Lightwave Logic For Dummies I
Post# of 871
(Total Views: 3733)
Posted On: 05/07/2017 10:11:26 AM
Lightwave Logic For Dummies I
The world is in fact consuming Data at a rate that is not sustainable with current technology and it is about to hit a wall and no one knows what will happen when that happens Moores law dictates a doubling every few years. A single individual just watching their dog from home is consuming more bandwidth than an Apollo mission to the moon.
For the most part Today’s computers are using silicon with electrons performing calculations then those electrons are converted with modulators/transceivers to light and then sent down fiber optics and at the other end they are converted back to electricity again with another transceiver. There are 2 different widths of fiber, the larger core (Big Pipe) is Multi mode 850nm ish the wavelengths are very tight /\/\/\/\/\/\ and then there is single mode pretty much almost a straight line
1310 nm and 1510nm (key). It is important that you understand because when you look at the technology often it will be multimode however within the past year the industry has chosen Single Mode as the Path Forward.
OK so Electrons can only get so close because they bump into each other and interfere so they must be kept apart. They also generate heat and massive cooling (just feel the bottom of your PC) is required so computers are moving to Photons because they are fast and can literally pass through each other without interference. The industry needs a stable material that is compatible with Silicon (and the entire CMOS process) to make the conversion on new Hybrid devices and today’s answer are devices made of Indium Phosphide (InP) and Gallium Arsenide (GaAs) while they are available to anyone this material is very expensive to use and does not scale (ability to reduce the size) to move forward. Lightwave has created a Patented (and some of it IP is held in secret) polymer, therefore the only place it is available is from them, this material is sprayed or spin coated on devices the poled (+ and –‘s lined up). Initially Lightave started out just making the Polymer but it took months a months to test a batch and they needed to 100’s of variations that is important to understand because there was a steep learning curve that many here took as failure, but it was all just part of the process of learning. Anyhow about 5 years ago Lightwave decide to bite the bullet build a chemical lab and a device lab and create their own feedback loop.
So there were steps throughout the evolution here, initially it was in a lab in Newport, then one of the founders had a medical problem I think it was Bim and Marcelli struggled to keep this afloat. Bim was a Dupont guy so he brought this to the attention of his Dupont buddies, they vetted it, basically recreated the process/knowledge that was lost with the founders memory. Anyway Basically A former Vice President of Dupont Polymer (Fasic) and Founder of Dupont thin films Eaton tapped their connections in the chemical world, after a few years they reached out the pharmaceutical industry to help clean up the dirty chromophore. So that is Polymer side basically a titan of the Polymer industry had blessed this. I think it was about this time that Fred Leonberger (Godfather/inventor of todays InP Modulator technology) started looking at this technology he hung around and blessed it. Now The fiber side, The former V.P. of Corning (the worlds largest fiber optic company) Joe Miller Joined another blessing. Oh also the entire time they had Terry Turpin NSA computer guru lending his support. I forget exactly when but we also had Smith of Taser on the board, he brought on Marcelli, then Marcelli moved to the Operating side and Admiral Zelibor took over Jim and Tom did the lab moves Z called for a device to prove that it worked. (When he came one I asked Admiral Z what his greatest accomplishment to date was, I asked he didn’t volunteer it, but he said a call from the Pentigon on 9/11 to take command of a 100 vessel carrier group to the middle east operation enduring freedom was born) Somewhere along the line Michael Lebby was doing a multi million dollar study of the Path Forward for the entire industry,now he has taken over the CEO slot and Just as important is Fred Leonberger (inventor of today’s incumbent technology) after years of guiding them he has decided to move to the Board of Directors and head up the Operations committee. Those 2 moves are huge obviously they have cracked the nut.
Initially when Lebby came on the board he headed up the operating committee and said we are doing 1 Gig, 10 Gig then the 25 Gig Single Mode Modulator to show the industry how we can modify our polymers to perform and scale. As of Last week we Just checked that Box. The Material WORKS.
Elevator Pitch - - - A Cheap Patented Plastic made in a test tube and dropped or sprayed on Silicon that is compatible with the entire CMOS process, will be used to convert Data to Light Waves using minute amounts of electricity and does not require cooling (a very green technology) . Similar to and Intel inside TM.
