Sonoco Invests in Higher Production Capacity for Advanced

New Post Public Reply Private Reply Replies (0) Message Board
News Desk 2018
Sonoco Invests in Higher Production Capacity for Advanced Injection-Molded Rigid Plastic Packaging

HOCKENHEIM, Germany, Sept. 08, 2016 (GLOBE NEWSWIRE) -- Sonoco Europe has expanded its production sites for injection-molded rigid plastic packaging in Zwenkau, Germany. By investing approximately 8 million Euros and adding 25 new employees, the Hockenheim-based company aims to increase production capacity and improve the location’s energy efficiency. In Zwenkau, Sonoco produces injection-molded rigid plastic packaging using advanced in-mold labelling (IML) technology. IML technology allows for the creation of highly decorated, visually appealing plastic containers particularly suitable for uniquely showcasing spreads, sausage products, fish and dairy produce. Additionally, Sonoco produces IML lids for rigid paper containers in Zwenkau.

Expanding product lines and staff By expanding its two production sites in Zwenkau, Sonoco significantly increases its production capacities for injection-molded rigid plastic packaging. Until recently, the site known as Zwenkau II was primarily used to provide additional capacity to assist with peaks in production demand. Since June 2016, the Company has continuously operated on a three-shift basis. The workforce has increased from 75 to 100 staff, and approximately 8 million Euros were invested in the facility expansion. All lines are now supplied with resin directly and fully automatically from on-site granule silos. The company further established additional office space and a high-bay warehouse .

“The sites Zwenkau I and II were already among the most modern and efficient plants in our industry,” said Séan Cairns, general manager and division vice president, Sonoco Consumer Products Europe. “With the current investments, we will further extend this lead and react to the rapidly increasing demand for modern plastic packaging in the food market.”

Outstanding tactile and visual effects: high-quality decoration with IML technology An increasing number of food manufacturers use Sonoco’s decorated IML injection-molded rigid plastic packaging for moist and sensitive food products. Thanks to the IML technology, production and labelling of containers are combined in one single process step. The label is injected directly into the packaging wall and is preferably made from the same plastic substance as the container. Both components merge during processing – an advantage in terms of recycling as there is no need to separate materials. Most importantly, IML opens up a wide range of design possibilities and outstanding tactile and visual effects. Plastic containers can be designed in various shapes and colors, including transparent windows and photorealistic images.

Thanks to Sonoco’s patented PermaSafe ® technology, these advantages are also available for sterilized and pasteurized food. These types of products were usually packaged in glass or tin cans. As the “reinvention of the can,” PermaSafe ® packaging is practically impermeable to oxygen and water vapor.

“Due to the PermaSafe ® technology, our plastic containers durability rivals that of tin cans,” said Andreas Rothschink, sales director of plastic packaging, Sonoco. “At the same time, they offer more decoration possibilities and higher convenience for consumers.”

As opposed to metal cans, the plastic packaging alternative features a snap lid. It makes the container resealable, and consumers can eat the product in portions.

Apart from complete plastic packaging solutions, Sonoco also produces IML lids for rigid paper containers in Zwenkau. The lids can be individually designed with IML technology and significantly expand the packaging’s decoration area. The IML lids are available for round and rectangular rigid paper containers.

About Sonoco Europe Sonoco's more than 70 operations in Europe provide customers with solutions in Global Rigid Paper and Closures; Global Plastics; Packaging Services and Graphics Management. Offering a range of packaging materials, packaging services, technical disciplines, material science and manufacturing capabilities, Sonoco takes a holistic approach to providing customized solutions that meet our customers' unique needs. To learn more, visit www.sonocoeurope.com .

About Sonoco Founded in 1899, Sonoco (NYSE: SON ) is a global provider of a variety of consumer packaging, industrial products, protective packaging, and displays and packaging supply chain services. With annualized net sales of nearly $5 billion, the Company has 20,800 employees working in more than 330 operations in 34 countries, serving some of the world’s best known brands in some 85 nations. Sonoco is a proud member of the 2015/2016 Dow Jones Sustainability World Index. For more information on the Company, visit our website at www.sonoco.com .

Contact: Brian Risinger +843-383-7509 brian.risinger@sonoco.com

Scroll down for more posts ▼

Top 10 Most Recent News Articles

Net Zero Efforts to Cost Europe €60B Annually by 2050

Updated Category News Views 91

Hefty Prices Loom Over Net Zero Commitments Well, strap in for a wallet buster, folks. Europe's largest players are staring down the barrel of a colossal €60 billion annual bill to clean up their carbon mess by 2050. That's the ticker in Senken's latest report, 'Pace of Change 2026.' Talks like these remind me there's no such thing as a free lunch, especially when...

Continue Reading
DemandTec Leads the Pack in Retail Pricing Arena

Updated Category News Views 26

DemandTec's Climb to Retail Pricing Stardom The news hitting the streets is that DemandTec's carved out a top spot in QKS Group's SPARK Matrix™ for Intelligent Retail Pricing & Promotion Optimization for 2026. In an industry filled with slick operators and gimmicks, it takes some real chops to stand out. They've clinched this position by rolling out a platform that ties...

Continue Reading
Roche Delivers Endotrophin Assay to Nordic Bioscience Lab

Updated Category News Views 43

Roche Opens New Frontier in Diagnostic Biomarkers Get ready to chew on this: Roche Diagnostics is bringing something new to Nordic Bioscience's CLIA lab. They're offering up their Endotrophin research prototype assay on the cobas® e801 Analyzer. Now, what does this mean for the scientific world? Well, it might just shake things up for those battling cardiovascular and...

