HLM Announces $450,000 Financing
Filing Services Canada XHTML - Wed Jul 08, 7:01AM CDT
HLM.VN: 0.160 (-0.030)
HLM Drills In-Fill on the PAK Lithium Project Intersecting 2.01% Li2O Over 66 Metres
Filing Services Canada - Wed Jun 24, 10:01AM CDT
HLM Drills In-Fill on the PAK Lithium Project Intersecting 2.01% Li2O Over 66 Metres Highlights: Diamond Drill Hole (DDH) PL-020-15 intersected 2.02% Li2O over 66.05metre (m) from 79.50m to 145.55m; DDH PL-020-15 includes a 5.85m wide lithium zone (Upper Intermediate Zone or UIZ) averaging 4.15% Li2O from 80.05m to 85.90m; and Mineralization remains open to depth and along strike to the northwest and southeast. Sudbury, Ontario (FSCwire) - Houston Lake Mining Inc. (TSX.V: HLM) To view this table, please either click on the link below, or copy and paste the link into your browser: To view this table, please either click on the link below, or copy and paste the link into your browser: To view this table, please either click on the link below, or copy and paste the link into your browser: To view this table, please either click on the link below, or copy and paste the link into your browser: (1) The intervals in Table I are drill intersection widths. There is currently insufficient data to determine the true thickness of the pegmatite. (2) Li20 content in the CIZ is predominantly associated with lithian micas and to a lesser extent (if any) in spodumene. Li2O content in the Li enriched zones is predominantly associated with spodumene. n/a = Not applicable The Upper Intermediate (UIZ), Central Intermediate (CIZ), Lower Intermediate Zones (LIZ) and Wall Zone (WZ) were previously described in the July 2, 2013 Press Release. Zones of sodic aplite are present in all holes and vary in width from tens of centimetres to several metres, and contain significant concentrations of Ta, Rb and Cs. Noteworthy observations are that the NNE (footwall) boundary with the metasediments is consistent and predictable while the SSW (hanging wall) contact with the granite is somewhat erratic and complicated by granitic blocks and rafts, and appears to have been variably affected (metasomatized) by the pegmatite intrusion event(s). The mineralized pegmatite remains open along strike to the WNW and ESE, and at depth. Granitic blocks/rafts mapped on surface appear to diminish with depth. The scissor pair of DDH 15 and DDH-20 show that the granite observed at surface and cut in the top of DDH-15 does not persist at depth where the deeper portion of DDH-20 cut pegmatite. We are pleased with these infill results from the Phase III diamond drill program as all of the holes consolidate the Inferred and Indicated Resource Estimate announced January 28, 2015[1] (#_ftn1), commented Trevor R. Walker, President of HLM. The mineralized pegmatite intersections totalling 98.65m in DDH PL-020-15 will positively expand the current mineral resource estimates tonnage. Table II Collar Locations for Diamond Drill Hole (DDH) To view this table, please either click on the link below, or copy and paste the link into your browser: Due Diligence All scientific and technical information in this release has been reviewed and approved by Peter J. Vanstone, P.Geo., the qualified person (QP) under the definitions established by National Instrument 43-101. Under HLMs QA/QC procedures, the diamond drill contract specified NQ-sized drill core providing a 47.6 mm diameter sample. The drill holes were oriented perpendicular to the strike of the pegmatite and drilled continuously across it. Sample security and chain of custody started with the removal of core from the core tube and boxing of drill core at the drill site. The boxed core remained under the custody of the drill contractor until it was transported from the drill to the secure on-site Core Shack facility by either the drill contractor or one of the Companys designated personnel. At the on-site Core Shack, core boxes were opened and inspected to ensure correct boxing and labelling of the core by the drill contractor, photographed and then re-closed. The core was stored securely until moved into the Core Shack for processing. The company geologists logged the core, and then marked and tagged it for sampling and splitting. Each core sample was assigned a tag with a unique identifying number. Sample lengths are typically one meter, but can be less depending on zone mineralogy and boundaries. The Core was then re-closed and shipped to the companys off-site core splitting facility in Sudbury, Ontario. Core marked for splitting was cut using a diamond core saw with a mounted jig to assure the core was cut lengthwise