Pulse Electronics Corp (PULS) 1.6000 $PULS
Pulse Electronics Introduces the Ultra-Thin V-Thinity (PSIBVHF) for Police, Fire and Government In-Building VHF Antenna Solutions
BusinessWire - Fri Jun 24, 1:04PM CDT
Pulse Electronics Corporation introduces the V-Thinity wideband, VHF in-building public safety antenna. Engineered to an aesthetically pleasing 1.5mm (.060 inch) thickness and optimized for low-frequency in-building environments, the V-Thinity (PSIBVHF) covers 132 to 174 MHz for Police, Fire and Government communications. The low-profile 380x380 mm (15x15 inch) antenna weighs only 550 grams and provides multi floor coverage. A bi-directional amplifier allows installers to avoid the nulls found with traditional dipoles.
Fish & Richardson Named to NLJ's "2016 Intellectual Property Hot List" for Fifth Straight Year
Marketwired - Wed Jun 08, 8:15AM CDT
BOSTON, MA--(Marketwired - Jun 8, 2016) - Fish & Richardson has been named to The National Law Journal's (NLJ) "2016 Intellectual Property Hot List" as one of the firms "that set the bar in intellectual property (IP) law in 2015, scoring big wins for clients." This is the fifth year that Fish has been named to the NLJ "IP Hot List," which the publication started in 2012.
Pulse Electronics Launches Willow Series Wideband Field-Tunable Mobile Antenna
BusinessWire - Wed May 25, 11:30AM CDT
Pulse Electronics Corporation introduces the Willow series of wideband mobile VHF, UHF, antennas. The Willow antennas are field tunable from 132-850 MHz with in impressive bandwidth of 24 MHz at VHF frequency and increasing to over 300 MHz at the higher bands. They utilize a 1/4 wave structure, with the rugged construction that made PulseLarsen famous. These antennas include a stainless steel spring and optional O-ring or SuperSeal gaskets for maximum waterproofing. The easy-tune design provides unity gain, long antenna life, reduces windflow-induced noise and survives maximum flexure cycles without degradation.
Pulse Electronics Announces Comprehensive Debt Refinancing
BusinessWire - Thu May 19, 5:09PM CDT
Pulse Electronics Corporation, a leading provider of electronic components, today announced that it has completed a refinancing of $80 million of its outstanding Term Loan facilities held by affiliates of investment funds managed by Oaktree Capital Management, L.P. ("Oaktree"
. In connection with the refinancing, Pulse will enter into a new, $80 million Term Loan facility with Oaktree.
Pulse Electronics' PIMinator Accessories Zero-In on DAS Network PIM Reduction
BusinessWire - Wed May 11, 7:03AM CDT
Pulse Electronics Corporation introduces two unique and performance-enhancing installation options for its PIMinator(R) line of distributed antenna system (DAS) in-building ceiling-mount antennas. The DASACHOLDER is a sturdy, plastic, above-ceiling antenna holder that is easy to install, is hidden above the ceiling so it doesn't interfere with the aesthetics of the building, and does not induce passive intermodulation (PIM) in in-building installations. The DASACABSORBER attaches to the plastic holder or surrounding structures and helps mitigate the effects of PIM sources by absorbing reflections on cellular radio frequencies in the transmit and receive bands. The result is a confirmed reduction of PIM energy by as much as 40dB.
Pulse Electronics Adds White Antennas to Popular Clarity Ultra-thin Ceiling-mount Antenna Family
BusinessWire - Tue Apr 19, 7:03AM CDT
Pulse Electronics Corporation introduces the Clarity(TM) White Antenna to its popular Clarity family of DAS, ultra-thin, ceiling-mount, omni-directional antennas. An extension of the translucent Clarity antenna family, the white antenna offers a lower cost, yet high performance antenna that fits the aesthetic requirements of many buildings and public places. It can be installed with Pulse's new solid-ceiling adapter which makes antenna installation amazingly simple, even in hard-pan ceilings without easy installation access.
