answer:
The nanoparticle technology has greater penetration but Catholyte is critical because it reduces buildup allowing the nanoparticles even greater access...
I wonder if this has been explained to RB Capital???? Actually, I don't have to wonder since they provided loans at the following conversion rates (they must know that .10, .15 & .20 cents is nothing) Note:
His educational background includes receiving his B.S. from Texas State University in biology and chemistry and his M.S., and Ph.D. in Chemical Engineering from the University of Texas. He has written and published over 40 technical and professional papers for SPE, SPEJ, AIChE, AGA, and SWPSC. He has been a distinguished lecturer for SPE (1984-85) on the topic of formation damage, and is an active member of SPE, ACS, and AIChE. He is on the SPE Young Professionals lecture circuit. He is the past chairman of the SPE International Oilfield Chemistry Symposium and the Texas Tech University Southwestern Petroleum Short Course as well as a retired board member for them. He was elected a Distinguished Member of the Denver Section of SPE in 1985. He holds three patents and has three pending in the areas of oilfield chemistry, fracture placement diagnostics, acid fracturing and nanotechnology. He has worked on assignments around the world including the USA, Canada, North Sea (Scotland and Norway), Mexico, Brazil, Ecuador, Australia and Algeria.
Now, compare the DD just posted as to what they are doing now! Note:
Grassy Creek Overview
https://www.para-con.com/2021-02-04-grassy-cr...erview.php
by David L. Holcomb, President - Pentagon Technical Services Inc.
Gary Grieco, CEO and Chairman - PCT LTD
February 4, 2021
Maverick Energy Services – PCT LTD.
Catholyte – Grassy Creek Oilfield, Waterflood Improvement Project, Vernon County, MO
PCT Ltd. is working with Maverick Energy Services in Vernon County, Missouri, to use a unique electrochemically produced catholyte to enhance the injectivity, sweep efficiency, and oil production in a modified seven-spot well pattern. This seven-spot pattern #2A is a part of the larger Grassy Creek Oilfield where all seven wells are situated in the eastern part of the field and are closely spaced making them ideal for a field pilot test. These particular wells have not been treated other than by traditional waterflood. (Other wells in Grassy Creek were treated with a steam flood and a surfactant with limited success.) The pay thickness is between 20 and 25 feet for the lower Bluejacket SS and up to 80 feet in the Warner SS. The porosity in the Bluejacket is between 14-16% and 21-24% in the Warner. The permeability is between 20 and 40 md in Bluejacket and between 118 and 687 md (avg. 350 md) in the Warner. The crude oil is moderate to low gravity (19-29 degrees API), and reservoir temperatures average approximately 90 degrees F. The catholyte is produced onsite from special electroionizing process machinery using clean brine water. It can produce up to 700 gallons per day of 600-700 pm and 600-900 ORP catholyte. Storage is provided for up to 2000 gallons onsite, and a distribution line and pump is tied directly to the 2A seven-spot well injection well(s).
The project is using catholyte which has been initiated with Maverick Energy Services by designing up to an initial 30-day trial using varying volumes of the catholyte. The trial is being preceded by doing production and injection testing with fluorescent tracers on the two injectors (Warner and Bluejacket zones) as well as production tests on wells 2-1 through 2-6 to establish a baseline injection/production rate and pressure (if any since in the past some have gone on a vacuum), and monitoring every 4 hours for two to three days for tracer at each producer.
Once the baseline rates and pressures are established and the producing wells validated with positive or negative tracer shows, then the catholyte will be produced onsite and injected into the two injection wells or one injector depending on the results of the tracer testing for each zone. If all wells are not in communication with the injection well(s), then the issue will be addressed by considering polyacrylamide polymer as a small volume (250-500 gallon) pumped ahead of the next volume of catholyte to help slow breakthrough or channeling to certain wells and allow a more efficient distribution to the other wells. This may or may not be required to provide more uniform distribution of the catholyte in as many producing wells as possible on the seven-spot pattern.
Once the injection profile is understood, then 1000 gallons of the (hot) 600-900 ppm catholyte solution will be manufactured and injected into the appropriate 2A injection wells. Then the injectors will be returned to injection of normal brine and monitored on day two with bucket tests performed on each well that is producing, looking for improved oil cut in the WOR as well as any pressure changes. Samples will be collected at each producing well. Then on day three, another 750 gallons (hot) catholyte will be injected followed by putting the well back on injection with clean injection brine water. Injection will continue over the next 24 hours (day four) followed by the production and sample testing protocol as before. This will be followed on the fifth day by another 500 gallons of (hot) catholyte and injection over the next 24 hours to monitor production rates and pressures as well as WOR. If oil ratio begins to increase, then the seven spot can be maintained on injection and repeating repeating the catholyte injection sequence described above over the next several days up to 30 days if necessary. The goal is to prove the catholyte technology for this reservoir type by a markedly improved oil cut after two to four weeks injection of catholyte alternating with injection brine water mix).
The results will be evaluated, and it will be decided that the injection will be continued as catholyte alternating with brine water as may be required to maintain improved oil cut in the water oil ratio (WOR).
Copyright © 2021
Holcomb's nanoparticle invention (which is already proven to increase production 30%+) combining with PCTL's Catholyte (which is already proven to increase production 30+ under different EPA register) work together, what will be the outcome?
The answer:
The nanoparticle technology has greater penetration but Catholyte is critical because it reduces buildup allowing the nanoparticles even greater access...
I wonder if this has been explained to RB Capital???? Actually, I don't have to wonder since they provided loans at the following conversion rates (they must know that .10, .15 & .20 cents is nothing) Note:
(1)
(1)PCT Ltd. (PCTL) Stock Research Links
WORDS TO LIVE BY:
Never argue with stupid people, they will drag you down to their level and then beat you with experience.
Get .... PrivacyLok https://cyberidguard.com/
Try SafeVchat: https://cyberidguard.com/
My comments are only my opinion and are not to be used for investment advice.
Please conduct your own due diligence before choosing to buy or sell any stock.
Never argue with stupid people, they will drag you down to their level and then beat you with experience.
Get .... PrivacyLok https://cyberidguard.com/
Try SafeVchat: https://cyberidguard.com/
My comments are only my opinion and are not to be used for investment advice.
Please conduct your own due diligence before choosing to buy or sell any stock.
Scroll down for more posts ▼