into equal halves. Half of the core was sent to an analytical laboratory for quantitative analysis of select elements. The remaining half of the core is retained and incorporated into HLMs secure, off-site core library. All samples were assayed by Activation Laboratories Ltd. (Actlabs), an ISO accredited laboratory in Ancaster, Ontario. Sample blanks along with tantalum, lithium, rubidium and cesium certified reference material was routinely inserted into the sample stream in accordance with industry recommended practices. Field duplicate samples were also taken in accordance with industry recommended practices. About the PAK Lithium Project The PAK Lithium Project lies close to the boundary between two geological sub-provinces of the western Superior geologic province in northwestern Ontario and hosts a rare metals pegmatite deposit. The deposit is an LCT (lithium- cesium- tantalum) type pegmatite. These types of pegmatites have been the principal source of hard rock lithium, tantalum, rubidium and cesium ores mined in the world but there are comparatively few commercially-viable deposits. HLM is actively exploring its 100% owned and optioned project which contains the Pakeagama Lake pegmatite. The deposit is one of the highest grade lithium deposits in North America which has a current Indicated Resource of 2.45 million tonnes of 1.81% Li2O Eq. and Inferred Resource of 5.91 million tonnes of 2.01% Li2O Eq. which has a technical/ceramic grade spodumene with low inherent iron (below 0.1% Fe2O3)[2] (#_ftn2). The deposit has adjacent zones that are enriched in rubidium and tantalum. HLM is also evaluating the phased co-production of rubidium and tantalum concentrates once lithium mineral production has been commercialized. The deposit has a known 400m strike length with an estimated true width varying from 10m to 125m with a sub-vertical orientation. The resource remains open to depth and along strike to the northwest and southeast. The Phase III, 1,500m diamond drill program was conducted with the objective to upgrade the lithium Indicated mineral resource to a Measured category, and to possibly upgrade the Inferred mineral resource to a Measured and Indicated category. About Houston Lake Mining Inc. HLMs goal is to become a fully integrated lithium, rubidium and tantalum producer through the development of the PAK Rare Metals Project in Ontario, Canada . The Company's strategy is to take advantage of the global shift towards electric/hybrid vehicles and high quality consumer electronics by becoming a raw material supplier of the elements required for the pursuit of sustainable energy and other applications in high-tech electronics and metal alloys. Combined, HLMs Board of Directors and Management have over 300 years of finance, exploration and mining experience to facilitate the Companys goal. HLM has a total of 104,791,629 common shares issued and outstanding. For additional information, please visit the company website at www.houstonlakemining.com (http://www.houstonlakemining.com). Company Contact Information Trevor R. Walker, President Henry J. Kloepper, CEO 2736 Belisle Drive T. +001 416.520.0187 Val Caron, ON. P3N 1B3 CANADA T. +001 705.897.7622 F. +001 705.897.7618 Forward-looking Statements Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This release includes certain statements that may be deemed forward-looking statements. All statements in this release, other than statements of historical facts, that address future production, reserve potential, exploration drilling, exploitation activities and events or developments that the Company expects are forward-looking statements. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and those actual results or developments may differ materially from those projected in the forward-looking statements. For more information on the Company, Investors should review the Companys registered filings what are available at www.sedar.com (http://www.sedar.com). [1] (#_ftnref1) See HLM Press Release January 28, 2015 titled HLM Announces an Upgraded NI 43-101 Resource Estimate for the PAK Rare Metals Project in Ontario, Canada. [2] (#_ftnref2) See HLM Press Release January 28, 2015 titled HLM Announces an Upgraded NI 43-101 Resource Estimate for the PAK Rare Metals Project in Ontario, Canada. To view this press release as a PDF file, click onto the following link: http://www.fscwire.com/sites/default/files/ne...242015.pdf Source: Houston Lake Mining Inc. (TSX Venture:HLM) http://www.houstonlakemining.com/ Maximum News Dissemination by FSCwire. http://www.fscwire.com Copyright(C)2015 Filing Services Canada Inc.