Pulse Electronics Power BU Releases AEC-Q200 Qualified High Current, Low Profile Molded Power Inductor Series
BusinessWire - Wed Mar 30, 2:34PM CDT
Pulse Electronics Power BU, a leading provider of power magnetics components, expands upon its broad line-up of power inductors with the new PA434X series molded inductors. The PA434X series is comprised of 6 inductor sizes (PA4340, PA4341, PA4342, PA4343, PA4344 & PA4345) with profiles as low as 2.0mm, footprints ranging in size from 6x6mm to 17x17mm, and the highest energy storage density (uJ/cm3) of any Pulse inductor. Other features and benefits include high Isat and low DCR ratings, automated manufacturing for consistently outstanding quality and multiple competitive cross references.
Global Inductor Market - Global Forecast to 2020 - Key Players are Panasonic Corporation, Pulse Electronics Corporation & Vishay Intertechnology
GlobeNewswire - Mon Mar 07, 8:33AM CST
Research and Markets (http://www.researchandmarkets.com/research/pvp89c/inductor_market) has announced the addition of the "Inductor Market - Global Forecast to 2020" report to their offering.
VSH: 11.75 (+0.03)
Pulse Electronics Introduces Monarch Series Multi-Mode Satellite Navigation System Ceramic Antenna for GPS, GLONASS, Beidou, and Galileo
BusinessWire - Wed Jan 20, 7:03AM CST
Pulse Electronics Corporation's new Monarch Series multi-mode global navigation satellite system ceramic antennas provide wireless signal reception for the four major global and regional satellite systems: GPS, GLONASS, Beidou (Compass), and Galileo. The Monarch Series W3010 is a compact, low profile antenna that delivers high efficiency (75% typical) over a wide bandwidth for enhanced navigation and device tracking. With its profile of 3.2x10x2mm, low weight of 310mg, and VSWR of less than 1.6:1, the Monarch Series fits antenna requirements for items such as portable personal navigation devices, asset tracking equipment, mobile hot spots, mobile point-of-sale terminals, digital walkie-talkies, vehicle data recorders and video systems, public safety devices, telematics equipment, and Internet of Things devices.
Pulse Electronics' ProxAnt TL 1.0 Package Combines a Proximity Sensor with an Antenna to Optimize Both Functions
BusinessWire - Wed Dec 16, 7:03AM CST
Pulse Electronics Corporation introduces an all-in-one combination antenna and proximity sensor package to optimize the characteristics of both functions, thus enabling better device performance and increased design flexibility for tablets, laptops, and notebook computers. The ProxAnt TL 1.0 is a seven band main antenna, a proximity sensor chip, and all the needed components included on the same flexible circuit board. Without requiring physical contact, the sensor recognizes when it is close to the user and sends a signal to the host processor to reduce the transmission power to the antenna, thus lowering SAR. The sensor also recognizes movement to avoid a false trigger.
Pulse Electronics' Clarity-Pearl Antennas Aesthetically Improve Public Safety Radio Coverage of In-Building Repeater Systems
BusinessWire - Wed Dec 09, 11:26AM CST
Pulse Electronics Corporation introduces a new edition in the Clarity(R) family of antennas that operates at UHF band frequencies including 380-520 MHz and 698-960 MHz to improve public safety radio coverage. The Clarity-Pearl antennas deliver an architecturally pleasing solution to requirements set by the International Fire Code and National Fire Protection Association (IFC/NFPA) codes for public safety in-building communication. Their ultra-thin white UV stabilized plastic radome is 311mm in diameter and protrudes just 9.5mm below the ceiling for the lowest in-building antenna profile in the industry. They provide an antenna solution for challenges created by multi-story structures with weak propagation characteristics and basements with low ceilings.
