Drip-free fluid connectors enable power module hot-swaps on

New Post Public Reply Private Reply Replies (0) Message Board
News Desk 2018
Drip-free fluid connectors enable power module hot-swaps on liquid-cooled TV broadcast transmitters

ST. PAUL, Minn., Oct. 28, 2015 (GLOBE NEWSWIRE) -- For nearly 100 years, GatesAir has supplied broadcasters with some of the industry's most operationally efficient analog and digital transmitters. In television, its wireless UHF and VHF solutions span a range of power requirements from single-station over-the-air broadcasters to large national networks in the U.S. and around the world. When the company recently redesigned its liquid-cooled Maxiva™ ULXT UHF TV transmitter, it turned to fluid connector expert CPC for a reliable and drip-free quick disconnect solution.

Television broadcast transmitters generate large amounts of waste heat that must be removed in order to prevent damage to electronic components. Many smaller transmitter power modules are air-cooled. For larger transmitters, air cooling is expensive to operate, noisy and a major contributor to facility air conditioning loads. Liquid cooling, on the other hand, has more efficient heat-transfer characteristics, runs quietly, is more economical to operate and reduces total heat in the facility. There is one drawback, however. Liquid cooling brings water or other coolant into proximity with electrical components — where any leak, no matter how small, is likely to have dire consequences.

"GatesAir came to us in the early stages of their product development. They needed a bullet-proof fluid coupling , one that would allow transmitter operators to hot-swap individual transmitter power modules with no risk of coolant leaks," said David Vranish, liquid cooling applications engineer with CPC.

The application required the coupling to remain connected for long periods of time and then to disconnect without leaking a drop of fluid. CPC initially designed a quick disconnect that connected manually with a thumb latch. Each half of the connector incorporated an internal valve that would open upon connection and close upon disconnection without leaking. Made of brass and featuring injection-molded, dripless plastic valves, the design satisfied the application's original performance requirements. This development later led to CPC's release of the LQ6 connector series.

Connector requirements change

As its new transmitter design developed, GatesAir required a coupling that could connect without direct operator intervention. Transmitters consist of a series of stacked-up and rack-mounted power modules. The number of modules determines the total power output. GatesAir now aimed for a design where individual modules would slide into the rack while simultaneously plugging into built-in electrical and coolant connections on the back of each transmitter rack (called a power block).

"We saw the industry's interest in an all-in-one power module connection for electrical and liquid cooling," explained Al Davis, manager of mechanical engineering for GatesAir, "and we wanted to deliver this ease of use to our customers." Power modules are removed for replacement or maintenance only a couple of times a year, so connectors need to be able to remain connected for months on end and then disconnect easily without leaking. "The connector we selected would also have to withstand long-term use," added Davis, "because GatesAir transmitters can be upgraded in the field to newer digital standards for extended product life."

The new manifold design approach sent Vranish and CPC's engineering team back to the drawing board. "What we did was take the LQ6 design we originally created for GatesAir, removed the latching mechanism and remade the connector in a rack-and-panel form," said Vranish. CPC kept the redundant seal in the connected state, as well as the frictionless valve, because these features were integral to the connector's non-spill performance. To aid in aligning the two connector halves when the power module is pushed against the back of the transmitter rack, CPC designed a special internal connector geometry with "axial tolerance engagement." Explained Vranish, "This tolerance means the connectors do not have to be fully connected to maintain full flow; there can be a slight gap because the valve design is very forgiving."

Other connector design changes included switching the housing material from brass to aluminum to reduce the unit's weight and eliminate any potential for galvanic corrosion in the system. To keep the connection forces low, CPC designed the two halves of the connectors to seal against each other using Quad-Ring® seals for their low friction properties. CPC also designed the connectors to terminate to the manifold using a standard SAE joint, typical of hydraulic joints, to ensure the connection was leak-free and easy to install. The final product's double-sealed internal valves are injection-molded from polysulfone, a strong, high-temperature and chemical-resistant thermal plastic that results in a lightweight and rugged connector.

Reliability is the key

Leak-free reliability was a primary objective for GatesAir and one of the key reasons its supplier search led to CPC. "Right now there is equipment with CPC connectors that has been operating in our lab for well over a year. Plus there are more than 100 CPC-equipped transmitter systems in the field, and these have each been operating for six months or longer," reported Davis. "We have yet to see a failure in the lab or in the field." Other attributes of the CPC connector that GatesAir liked were the low insertion force required in comparison to other connectors the company reviewed and the good flow vs. pressure characteristics of the internal valves, important for optimum coolant flow.

