$LWLG Newby update Post
K so what Lightwave Logic does is produce unique patented polymers in Newark DE these polymers are capable of controlling Light by altering the signal. They ship those polymers to the Clean Room/Lab out in Colorado where they are spin coated and poled to line up the positive and negative ends of the chromophores on devices. For years Lightwave was only focused on the Polymer side but a few years back they decided to make devices because as Joe Miller said, “They could dominate the market”.
For Years the investors here would ask but does it work? (Lightwave has software that can model the performance of its polymers on its computers before the goo is made, but the industry wanted more). K so they did a bleach wave guide modulator to prove it worked, then they took someone else device and put the magic in, not only was it faster but it use about ¼ of the voltage which is important. You see data centers are using a ton of electricity to operate and cool the heat and they are getting larger, they need material that is cheaper, smaller/tighter, cooler, this is known as scaling. The Ol Electrons on the silicon chips cannot get any closer together because Electrons bump into and interfere with each other while Photons can literally pass through each other without any interference and do not generate heat. Todays Silicon and InP cannot scale but for the foreseeable future they will still be used in devices, good news is that Lightwaves material is compatible for hybrid devices.
OK I think you get it, now Lebby who spoke today recently took over as CEO, Fred Leonberger who has been with the company for years advising recently took over the operations committee. Obviously they cracked the nut so lets see what they did recently.
Started out to make a 2.5 Gig Modulator and once assembled it operated at 10 Gig.
Then they did a 25 Gig which once tweaked ended up idling at 28 Gig.
They have just proved a 50 Gig but it sounds like it may be capable of 100Gig (do I see a pattern here?)
They have someone packaging the 25 Gig mod but will not announce who that partner is.
They are going to ship out the 25 Gig mods and begin reviewing partners by the end of the year.
They plan to take the 50 Gig Mod and use a little PAM 4 magic on it to double the output so that 4 50 Gig Mods can run at 400 Gig which is what is next for the Data Centers and Lebby just hinted that it should be capable of 4 x100 x PAM = 800 Gig which is just being envisioned by the industry. You see Michael headed up a Muti Million Dollar Study a roadmap for the industry just before discovering Lightwave Logic and Joining Lightave Logic.
He just spoke today at a conference, and I think we’ll see a little video next. Next week is a conference in the Netherlands and I think that the market will find that very interesting.
Single Mode Light controlled by Plastic, Cheap Robust Plastic, so put that in your pipe and smoke it folks yes it has been a long road. I’m still saying this will end in good old fashion buyout well before the rubber meets the road because there are far too many companies with billions in the bank that cannot afford to miss the paradigm shift, Akin to Transistors replacing Vacuum tubes, Kerosene replacing whale oil, IMO it will become a household name like Teflon and gore-tex.
Many, Many, Multi Billion Dollar markets, Mark my words there will be games played. It is always best to average in as for getting out, with the exception of the vote will be out of my hands. One day it will be cash or shares in another compan, Mark My Words.
Xster Xster Read all about it.
I would invite you to review my posts oh and please read the few shorts on IHUB that bet against this company at the wrong time please read what they write, see if it makes sense or if they are just grasping at straws with random pot shots. See if it makes sense see if it actually applies to this company, Good Luck, Opportunities like this come along only a couple times in a life time. It is going to be an interesting couple of weeks folks.
K so what Lightwave Logic does is produce unique patented polymers in Newark DE these polymers are capable of controlling Light by altering the signal. They ship those polymers to the Clean Room/Lab out in Colorado where they are spin coated and poled to line up the positive and negative ends of the chromophores on devices. For years Lightwave was only focused on the Polymer side but a few years back they decided to make devices because as Joe Miller said, “They could dominate the market”.
For Years the investors here would ask but does it work? (Lightwave has software that can model the performance of its polymers on its computers before the goo is made, but the industry wanted more). K so they did a bleach wave guide modulator to prove it worked, then they took someone else device and put the magic in, not only was it faster but it use about ¼ of the voltage which is important. You see data centers are using a ton of electricity to operate and cool the heat and they are getting larger, they need material that is cheaper, smaller/tighter, cooler, this is known as scaling. The Ol Electrons on the silicon chips cannot get any closer together because Electrons bump into and interfere with each other while Photons can literally pass through each other without any interference and do not generate heat. Todays Silicon and InP cannot scale but for the foreseeable future they will still be used in devices, good news is that Lightwaves material is compatible for hybrid devices.
OK I think you get it, now Lebby who spoke today recently took over as CEO, Fred Leonberger who has been with the company for years advising recently took over the operations committee. Obviously they cracked the nut so lets see what they did recently.
Started out to make a 2.5 Gig Modulator and once assembled it operated at 10 Gig.
Then they did a 25 Gig which once tweaked ended up idling at 28 Gig.
They have just proved a 50 Gig but it sounds like it may be capable of 100Gig (do I see a pattern here?)
They have someone packaging the 25 Gig mod but will not announce who that partner is.
They are going to ship out the 25 Gig mods and begin reviewing partners by the end of the year.
They plan to take the 50 Gig Mod and use a little PAM 4 magic on it to double the output so that 4 50 Gig Mods can run at 400 Gig which is what is next for the Data Centers and Lebby just hinted that it should be capable of 4 x100 x PAM = 800 Gig which is just being envisioned by the industry. You see Michael headed up a Muti Million Dollar Study a roadmap for the industry just before discovering Lightwave Logic and Joining Lightave Logic.
He just spoke today at a conference, and I think we’ll see a little video next. Next week is a conference in the Netherlands and I think that the market will find that very interesting.
Single Mode Light controlled by Plastic, Cheap Robust Plastic, so put that in your pipe and smoke it folks yes it has been a long road. I’m still saying this will end in good old fashion buyout well before the rubber meets the road because there are far too many companies with billions in the bank that cannot afford to miss the paradigm shift, Akin to Transistors replacing Vacuum tubes, Kerosene replacing whale oil, IMO it will become a household name like Teflon and gore-tex.
Many, Many, Multi Billion Dollar markets, Mark my words there will be games played. It is always best to average in as for getting out, with the exception of the vote will be out of my hands. One day it will be cash or shares in another compan, Mark My Words.
Xster Xster Read all about it.
I would invite you to review my posts oh and please read the few shorts on IHUB that bet against this company at the wrong time please read what they write, see if it makes sense or if they are just grasping at straws with random pot shots. See if it makes sense see if it actually applies to this company, Good Luck, Opportunities like this come along only a couple times in a life time. It is going to be an interesting couple of weeks folks.