Hall Effect Current Sensor Market by Technology, Type, Application and Geography - Global Forecast to 2020
M2 - Mon Dec 07, 5:13AM CST
Research and Markets (http://www.researchandmarkets.com/research/89j49j/hall_effect) has announced the addition of the "Hall Effect Current Sensor Market - Global Forecast to 2020" report to their offering. The Hall effect current sensor market is expected to grow from USD 737.2 million in 2015 to USD 1.10 billion by 2020, at a CAGR of 8.5% during the forecast period. The factors driving the Hall effect current sensor market are technological advancements (in sensors), easy installation process of these sensors, and use of galvanic isolation principle. The automotive industry holds the largest share in the hall effect current sensor market in 2015. The growth of the automotive electronic control systems is driven largely by the safety and driver convenience features, and is expected to significantly propel the demand of sensor technologies. As a result, the hall sensors, with their proven cost efficiency and performance, are emerging as the key technology with respect to the current measurement in automotive applications. Whereas consumer electronics is expected to grow at the highest CAGR in Hall effect current sensor market in the coming years. The Asia-Pacific region holds the largest share and expected to grow with highest CAGR in the hall effect current sensor market from 2015 to 2020. APAC's market is currently riding on a prosperous growth curve in terms of consumption of Hall effect current sensors for various applications. Industries such as consumer electronics, automotive, and industry automation are expected to exhibit high growth in this region. Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Market Overview 5 Hall Effect Current Sensor Market, By Technology 6 By Type 7 By Application 8 By Geography 9 Competitive Landscape 10 Company Profiles - Abb Ltd. - Allegro Microsystems, Llc - Asahi Kasei Microdevices Corporation - Electrohms Pvt Ltd - Honeywell Sensing & Controls - Infineon Technologies AG - Kohshin Electric Corporation - Lem Holding SA - Melexis NV - Micronas Semiconductor Holdings AG - Pulse Electronics Corporation - Stmicroelectronics NV - TDK Corporation - Tamura Corporation - Texas Instruments Inc. - Vacuumschmelze GMBH & Co. KG For more information visit http://www.researchandmarkets.com/research/89...all_effect
HON: 116.11 (-0.71), TXN: 61.77 (+0.71)
Pulse Electronics' Antenna Miniaturization Technology Enables High Data Rates in Tight Spaces that Require 3x3 MIMO Configurations
BusinessWire - Thu Dec 03, 7:03AM CST
Pulse Electronics Corporation introduces a new method of constructing antennas to enable high data rates in tight spaces that require 3x3 multiple input multiple output (MIMO) configurations such as tablets, laptops, and notebook computers. Pulse's DenseAnt TL 1.0 advanced manufacturing antenna technology fits three WLAN antennas in physically the same volume as was used for two LDS antennas without compromising performance or isolation. The antenna is composed of high dielectric materials to realize a 4-decibel improvement in isolation over standard plastic substrates, achieving higher performance even when integrated in close proximity with each other. The antennas are customized for each application and configuration, optimizing them for size and performance.
Pulse Electronics' Plume Series Dual-Band Flexible Internal Antenna is Smaller and More Efficient for IoT Applications
BusinessWire - Mon Nov 30, 11:39AM CST
Pulse Electronics Corporation introduces a new internal dual-band flexible printed circuit (FPC) antenna to provide connectivity and data transmission for Internet of Things applications in security, home automation, appliances, lighting, medical/telemedicine, sensors, network monitoring, data collection, wearables, automotive, in-vehicle communication, and vending. The Plume Series W3315B0100 WiFi very compact 6 x 45mm antenna has a maximum antenna gain of 2 dBi on the low band and 5dBi on the upper band with over 60% efficiency across the bands.
Pulse Electronics' Panther Series GPS/Multiband Vehicle-Mount Antenna Improves Data Throughput and GPS Navigation
BusinessWire - Tue Nov 10, 7:03AM CST
Pulse Electronics Corporation introduces a new combination GPS/multiband vehicle-mount antenna with superior port-to-port isolation for excellent signal clarity. An optional magnetic mount base makes this antenna easy to install and remove without drilling a hole in the vehicle. Pulse's GPSMB501 antenna consists of five connectors to access five antenna solutions--two MIMO cellular and two dual-band MIMO WLAN and one for a global navigation satellite system (GPS plus Glonass). The Panther GPS multiband antenna improves data throughput and navigation for telematics, infotainment, and location-based applications in all types of fleet, public safety, delivery, utility, and transit vehicles.
Pulse Electronics' Clarity DAS Clear Ceiling Antennas Selected to Enable Wireless Communication in the World Trade Center, New York City
BusinessWire - Wed Oct 21, 7:03AM CDT
Pulse Electronics Corporation announces that its Clarity family of antennas has been selected by a major US wireless carrier to enable wireless network coverage in a key building of the World Trade Center complex in New York, NY. Over 700 of Pulse's Clarity DASUTCCR500NF distributed antenna system (DAS) ultra-thin, clear, ceiling-mount antennas will be deployed in the building.