To live up to its promise of quality and reliability, CPC inspects and leak-tests every GatesAir connector before it leaves CPC's facility. "We are committed to shipping connectors that are 100 percent functioning and leak-proof," said Vranish.

Keeping it simple

"We do a lot with our transmitter designs to reduce the cost of ownership for our customers," said Davis. "With liquid cooling, we can transfer the heat load outside the building, which helps our customers save on air conditioning expenses." The GatesAir liquid cooling system operates with an inlet coolant temperature of 55 degrees C (131 degrees F) and an outlet temperature of 65 degrees C (149 degrees F) at 40 psi. Two redundant coolant pumps located within the power block on smaller transmitters or externally on larger systems maintain pressure. A liquid-air heat exchanger located outside of the building, usually on the roof, dissipates the heat. "The ability to confidently employ liquid cooling in an electronics environment is hugely dependent upon fluid connectors that don't leak," said Vranish, "regardless of how long they remain in a connected state prior to disconnection."

In addition to reducing air conditioning loads, the new Maxiva transmitter design minimizes downtime due to maintenance. "The removal and insertion of an individual power module can be done while the transmitter is operating, making it plug-and-play, thanks in part to the CPC connectors," reported Davis. The transmitter module slides into the rack on rails and engages guide-pins that lift the module to line up with both the fluid connectors and the electrical connectors. "Then the module simply pushes in."

Positive results

The relationship between GatesAir and CPC has been positive for both companies. GatesAir has a new UHF transmitter with the market-driven features it set out to achieve: a reduced footprint, high liquid-cooled efficiency and a low cost of ownership. In turn, GatesAir's application led CPC to develop a new line of connectors specially designed for liquid cooling.

"This experience has been outstanding," Davis summed up. "CPC was easy to work with and very collaborative in sharing ideas and coming up with ways to meet our requirements. In the end, we've simplified the operation of our transmitters while eliminating downtime for our customers."

About CPC

CPC (Colder Products Company) is the leading provider of quick disconnect couplings, fittings and connectors for the life sciences, bioprocessing, industrial and chemical handling markets. CPC is a business unit of Downers Grove, IL based Dover Corporation. For a free catalog or more information, contact: Colder Products Company, 1001 Westgate Drive, St. Paul, MN 55114. Phone: 651-645-0091. Toll-free: 800-444-2474. Fax: 651-645-5404. Web: cpcworldwide.com

CPC, Colder Products, Colder Products Company and Dover are registered trademarks with the U.S. Patent & Trademark office.

A photo accompanying this release is available at: http://www.globenewswire.com/newsroom/prs/?pkgid=37241

Editorial Contact: Susan McPherson Creative Communications Consultants, Inc. Tel: +1 612-677-2182 Email:

Scroll down for more posts ▼

Top 10 Most Recent News Articles

Lymphatic Research Gains Attention Beyond Wellness Claims

Updated Category News Views 488

Ankles leave little clues after a long day: sock grooves, puffiness, that dull heaviness nobody bothers to name. PureHealth Research wants people to look past the usual salt-and-water explanation and consider the lymphatic system, the body’s comparatively unsung network for gathering fluid from tissues and returning it to the bloodstream. Fair enough. This system does...

Continue Reading
PettiChat’s Digital Pet Twin Has Real Consumer Pull

Updated Category News Views 389

A Collar Gadget Is Chasing the Empty-House Problem Leave a dog or cat alone for a few hours and plenty of owners turn into amateur detectives. Did the cat eat? Has the dog been pacing? Why was that one weird noise caught on the home camera? Seattle startup PettiChat is trying to turn that itch into a product category with PettiLive!, a screen-based version of a pet that...

Continue Reading
Sitting, Lymph Flow, and a Supplement Maker's Pitch

Updated Category News Views 299

By late afternoon, a chair can feel like it has quietly won the argument against your legs. PureHealth Research is leaning into that familiar heavy, puffy-legged feeling with a reminder about lymphatic flow—and, naturally, an eight-ingredient supplement positioned alongside it. The broad message is sensible. The sales layer needs the usual healthy squint. Movement Does...

Continue Reading
Fractional CIOs Bring Order to Growing Technology Chaos

Updated Category News Views 248

A company can outgrow its technology habits long before anyone notices the smoke. One day the owner is approving another software subscription, the office manager is chasing an internet provider, and the tech person is putting out password fires. None of that looks dramatic in isolation. Together, it is a business operating without a map. That is the useful point in the...

Continue Reading
Human Frontier Mission Puts AI Research on Display

Updated Category News Views 348

A laboratory notebook is about to become the real product in this AI experiment. Human Frontier Mission, or HFM, says it will launch globally on Nov. 24, opening a research program where domain specialists frame scientific and engineering problems while autonomous AI agents develop and test possible answers. The unusual bit is not merely handing models difficult work. It...

