MILPITAS, Calif. and SUNNYVALE, Calif., Sept. 19, 2016 (GLOBE NEWSWIRE) -- Lumentum Holdings Inc. (Lumentum) and Finisar® (NASDAQ: FNSR ) are showcasing demonstrations of compatible 100G SWDM4 optical transceivers at the European Conference on Optical Communications ( ECOC ) in Dusseldorf, Germany from September 19-21.
The two demonstrations are scheduled to take place in Lumentum’s booth #600 and Finisar’s booth #500 on the exhibit floor. Each module manufacturer will be demonstrating an SWDM4 optical transceiver based on a common set of specifications. The QSFP28 modules will be plugged into test systems provided by Anritsu Company and Viavi Solutions.
Using shortwave wavelength division multiplexing (SWDM), a novel technology in short reach data communications, multiple data streams from lasers emitting different wavelengths in the 850nm band are optically multiplexed into a single fiber at the transmitter and de-multiplexed at the receiver into the original data streams. This provides a direct, low-cost solution for 100G data rate upgrades for data center customers who have an installed base of duplex multimode fiber (MMF) running at 10G today. Before SWDM, the standard upgrade path was to switch to multi-mode ribbon fiber and use 100G SR4 over four parallel data streams.
“SWDM is expected to play an important part in the migration from a 10G-centric data center to an architecture based on 40, 100, or 200G,” said James Wynia, director of product management at Dell EMC Networking. “We are pleased to see multiple vendors embrace a common interface because of the security of supply it provides to end customers.”
The compatibility of the Lumentum and Finisar SWDM4 transceivers benefits customers by presenting two well-known optical module suppliers with this key technology for the most economical 100Gbps upgrade path.
“This demonstration marks an important step in the development of a low-cost 100G solution for a great many customers who have made the investment over the years in a duplex multimode fiber infrastructure for their data centers,” said Kevin Redner, product line manager at Lumentum. “We knew the technology existed to use SWDM for 100G short reach applications and today we’re pleased to show that customers can move confidently forward knowing that they have multiple sources for this product.”
“SWDM technology enables data center operators to extract ongoing value from their legacy duplex multimode fiber plant,” added Tony Abdilla, senior product line manager at Finisar. “Duplex multimode fiber was widely deployed for 10G data transmission. With SWDM transceivers, the same fiber can be used to carry 100G data.”
In 2015 the SWDM Alliance ( www.swdm.org ) was created with the express purpose of promoting this technology in response to a need in the industry. With SWDM4, an optical transceiver with a standard QSFP28/CAUI-4 electrical interface can be plugged into an Ethernet switch or NIC and drive 100Gbps over legacy duplex MMF.
Contacts:
| Media for Lumentum: Greg Kaufman Tel +1 (408) 546-4235 media@lumentum.com Media for Finisar: Victoria McDonald +1 (408) 542-4261 press@finisar.com | Investors for Lumentum: Chris Coldren Tel +1 (408) 404-0606 investor.relations@lumentum.com Investors for Finisar: Kurt Adzema +1 (408) 542-5050 investors.relations@finisar.com |
About Lumentum Lumentum (NASDAQ: LITE ) is a market-leading manufacturer of innovative optical and photonic products enabling optical networking and commercial laser customers worldwide. Lumentum’s optical components and subsystems are part of virtually every type of telecom, enterprise, and data center network. Lumentum’s commercial lasers enable advanced manufacturing techniques and diverse applications including next-generation 3D sensing capabilities. Lumentum is headquartered in Milpitas, California with R&D, manufacturing, and sales offices worldwide. For more information, visit www.lumentum.com .
About Finisar Finisar Corporation (NASDAQ: FNSR ) is a global technology leader for fiber optic subsystems and components that enable high-speed voice, video and data communications for telecommunications, networking, storage, wireless, and cable TV applications. For more than 25 years, Finisar has provided critical optics technologies to system manufacturers to meet the increasing demands for network bandwidth and storage. Finisar is headquartered in Sunnyvale, California, USA with R&D, manufacturing sites, and sales offices worldwide. For additional information, visit www.finisar.com .
LUMENTUM and the Lumentum Logo are trademarks of Lumentum Operations LLC and its affiliates and subsidiaries, and may be registered in some jurisdictions. Finisar is a registered trademark of Finisar Corporation.