Pulse Electronics Offers High Isolation Power Transformers in Low Profile SMT Package
BusinessWire - Tue Sep 22, 7:03AM CDT
Pulse Electronics Corporation, a leading provider of electronic components, introduces a new series of 5KVrms isolation power transformers for communications interfaces such as RS485, CAN, MODBus, and ProfiBus for automation, automotive, and smart grid applications. The PH9385 transformer series achieves 12mm creepage in a patent-pending, low-profile, compact, 17x16x7mm surface mount package.
Pulse Electronics' Isolation Power Transformers Offer 2.5KV Isolation for Communications Interface Applications
BusinessWire - Wed Sep 09, 7:04AM CDT
Pulse Electronics Corporation, a leading provider of electronic components, introduces a new series of power transformers that offers isolation to communication interfaces such as RS485, CAN, MODBus, and ProfiBus for automation, automotive, and smart grid applications. The PH9085 Series is part of Pulse Electronics' isolation transformer line that offers a range of insulation (functional to reinforced) and isolation (up to 5KVrms) capabilities.
From 2D to 3D Printed Electronics 2015-2025
M2 - Tue Aug 18, 2:56AM CDT
Research and Markets (http://www.researchandmarkets.com/research/ld87k9/from_2d_to_3d) has announced the addition of the "From 2D to 3D Printed Electronics 2015-2025" report to their offering. The 3D printing industry created a tsunami of hype in 2012 with the advent of the world's first consumer-level 3D printers. This hype around consumer-level technologies made 3D printing a household name. Surprisingly, this culminated in rapid growth across the entire industry including established players offering high-end industrial equipment. The same pattern will repeat in 2016 with the advent of a new breed of printers capable of depositing electrically conductive and insulating materials: the first step towards 3D printed electronics. Customers funding first generation machines have already spent over $800k on Kickstarter alone. These consumer-level machines will drive the hype but next generation machines aimed at professional use will become the largest commercial markets over the next decade by servicing professional prototyping and manufacturing end users. In addition we have the first truly 3D electronics printer coming to market in 2015 and the impact it will have is unknown. We explain why some candidate applications will not succeed commercially and identify two main applications that will create a total market worth over $1bn by 2025 thanks to core advantages over competing technologies and huge addressable markets. In addition we explore many potential applications for fully 3D printed electronics. This report discusses all existing and emerging technologies that span 2D and 3D printed electronics, all major applications, all players bringing products to market in this space. Specifically, the inkjetting of conductive and insulating inks, extrusion of conductive pastes and insulators and the Aerosol Jet technology. The following technologies are covered in detail including lists of all major vendors for each technology type and SWOT analyses quantifying characteristics such as equipment and material prices, conductivities and precision: - Inkjetting conductive and insulating inks - Extrusion of conductive metals and insulating thermoplastics - Extrusion of conductive pastes and insulating thermoplastics - Aerosol Jet The following materials are covered: - Metals - Conductive thermoplastics - Conductive inks - Conductive pastes - Conductive photopolymers Eighteen potential commercial applications of 3D printed electronics are considered, most of which have already been demonstrated in the lab. All major players are covered including SWOT analyses comparing their commercial products and technologies. This report gives forecasts to 2025 broken down into the following market sectors: - Consumer. - Education. - Professional PCB prototyping. - Antenna manufacture Restraints that are inhibiting the uptake of 3D printed electronics are covered as well as drivers. Key Topics Covered: 1. Executive Summary 2. Introduction 3. Traditional Pcbs 4. Materials 5. Applications 6. Technologies 7. Competing Technologies 8. Players 9. Research Institutes 10. Markets And Forecasts Companies Mentioned - AgIC - BotFactory - Cartesian Co - Ceradrop - NanoDimension - Neotech AMT - Novacentrix and nScrypt - Optomec - Pulse Electronics - Voltera - Voxel8 For more information visit http://www.researchandmarkets.com/research/ld...m_2d_to_3d
Pulse Electronics Introduces the Ultra-Thin V-Thinity (PSIBVHF) for Police, Fire and Government In-Building VHF Antenna Solutions
BusinessWire - Fri Jun 24, 1:04PM CDT
Pulse Electronics Corporation introduces the V-Thinity wideband, VHF in-building public safety antenna. Engineered to an aesthetically pleasing 1.5mm (.060 inch) thickness and optimized for low-frequency in-building environments, the V-Thinity (PSIBVHF) covers 132 to 174 MHz for Police, Fire and Government communications. The low-profile 380x380 mm (15x15 inch) antenna weighs only 550 grams and provides multi floor coverage. A bi-directional amplifier allows installers to avoid the nulls found with traditional dipoles.
