What exactly is PCTL's Hydrolyte®? (From the PCTL Distributor website)
https://pctcorporation.com/about
Who created Hydrolyte® and what is it used for?
Hydrolyte® is a hospital disinfectant, registered with the US EPA under US EPA Product Registration No. 92108-1. It was created, manufactured, and is marketed by Paradigm Convergence Technologies Corporation. (PCT Corp.)
A more in depth look at Hydrolyte®:
Hydrolyte® is a tuberculocidal, broad spectrum disinfectant that meets OSHA’s blood-borne pathogen standards, as well as demonstrating effectiveness against viruses similar to SARS-CoV-2 virus on hard, non-porous surfaces. Therefore, Hydrolyte® can be used against SARS-CoV-2 virus when used in accordance with the directions for use against Norovirus and Rhinovirus type 16 on hard, non-porous surfaces. COVID-19 is caused by SARS-CoV-2 virus. Hydrolyte® kills similar viruses and therefore can be used against SARS-CoV-2 virus when used in accordance with the directions for use against Norovirus and Rhinovirus type 16 on hard, non-porous surfaces.
*Refer to the CDC website at https://www.cdc.gov/coronavirus/2019-ncov/com...ction.html for additional information.
Hydrolyte®’s active ingredient is Hypochlorous Acid, which comprises 0.046% of PCT Corp.’s registered product 92108-1 (Hydrolyte®) with the remaining ingredients being categorized as naturally occurring “other” – salt and water.
How can I purchase Hydrolyte®?
Hydrolyte® is available when you need it by simply calling, emailing or on-line ordering from our distributors. You can find a dropdown list of our distributors at the top of this page. Some of our Distributors even provide Hydrolyte® on a subscription basis, so you can count on your refills coming directly to you like clockwork!
Where would I use it? What are the various applications?
Everywhere! Hydrolyte® is THE preventive solution for use against unwanted and dangerous microorganisms in healthcare, oil & gas and within the agricultural industries, as well as in your homes, grocery stores, retail shopping centers, offices, schools, daycares, restaurants, fitness centers, veterinary clinics, hotels, prisons, cruise ships, airplanes, and everywhere in between.
Technical Data
Please pull from these resources to read the technical information available on Hydrolyte®…you will be awed, we promise.
Why Hydrolyte®?
We build high-quality Annihilyzer® Infection Control Systems and Legacy Equipment (Electro-Chemical Activation “ECA”) equipment and engage with our Distributors to provide Hydrolyte® throughout the world because we are all about preventing the spread of infectious diseases and correcting the use of traditional, toxic chemicals that allowed bacteria and viruses to “morph” into “Super Bugs.”
by DesertEagle
Oil & Gas Applications...
Hydrolyte® and Catholyte solutions are used for stimulation and enhancement of oil and gas production and to improve performance of drilling fluids.
Hydrolyte® is a highly effective alternative to disinfectants that are non-biodegradable or bio-accumulative. As a disinfectant, Hydrolyte® is selective, targeting bacteria responsible for microbial induced corrosion and slime while being safe to humans.
Catholyte, the byproduct of the ECA process, has been used to replace diesel oil as a cleaning solution for drill bits and other equipment on the well site.
These kinds of solutions can be used to enhance production from wells which have been impacted by down-hole growth of bacteria, and other microorganisms, by killing the bacteria and removing the restrictive biomass.
Water used for the fracturing of oil and gas wells can be treated to manage bacteria, protecting fracturing fluids and gels, and ensuring polymer and improved performance.
Hydrolyte® solutions remove scale and slime build-up from pipes. Cooling water systems can be kept free of biomass, improving heat exchange values and eliminating corrosion caused by microbial induced corrosion (MIC).
Produced water may be treated before being revised in stimulation fluids or water floods.
Data collected from field operations where frac water was treated with anolyte (Hydrolyte®) shows that the bacteria levels in the frac water were reduced below the threshold level that would adversely impact stimulation fluids and gels.
Catholyte has been shown to substantially reduce the surface tension of water and can be used to condition water used to stimulate well production.
As Hydrolyte® has some of the same properties as Catholyte and, being a biocide, it is a surfactant itself to some extent.
Use of Hydrolyte® along with Catholyte at the well site results in recovering more oil using low cost and environmentally friendly ingredients compared to traditional disinfection chemicals (Biocides), which can be expensive, highly toxic and potentially hazardous for transport and storage.