Oh the data center thing, data centers are getting bigger and bigger buying up all the real-estate around and they need something that can move the data around in a single mode form (distances are too far for multi mode). That is the initial target market for Lightwaves entrance into the market.
The uses for this technology are far too numerous to note but some are obvious like Millitary, Medical, Data Communications, Telecommunications, Gaming and on and on Literally 10’s if not hundreds of Billions of dollars may very well rely on this goo that will be inside doing the work but for now just focus the 2km data center market at 1 Dollar per Gig.
http://lightwavelogic.com/wp-content/uploads/...tVer12.pdf
Slide 47
As Z says Leonberger, Lebby and Miller can wax eloquently for hours talking about this, they are highly respected and can command an audience with anyone in the industry.
Fortune 500’s and Academia have tried, so I’m sure there is much doubt in the industry as to how such a small company could do this, but look at the talent, over the years I’ve watched, listened, questioned from every possible logical angle and I’m convinced that they did it.
I have no doubt that we will see a partnership soon or will simply be bought out. The industry needs a solution and it needs it soon. A Billion or two (do I here 5?) is peanuts for some of these companies.
OH as for how they fund operations the was an initial PP years ago (that I missed out on) and many others along the way, then LPC has been brought in (many do not understand it and because of that they are scared of it) they basically act as a middleman Lightwave sells them shares at a discount and they sell them on the market, there is a built in profit for them. As soon as Lightwave has a cash cow partner that will be close that out currently they own about 5 Per Cent and will do everything in their power to see maximum return on that core position, many do not quite Get That. Lightwave always keeps about 6 months of cash on hand Marcelli watches the money very close and is great at that, they always keep just enough on hand so they can concentrate on the actual business.
OK Now Lightwave HAS JUST Turned a New Page, I think we will begin to See Lebby, Leonberger and Possibly Miller tap someone on the shoulder to form something bigger. Let’s see, oh and yes some criticize me for being too positive and forward thinking, so I apologize also to them.
X
The world is in fact consuming Data at a rate that is not sustainable with current technology and it is about to hit a wall and no one knows what will happen when that happens Moores law dictates a doubling every few years. A single individual just watching their dog from home is consuming more bandwidth than an Apollo mission to the moon.
For the most part Today’s computers are using silicon with electrons performing calculations then those electrons are converted with modulators/transceivers to light and then sent down fiber optics and at the other end they are converted back to electricity again with another transceiver. There are 2 different widths of fiber, the larger core (Big Pipe) is Multi mode 850nm ish the wavelengths are very tight /\/\/\/\/\/\ and then there is single mode pretty much almost a straight line
1310 nm and 1510nm (key). It is important that you understand because when you look at the technology often it will be multimode however within the past year the industry has chosen Single Mode as the Path Forward.
OK so Electrons can only get so close because they bump into each other and interfere so they must be kept apart. They also generate heat and massive cooling (just feel the bottom of your PC) is required so computers are moving to Photons because they are fast and can literally pass through each other without interference. The industry needs a stable material that is compatible with Silicon (and the entire CMOS process) to make the conversion on new Hybrid devices and today’s answer are devices made of Indium Phosphide (InP) and Gallium Arsenide (GaAs) while they are available to anyone this material is very expensive to use and does not scale (ability to reduce the size) to move forward. Lightwave has created a Patented (and some of it IP is held in secret) polymer, therefore the only place it is available is from them, this material is sprayed or spin coated on devices the poled (+ and –‘s lined up). Initially Lightave started out just making the Polymer but it took months a months to test a batch and they needed to 100’s of variations that is important to understand because there was a steep learning curve that many here took as failure, but it was all just part of the process of learning. Anyhow about 5 years ago Lightwave decide to bite the bullet build a chemical lab and a device lab and create their own feedback loop.
