$WOGI's PRS- Paraffin Remediation Solution
PRS©is applied to paraffin build-up by using the chemical with adequate amounts of good crude oil and agitation PRS© breaks down the paraffin, causing the oil in the paraffin to go into solution and stay in solution with the good crude until refining may take place. Basic substances and solids will be suspended with agitation and can be easily pumped off. This process may also be applied to saltwater disposal systems. Not only does our process work effectively, it is also one of the most cost-effective treatments available to industry.
is at least three (3) to five (5) times more efficient, on a volume basis, than any other known Environmentally Safe Paraffin Remediation Solution (PRS). Once dispersed and dissolved, the paraffin remains dissolved (when PRS©is properly applied).PRS© has been proven to work where solvents and products have not or could not. Heavy crude oil viscosity losses up to 90% have been observed. When applied to your producing wells, PRS© disperses paraffin deposits as well as scale-like deposits which occur in the well bore, perforations, and pump during down hole operations.
In addition to eliminating paraffin build-up around the tubing and pumping components, existing and future deposits will also be eliminated and prevented from accumulating in your flow lines and separators. PRS© also keeps the heater-treater operating more effectively by reducing internal build-up.
By lowering the oil viscosity, there is an increase in the amount of well flow. This provides improved above-ground handling as it lowers costs due to less heating of oil to make it flow. By keeping the paraffin build-up low, there is a reduction in pressure increases normally resulting from the plugging of formations. Improved overall well production is obtained by maintaining an improved degree of internal well cleanliness. By adding
PRS©to down hole operations, one can increase the effectiveness of scale and corrosion inhibitors, plus keep waxy deposits out of water-handling facilities.
Subsea/Offshore Wells
Use of organic solvents in sub-sea flow lines especially in deep water has never been efficient. The generation of paraffin crystals are caused by the initial temperature of crystals with the lightest temperatures at which the solid phase in the oil is first initiated. When you have oil submitted to a previous thermal treatment at a controlled cooling rate you are going to have paraffin problems. The best way to prevent paraffin problems is by injecting
PRS© on a continuous daily basis. This will avoid the use of expensive mechanical methods such as pigs, scrapers, knives, hot oil, and the use of organic solvents.
By treating wells with Paraffin Remediation Solution-PRS, the wells will then not require being hot water washed or hot oil washed every 3 to 4 weeks to dissolve the paraffin wax from the walls, from pumping equipment, from the casing and from clogged tubing and perforations. This hot washing operation melts the waxes and drops them back down the well.
http://worldoilgroup.ning.com/paraffin-remedi...n-solution
PRS©is applied to paraffin build-up by using the chemical with adequate amounts of good crude oil and agitation PRS© breaks down the paraffin, causing the oil in the paraffin to go into solution and stay in solution with the good crude until refining may take place. Basic substances and solids will be suspended with agitation and can be easily pumped off. This process may also be applied to saltwater disposal systems. Not only does our process work effectively, it is also one of the most cost-effective treatments available to industry.
is at least three (3) to five (5) times more efficient, on a volume basis, than any other known Environmentally Safe Paraffin Remediation Solution (PRS). Once dispersed and dissolved, the paraffin remains dissolved (when PRS©is properly applied).PRS© has been proven to work where solvents and products have not or could not. Heavy crude oil viscosity losses up to 90% have been observed. When applied to your producing wells, PRS© disperses paraffin deposits as well as scale-like deposits which occur in the well bore, perforations, and pump during down hole operations.
In addition to eliminating paraffin build-up around the tubing and pumping components, existing and future deposits will also be eliminated and prevented from accumulating in your flow lines and separators. PRS© also keeps the heater-treater operating more effectively by reducing internal build-up.
By lowering the oil viscosity, there is an increase in the amount of well flow. This provides improved above-ground handling as it lowers costs due to less heating of oil to make it flow. By keeping the paraffin build-up low, there is a reduction in pressure increases normally resulting from the plugging of formations. Improved overall well production is obtained by maintaining an improved degree of internal well cleanliness. By adding
PRS©to down hole operations, one can increase the effectiveness of scale and corrosion inhibitors, plus keep waxy deposits out of water-handling facilities.
Subsea/Offshore Wells
Use of organic solvents in sub-sea flow lines especially in deep water has never been efficient. The generation of paraffin crystals are caused by the initial temperature of crystals with the lightest temperatures at which the solid phase in the oil is first initiated. When you have oil submitted to a previous thermal treatment at a controlled cooling rate you are going to have paraffin problems. The best way to prevent paraffin problems is by injecting
PRS© on a continuous daily basis. This will avoid the use of expensive mechanical methods such as pigs, scrapers, knives, hot oil, and the use of organic solvents.
By treating wells with Paraffin Remediation Solution-PRS, the wells will then not require being hot water washed or hot oil washed every 3 to 4 weeks to dissolve the paraffin wax from the walls, from pumping equipment, from the casing and from clogged tubing and perforations. This hot washing operation melts the waxes and drops them back down the well.
http://worldoilgroup.ning.com/paraffin-remedi...n-solution
1