Fish & Richardson Named to NLJ's "2016 Intellectual Property Hot List" for Fifth Straight Year
Marketwired - Wed Jun 08, 8:15AM CDT
BOSTON, MA--(Marketwired - Jun 8, 2016) - Fish & Richardson has been named to The National Law Journal's (NLJ) "2016 Intellectual Property Hot List" as one of the firms "that set the bar in intellectual property (IP) law in 2015, scoring big wins for clients." This is the fifth year that Fish has been named to the NLJ "IP Hot List," which the publication started in 2012.
Pulse Electronics Launches Willow Series Wideband Field-Tunable Mobile Antenna
BusinessWire - Wed May 25, 11:30AM CDT
Pulse Electronics Corporation introduces the Willow series of wideband mobile VHF, UHF, antennas. The Willow antennas are field tunable from 132-850 MHz with in impressive bandwidth of 24 MHz at VHF frequency and increasing to over 300 MHz at the higher bands. They utilize a 1/4 wave structure, with the rugged construction that made PulseLarsen famous. These antennas include a stainless steel spring and optional O-ring or SuperSeal gaskets for maximum waterproofing. The easy-tune design provides unity gain, long antenna life, reduces windflow-induced noise and survives maximum flexure cycles without degradation.
Pulse Electronics Announces Comprehensive Debt Refinancing
BusinessWire - Thu May 19, 5:09PM CDT
Pulse Electronics Corporation, a leading provider of electronic components, today announced that it has completed a refinancing of $80 million of its outstanding Term Loan facilities held by affiliates of investment funds managed by Oaktree Capital Management, L.P. ("Oaktree"
. In connection with the refinancing, Pulse will enter into a new, $80 million Term Loan facility with Oaktree. Pulse Electronics' PIMinator Accessories Zero-In on DAS Network PIM Reduction
BusinessWire - Wed May 11, 7:03AM CDT
Pulse Electronics Corporation introduces two unique and performance-enhancing installation options for its PIMinator(R) line of distributed antenna system (DAS) in-building ceiling-mount antennas. The DASACHOLDER is a sturdy, plastic, above-ceiling antenna holder that is easy to install, is hidden above the ceiling so it doesn't interfere with the aesthetics of the building, and does not induce passive intermodulation (PIM) in in-building installations. The DASACABSORBER attaches to the plastic holder or surrounding structures and helps mitigate the effects of PIM sources by absorbing reflections on cellular radio frequencies in the transmit and receive bands. The result is a confirmed reduction of PIM energy by as much as 40dB.
Pulse Electronics Adds White Antennas to Popular Clarity Ultra-thin Ceiling-mount Antenna Family
BusinessWire - Tue Apr 19, 7:03AM CDT
Pulse Electronics Corporation introduces the Clarity(TM) White Antenna to its popular Clarity family of DAS, ultra-thin, ceiling-mount, omni-directional antennas. An extension of the translucent Clarity antenna family, the white antenna offers a lower cost, yet high performance antenna that fits the aesthetic requirements of many buildings and public places. It can be installed with Pulse's new solid-ceiling adapter which makes antenna installation amazingly simple, even in hard-pan ceilings without easy installation access.