So there were steps throughout the evolution here, initially it was in a lab in Newport, then one of the founders had a medical problem I think it was Bim and Marcelli struggled to keep this afloat. Bim was a Dupont guy so he brought this to the attention of his Dupont buddies, they vetted it, basically recreated the process/knowledge that was lost with the founders memory. Anyway Basically A former Vice President of Dupont Polymer (Fasic) and Founder of Dupont thin films Eaton tapped their connections in the chemical world, after a few years they reached out the pharmaceutical industry to help clean up the dirty chromophore. So that is Polymer side basically a titan of the Polymer industry had blessed this. I think it was about this time that Fred Leonberger (Godfather/inventor of todays InP Modulator technology) started looking at this technology he hung around and blessed it. Now The fiber side, The former V.P. of Corning (the worlds largest fiber optic company) Joe Miller Joined another blessing. Oh also the entire time they had Terry Turpin NSA computer guru lending his support. I forget exactly when but we also had Smith of Taser on the board, he brought on Marcelli, then Marcelli moved to the Operating side and Admiral Zelibor took over Jim and Tom did the lab moves Z called for a device to prove that it worked. (When he came one I asked Admiral Z what his greatest accomplishment to date was, I asked he didn’t volunteer it, but he said a call from the Pentigon on 9/11 to take command of a 100 vessel carrier group to the middle east operation enduring freedom was born) Somewhere along the line Michael Lebby was doing a multi million dollar study of the Path Forward for the entire industry,now he has taken over the CEO slot and Just as important is Fred Leonberger (inventor of today’s incumbent technology) after years of guiding them he has decided to move to the Board of Directors and head up the Operations committee. Those 2 moves are huge obviously they have cracked the nut.
Initially when Lebby came on the board he headed up the operating committee and said we are doing 1 Gig, 10 Gig then the 25 Gig Single Mode Modulator to show the industry how we can modify our polymers to perform and scale. As of Last week we Just checked that Box. The Material WORKS.
Elevator Pitch - - - A Cheap Patented Plastic made in a test tube and dropped or sprayed on Silicon that is compatible with the entire CMOS process, will be used to convert Data to Light Waves using minute amounts of electricity and does not require cooling (a very green technology) . Similar to and Intel inside TM.
Oh the data center thing, data centers are getting bigger and bigger buying up all the real-estate around and they need something that can move the data around in a single mode form (distances are too far for multi mode). That is the initial target market for Lightwaves entrance into the market.
The uses for this technology are far too numerous to note but some are obvious like Millitary, Medical, Data Communications, Telecommunications, Gaming and on and on Literally 10’s if not hundreds of Billions of dollars may very well rely on this goo that will be inside doing the work but for now just focus the 2km data center market at 1 Dollar per Gig.
http://lightwavelogic.com/wp-content/uploads/...tVer12.pdf
Slide 47
As Z says Leonberger, Lebby and Miller can wax eloquently for hours talking about this, they are highly respected and can command an audience with anyone in the industry.
Fortune 500’s and Academia have tried, so I’m sure there is much doubt in the industry as to how such a small company could do this, but look at the talent, over the years I’ve watched, listened, questioned from every possible logical angle and I’m convinced that they did it.
I have no doubt that we will see a partnership soon or will simply be bought out. The industry needs a solution and it needs it soon. A Billion or two (do I here 5?) is peanuts for some of these companies.
OH as for how they fund operations the was an initial PP years ago (that I missed out on) and many others along the way, then LPC has been brought in (many do not understand it and because of that they are scared of it) they basically act as a middleman Lightwave sells them shares at a discount and they sell them on the market, there is a built in profit for them. As soon as Lightwave has a cash cow partner that will be close that out currently they own about 5 Per Cent and will do everything in their power to see maximum return on that core position, many do not quite Get That. Lightwave always keeps about 6 months of cash on hand Marcelli watches the money very close and is great at that, they always keep just enough on hand so they can concentrate on the actual business.
OK Now Lightwave HAS JUST Turned a New Page, I think we will begin to See Lebby, Leonberger and Possibly Miller tap someone on the shoulder to form something bigger. Let’s see, oh and yes some criticize me for being too positive and forward thinking, so I apologize also to them.
X
(0)
(0)Lightwave Logic Inc (LWLG) Stock Research Links
Scroll down for more posts ▼