Continue Reading
Phoenix Contact Achieves Guinness Record in Wiring

Updated Category News Views 160

A Blitz of Wires and Innovation Boy, did Phoenix Contact shake things up in Blomberg. On a crisp November day, a group of fresh-faced first-year students pulled off something astounding—wiring 500 terminal blocks in a jaw-dropping 2 minutes and 20 seconds. This wasn’t just any effort; it was enough to earn them a shiny new Guinness World Record. What they did wasn’t...

Continue Reading
DoGo Power Revamps Energy for Remote Indonesian Isle

Updated Category News Views 77

Bringing Light to Pagerungan Kecil Island These days, if you wander into the fishing communities of Pagerungan Kecil Island, the buzz isn't just from the daily catch. Residents are talking about power, and not the kind you get from a generator spluttering along—I'm talking about a brand-new energy storage system that’s turning the lights on in ways these folks have...

Continue Reading
Evotec’s $2.9M Grant Advances Drug Safety Tech

Updated Category News Views 101

Revitalizing Drug Development with Human Stem Cells Evotec's latest win—a crisp $2.9 million grant from the Gates Foundation—is like a shot of adrenaline for drug safety innovation. This isn't just another drop in the bucket; it's a solid boost toward improving how we screen potential drugs for fetal risks before they're tossed into the costly whirlpool of clinical...

Continue Reading
Medtronic's Bold Move to Own Carotid Market Full-Scale

Updated Category News Views 44

When a giant like Medtronic makes a move, you can bet investors take notice, and this latest acquisition is no exception. They’re reaching into their deep pockets to acquire Contego Medical, a company shaking up the world of carotid artery disease treatments. It’s a tactical strike to solidify their leadership in cardiovascular solutions. Medtronic's Bet on Innovation...

Continue Reading
ROBOTERA Debuts XHAND 1 Pro-U in NVIDIA Demo

Updated Category News Views 20

ROBOTERA Steps Up with XHAND 1 Pro-U Move over, traditional robotics; ROBOTERA is here to shake things up with their latest marvel, the XHAND 1 Pro-U. This futuristic gadget isn't just making waves at the Conference on Robot Learning (CoRL) where Jim Fan of NVIDIA spotlighted it in his GR00T 2 demo, it's setting a new bar for robotic dexterity. Hand in Glove with Human...

Continue Reading
Atomera Preps for Key Craig-Hallum Conference

Updated Category News Views 13

Unpacking the NYC Gathering Alight, let's comb through the moving parts here. Atomera Inc., ticker NASDAQ: ATOM for those eyeing the dance of numbers, is all set to step into the limelight at the 17th Annual Craig-Hallum Alpha Select Conference on November 17, 2026. This shindig isn't just another date on the calendar; it's a strategic haunt where Atomera will rub...

Continue Reading
ICCSD in Beijing: AI and Culture's Future Explored

Updated Category News Views 114

AI's Intersection with Culture in the Spotlight Imagine a room full of people hammering out the future of AI and culture—it starts to feel like a melting pot for the mind. That was the scene in Beijing when the ICCSD Advisory Committee congregated on October 26, 2026. With experts pooling from four different countries, there was no shortage of fireworks. They hashed out...

Continue Reading

Top 5 Most Recently Viewed Articles

CSX Corporation Teams Up for Q1 Earnings Conference Call

Updated Category News Views 131

CSX Corporation's Upcoming First Quarter Earnings Release CSX Corporation (NASDAQ: CSX) is excited to announce its first-quarter earnings release slated for a date following the market close. This pivotal moment will take place on a Wednesday, with management inviting participants to join their insightful conference call. Details of the Earnings Call A live webcast and...

Continue Reading
Innovative ReWalk 7 Exoskeleton Now Available for All Users

Updated Category News Views 345

The Launch of ReWalk 7 Personal Exoskeleton Lifeward Ltd., known for its groundbreaking innovations in medical technology, has recently unveiled its seventh generation of personal exoskeletons, the ReWalk 7. This next-generation device is now available throughout the United States, primarily aiming to benefit individuals with spinal cord injuries (SCI). This remarkable...

Continue Reading
Eve's Certification Progress Marks Aviation Milestone

Updated Category News Views 51

Certification: A New Lease on Air Mobility Folks, the air mobility future is taking one giant leap forward, and Eve Air Mobility is right at the helm. With Brazil’s aviation authority spearheading a consultation for updated airworthiness criteria and Eve stepping up for European certification, these advancements aren't just footnotes—they're headlines. NYSE:EVEX has...

Continue Reading
Exciting Launch of Lofthill Residences: A Premier Investment Hub

Updated Category News Views 164

Lofthill Residences: A Fresh Investment Opportunity in Kuala Lumpur The real estate market in Kuala Lumpur has taken an exciting turn with the introduction of Lofthill Residences, a groundbreaking initiative by TRE Towers and the Armani Group. Conveniently located near the vibrant KLCC and just a short walk from the Raja Uda MRT station, this development stands out as a...

Continue Reading
Exclaimer Welcomes Rob Singer as CEO to Propel Growth

Updated Category News Views 385

Exclaimer Welcomes New Leadership for Future Growth Exclaimer, a leader in email signature management, has announced the appointment of Rob Singer as its new CEO. This comes at a key moment for the company, which has recently doubled its annual revenue and is set to expand its presence with new offices opening soon. Experience and Vision Matter Rob Singer comes to...

Continue Reading