Pulse Electronics Power BU Releases AEC-Q200 Qualified High Current, Low Profile Molded Power Inductor Series
BusinessWire - Wed Mar 30, 2:34PM CDT
Pulse Electronics Power BU, a leading provider of power magnetics components, expands upon its broad line-up of power inductors with the new PA434X series molded inductors. The PA434X series is comprised of 6 inductor sizes (PA4340, PA4341, PA4342, PA4343, PA4344 & PA4345) with profiles as low as 2.0mm, footprints ranging in size from 6x6mm to 17x17mm, and the highest energy storage density (uJ/cm3) of any Pulse inductor. Other features and benefits include high Isat and low DCR ratings, automated manufacturing for consistently outstanding quality and multiple competitive cross references.
Global Inductor Market - Global Forecast to 2020 - Key Players are Panasonic Corporation, Pulse Electronics Corporation & Vishay Intertechnology
GlobeNewswire - Mon Mar 07, 8:33AM CST
Research and Markets (http://www.researchandmarkets.com/research/pvp89c/inductor_market) has announced the addition of the "Inductor Market - Global Forecast to 2020" report to their offering.
VSH: 11.75 (+0.03)
Pulse Electronics Introduces Monarch Series Multi-Mode Satellite Navigation System Ceramic Antenna for GPS, GLONASS, Beidou, and Galileo
BusinessWire - Wed Jan 20, 7:03AM CST
Pulse Electronics Corporation's new Monarch Series multi-mode global navigation satellite system ceramic antennas provide wireless signal reception for the four major global and regional satellite systems: GPS, GLONASS, Beidou (Compass), and Galileo. The Monarch Series W3010 is a compact, low profile antenna that delivers high efficiency (75% typical) over a wide bandwidth for enhanced navigation and device tracking. With its profile of 3.2x10x2mm, low weight of 310mg, and VSWR of less than 1.6:1, the Monarch Series fits antenna requirements for items such as portable personal navigation devices, asset tracking equipment, mobile hot spots, mobile point-of-sale terminals, digital walkie-talkies, vehicle data recorders and video systems, public safety devices, telematics equipment, and Internet of Things devices.
Pulse Electronics' ProxAnt TL 1.0 Package Combines a Proximity Sensor with an Antenna to Optimize Both Functions
BusinessWire - Wed Dec 16, 7:03AM CST
Pulse Electronics Corporation introduces an all-in-one combination antenna and proximity sensor package to optimize the characteristics of both functions, thus enabling better device performance and increased design flexibility for tablets, laptops, and notebook computers. The ProxAnt TL 1.0 is a seven band main antenna, a proximity sensor chip, and all the needed components included on the same flexible circuit board. Without requiring physical contact, the sensor recognizes when it is close to the user and sends a signal to the host processor to reduce the transmission power to the antenna, thus lowering SAR. The sensor also recognizes movement to avoid a false trigger.
Pulse Electronics' Clarity-Pearl Antennas Aesthetically Improve Public Safety Radio Coverage of In-Building Repeater Systems
BusinessWire - Wed Dec 09, 11:26AM CST
Pulse Electronics Corporation introduces a new edition in the Clarity(R) family of antennas that operates at UHF band frequencies including 380-520 MHz and 698-960 MHz to improve public safety radio coverage. The Clarity-Pearl antennas deliver an architecturally pleasing solution to requirements set by the International Fire Code and National Fire Protection Association (IFC/NFPA) codes for public safety in-building communication. Their ultra-thin white UV stabilized plastic radome is 311mm in diameter and protrudes just 9.5mm below the ceiling for the lowest in-building antenna profile in the industry. They provide an antenna solution for challenges created by multi-story structures with weak propagation characteristics and basements with low ceilings.