Continue Reading
Ajman Memory Gives Heritage a Durable Digital Backbone

Updated Category News Views 303

Archives usually get applause only after somebody realizes a piece of history has vanished. Ajman is trying to skip that miserable part. During the Ajman Media Forum 2026, held November 18 and 19 at the Emirates Hospitality Centre, the emirate launched Ajman Memory, a project built to collect, document and preserve photographs, papers and video recording its development....

Continue Reading
UAE Trust Model Faces Its Hardest Test During Crisis

Updated Category News Views 371

A country’s reputation is usually invisible right up until the machinery rattles. Then people, investors, trading partners and residents stop listening to polished slogans and start watching whether airports function, services hold up, information arrives, and business can keep moving. That was the useful core of Saeed Al Eter’s remarks at Ajman Media Forum 2026: soft...

Continue Reading
Fluence Investors Face a November 27 Litigation Clock

Updated Category News Views 347

Six calendar squares are all that separate eligible Fluence investors from the November 27, 2026 lead-plaintiff deadline. That is not much time to locate trade confirmations, calculate losses, and decide whether taking a larger role in a securities case makes sense. The lawsuit is not a verdict, and anybody pretending otherwise is selling smoke. But the underlying...

Continue Reading
UAE Ties Diplomacy, Media and AI Into a Shared Signal

Updated Category News Views 128

Influence is getting harder to measure, and easier to squander, which is why the message from Ajman deserves more than a polite nod. At the 2026 Ajman Media Forum, THE SIGNAL, Foreign Affairs Undersecretary Omar Obaid Alhesan Alshamsi made the UAE’s position plain: diplomacy and media are no longer separate lanes. Both operate on words, context, trust and the difficult...

Continue Reading
3TREES Tests a Bigger Asia-Pacific Growth Blueprint

Updated Category News Views 386

A bucket of paint rarely sounds strategic until it sits inside a regional supply chain. That is the useful part of 3TREES chairman and president Hong Jie's message from the Asia-Pacific Economic Cooperation CEO Summit in Shenzhen on November 17-18, 2026: coatings are not merely a commodity if the supplier can bring materials, energy savings, technical know-how and...

Continue Reading

Top 5 Most Recently Viewed Articles

Hippo's Q3 2024 Results Showcase Growth and Financial Strength

Updated Category News Views 343

Hippo's Remarkable Financial Performance in Q3 2024 Hippo (NYSE: HIPO), a leader in home insurance dedicated to proactive protection, has unveiled its financial highlights for the third quarter of 2024. This announcement celebrates a continuation of their success, driven by strategic initiatives aimed at achieving profitable growth. Strong Revenue Growth Hippo reported...

Continue Reading
Alloy Personal Training's New Partnership Sets Growth Strategy

Updated Category News Views 225

Alloy Personal Training Partners with CapitalSpring for Expansion Alloy Personal Training recently announced an innovative collaboration with a reputable investment firm to boost its franchise growth and reach across the nation. This strategic partnership marks a notable chapter in the company’s history, reinforcing its commitment to a people-centric business model...

Continue Reading
Intel's Strategic Path Forward: Long-Term Growth in Focus

Updated Category News Views 918

Intel's Long-Term Commitment to Foundry Services Intel Corp (NASDAQ: INTC) has recently shared its strategic vision with employees, highlighting a gradual approach to growth instead of seeking quick profits. Analysts report that while there may not be any revolutionary announcements on the horizon, Intel's plans and intentions are coming into clearer focus. Analyst Harlan...

Continue Reading
Game-Changing PR: Good At Marketing's Exclusive Software

Updated Category News Views 41

Earned Media: The Overlooked Goldmine South Florida's advertising scene is a bit like a crowded beach with everyone scrambling for the same spot of sand. But Good At Marketing, based in Boynton Beach, is wading in deeper waters. They've cracked the code to something their competition hasn't even considered: earned media. Not your basic ad buy, this agency says earned...

Continue Reading
Zevra Therapeutics Reveals Impressive 2024 Financial Results

Updated Category News Views 236

Zevra Therapeutics Reports Strong Financial Results for 2024 In a significant step forward, Zevra Therapeutics, Inc. (NASDAQ: ZVRA) has released its financial results for the full year of 2024, reporting impressive net revenues of $23.6 million. This figure includes remarkable fourth-quarter contributions, with net revenue reaching $12.0 million. Company's Strategic Moves...

Continue Reading