Hall Effect Current Sensor Market by Technology, Type, Application and Geography - Global Forecast to 2020
M2 - Mon Dec 07, 5:13AM CST
Research and Markets (http://www.researchandmarkets.com/research/89j49j/hall_effect) has announced the addition of the "Hall Effect Current Sensor Market - Global Forecast to 2020" report to their offering. The Hall effect current sensor market is expected to grow from USD 737.2 million in 2015 to USD 1.10 billion by 2020, at a CAGR of 8.5% during the forecast period. The factors driving the Hall effect current sensor market are technological advancements (in sensors), easy installation process of these sensors, and use of galvanic isolation principle. The automotive industry holds the largest share in the hall effect current sensor market in 2015. The growth of the automotive electronic control systems is driven largely by the safety and driver convenience features, and is expected to significantly propel the demand of sensor technologies. As a result, the hall sensors, with their proven cost efficiency and performance, are emerging as the key technology with respect to the current measurement in automotive applications. Whereas consumer electronics is expected to grow at the highest CAGR in Hall effect current sensor market in the coming years. The Asia-Pacific region holds the largest share and expected to grow with highest CAGR in the hall effect current sensor market from 2015 to 2020. APAC's market is currently riding on a prosperous growth curve in terms of consumption of Hall effect current sensors for various applications. Industries such as consumer electronics, automotive, and industry automation are expected to exhibit high growth in this region. Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Market Overview 5 Hall Effect Current Sensor Market, By Technology 6 By Type 7 By Application 8 By Geography 9 Competitive Landscape 10 Company Profiles - Abb Ltd. - Allegro Microsystems, Llc - Asahi Kasei Microdevices Corporation - Electrohms Pvt Ltd - Honeywell Sensing & Controls - Infineon Technologies AG - Kohshin Electric Corporation - Lem Holding SA - Melexis NV - Micronas Semiconductor Holdings AG - Pulse Electronics Corporation - Stmicroelectronics NV - TDK Corporation - Tamura Corporation - Texas Instruments Inc. - Vacuumschmelze GMBH & Co. KG For more information visit http://www.researchandmarkets.com/research/89...all_effect
HON: 116.11 (-0.71), TXN: 61.77 (+0.71)
Pulse Electronics' Antenna Miniaturization Technology Enables High Data Rates in Tight Spaces that Require 3x3 MIMO Configurations
BusinessWire - Thu Dec 03, 7:03AM CST
Pulse Electronics Corporation introduces a new method of constructing antennas to enable high data rates in tight spaces that require 3x3 multiple input multiple output (MIMO) configurations such as tablets, laptops, and notebook computers. Pulse's DenseAnt TL 1.0 advanced manufacturing antenna technology fits three WLAN antennas in physically the same volume as was used for two LDS antennas without compromising performance or isolation. The antenna is composed of high dielectric materials to realize a 4-decibel improvement in isolation over standard plastic substrates, achieving higher performance even when integrated in close proximity with each other. The antennas are customized for each application and configuration, optimizing them for size and performance.
Pulse Electronics' Plume Series Dual-Band Flexible Internal Antenna is Smaller and More Efficient for IoT Applications
BusinessWire - Mon Nov 30, 11:39AM CST
Pulse Electronics Corporation introduces a new internal dual-band flexible printed circuit (FPC) antenna to provide connectivity and data transmission for Internet of Things applications in security, home automation, appliances, lighting, medical/telemedicine, sensors, network monitoring, data collection, wearables, automotive, in-vehicle communication, and vending. The Plume Series W3315B0100 WiFi very compact 6 x 45mm antenna has a maximum antenna gain of 2 dBi on the low band and 5dBi on the upper band with over 60% efficiency across the bands.
Pulse Electronics' Panther Series GPS/Multiband Vehicle-Mount Antenna Improves Data Throughput and GPS Navigation
BusinessWire - Tue Nov 10, 7:03AM CST
Pulse Electronics Corporation introduces a new combination GPS/multiband vehicle-mount antenna with superior port-to-port isolation for excellent signal clarity. An optional magnetic mount base makes this antenna easy to install and remove without drilling a hole in the vehicle. Pulse's GPSMB501 antenna consists of five connectors to access five antenna solutions--two MIMO cellular and two dual-band MIMO WLAN and one for a global navigation satellite system (GPS plus Glonass). The Panther GPS multiband antenna improves data throughput and navigation for telematics, infotainment, and location-based applications in all types of fleet, public safety, delivery, utility, and transit vehicles.
Pulse Electronics' Clarity DAS Clear Ceiling Antennas Selected to Enable Wireless Communication in the World Trade Center, New York City
BusinessWire - Wed Oct 21, 7:03AM CDT
Pulse Electronics Corporation announces that its Clarity family of antennas has been selected by a major US wireless carrier to enable wireless network coverage in a key building of the World Trade Center complex in New York, NY. Over 700 of Pulse's Clarity DASUTCCR500NF distributed antenna system (DAS) ultra-thin, clear, ceiling-mount antennas will be deployed in the building.
Pulse Electronics Offers High Isolation Power Transformers in Low Profile SMT Package
BusinessWire - Tue Sep 22, 7:03AM CDT
Pulse Electronics Corporation, a leading provider of electronic components, introduces a new series of 5KVrms isolation power transformers for communications interfaces such as RS485, CAN, MODBus, and ProfiBus for automation, automotive, and smart grid applications. The PH9385 transformer series achieves 12mm creepage in a patent-pending, low-profile, compact, 17x16x7mm surface mount package.
Pulse Electronics' Isolation Power Transformers Offer 2.5KV Isolation for Communications Interface Applications
BusinessWire - Wed Sep 09, 7:04AM CDT
Pulse Electronics Corporation, a leading provider of electronic components, introduces a new series of power transformers that offers isolation to communication interfaces such as RS485, CAN, MODBus, and ProfiBus for automation, automotive, and smart grid applications. The PH9085 Series is part of Pulse Electronics' isolation transformer line that offers a range of insulation (functional to reinforced) and isolation (up to 5KVrms) capabilities.
From 2D to 3D Printed Electronics 2015-2025
M2 - Tue Aug 18, 2:56AM CDT
Research and Markets (http://www.researchandmarkets.com/research/ld87k9/from_2d_to_3d) has announced the addition of the "From 2D to 3D Printed Electronics 2015-2025" report to their offering. The 3D printing industry created a tsunami of hype in 2012 with the advent of the world's first consumer-level 3D printers. This hype around consumer-level technologies made 3D printing a household name. Surprisingly, this culminated in rapid growth across the entire industry including established players offering high-end industrial equipment. The same pattern will repeat in 2016 with the advent of a new breed of printers capable of depositing electrically conductive and insulating materials: the first step towards 3D printed electronics. Customers funding first generation machines have already spent over $800k on Kickstarter alone. These consumer-level machines will drive the hype but next generation machines aimed at professional use will become the largest commercial markets over the next decade by servicing professional prototyping and manufacturing end users. In addition we have the first truly 3D electronics printer coming to market in 2015 and the impact it will have is unknown. We explain why some candidate applications will not succeed commercially and identify two main applications that will create a total market worth over $1bn by 2025 thanks to core advantages over competing technologies and huge addressable markets. In addition we explore many potential applications for fully 3D printed electronics. This report discusses all existing and emerging technologies that span 2D and 3D printed electronics, all major applications, all players bringing products to market in this space. Specifically, the inkjetting of conductive and insulating inks, extrusion of conductive pastes and insulators and the Aerosol Jet technology. The following technologies are covered in detail including lists of all major vendors for each technology type and SWOT analyses quantifying characteristics such as equipment and material prices, conductivities and precision: - Inkjetting conductive and insulating inks - Extrusion of conductive metals and insulating thermoplastics - Extrusion of conductive pastes and insulating thermoplastics - Aerosol Jet The following materials are covered: - Metals - Conductive thermoplastics - Conductive inks - Conductive pastes - Conductive photopolymers Eighteen potential commercial applications of 3D printed electronics are considered, most of which have already been demonstrated in the lab. All major players are covered including SWOT analyses comparing their commercial products and technologies. This report gives forecasts to 2025 broken down into the following market sectors: - Consumer. - Education. - Professional PCB prototyping. - Antenna manufacture Restraints that are inhibiting the uptake of 3D printed electronics are covered as well as drivers. Key Topics Covered: 1. Executive Summary 2. Introduction 3. Traditional Pcbs 4. Materials 5. Applications 6. Technologies 7. Competing Technologies 8. Players 9. Research Institutes 10. Markets And Forecasts Companies Mentioned - AgIC - BotFactory - Cartesian Co - Ceradrop - NanoDimension - Neotech AMT - Novacentrix and nScrypt - Optomec - Pulse Electronics - Voltera - Voxel8 For more information visit http://www.researchandmarkets.com/research/ld...m_2d_to_3d