HLM.VN: 0.160 (-0.030)
HLM Announces Exercise of Warrants for Proceeds of $390,000
Filing Services Canada XHTML - Wed Jun 10, 9:47AM CDT
HLM.VN: 0.160 (-0.030)
HLM Announces $275,000 Shares for Debt Financing
Filing Services Canada XHTML - Fri May 01, 2:17PM CDT
HLM.VN: 0.160 (-0.030)
HLM Announces Exercise of Warrants for Proceeds of $641,763
Filing Services Canada XHTML - Tue Apr 07, 9:50AM CDT
HLM.VN: 0.160 (-0.030)
HLM Advances Toward Proof of Concept with Bulk Sampling Program on the PAK Lithium Project
Filing Services Canada - Mon Mar 23, 8:57AM CDT
HLM Advances Toward Proof of Concept with Bulk Sampling Program on the PAK Lithium Project Sudbury, Ontario (FSCwire) - HLM has commenced the next phase of determining the potential for commercializing the PAK deposit by bulk sampling the lithium zone of the pegmatite. The preparation of the 300t (approx.) bulk sample will be completed by the end of March 2015. The objectives are to evaluate production of spodumene-bearing product as a precursor to potential commercial scale spodumene concentrate production, to test the suitability of the product for direct use as a replacement for lithium mineral concentrates, test blasting parameters and mining logistics with existing haulage infrastructure[1] (#_ftn1). The scope of a future Pre-feasibility Study will be shaped by the results of this phase of testing. The results of the 2013 and 2014 exploration programs on the PAK Lithium Projects property, point to the deposit having the potential to be developed as a commercial supplier of technical grade lithium minerals. HLM is pursuing this potential with the aim of taking the PAK Lithium Project to market during the coming 3-5 years. The characteristics of the high grade spodumene-bearing product comprising the Upper Intermediate Zone (UIZ) indicate there is potential for near term extraction of product from the zone that is suitable for use in traditional technical applications for spodumene concentrates (such as production of ceramics, frit, glass and glass ceramic). Production of this crushed and ground product without up-grading by flotation or gravity separation (Direct Shipping Ore DSO) could provide HLM with a source of useful revenue at low capital cost during the preparation of the Pre-feasibility and Feasibility Studies for the construction of a concentrator facility. The key needs of the technical lithium users are low iron to lithia analysis ratio to avoid colouration of glass and glazes, consistent product analysis and particle size, and competitive cost. The lithium zone from which the bulk sample was extracted appears to have the pertinent mineralogical and chemical characteristics so it will be pilot-tested to validate the data that support these observations. The sample has been collected by surface trenching of an area in the UIZ where there is discontinuous, limited overburden ( Trevor R. Walker President +001 (705) 897-7622 Henry Kloepper CEO +001 (416) 520-0187 To view this press release as a PDF file, click onto the following link: http://www.fscwire.com/sites/default/files/ne...232015.pdf Source: Houston Lake Mining Inc. (TSX Venture:HLM) http://www.houstonlakemining.com/ Maximum News Dissemination by FSCwire. http://www.fscwire.com Copyright(C)2015 Filing Services Canada Inc.
HLM.VN: 0.160 (-0.030)
HLM Announces an Upgraded NI 43-101 Resource Estimate for the PAK Rare Metals Project in Ontario, Canada
Filing Services Canada XHTML - Wed Jan 28, 8:32AM CST
WSP.TO: 40.41 (+0.70), HLM.VN: 0.160 (-0.030)
HLM Raises $359,155 in Flow-Through Financing Oversubscribed by 74%
Filing Services Canada XHTML - Fri Jan 09, 9:25AM CST
HLM.VN: 0.160 (-0.030)
HLM Announces $200,000 Flow-Through Financing
Filing Services Canada XHTML - Fri Dec 19, 2:21PM CST
HLM.VN: 0.160 (-0.030)
HLM Identifies Further High Grade Lithium at Surface Through New Channel Sampling up to 4.46 Li2O over 8 Meters on the PAK Rare Metals Project
Filing Services Canada XHTML - Tue Dec 16, 8:32AM CST
HLM.VN: 0.160 (-0.030)
HLM Commences Resource Estimate update for the PAK Rare Metals Project in Ontario, Canada
Filing Services Canada XHTML - Mon Dec 08, 8:31AM CST
WSP.TO: 40.41 (+0.70), HLM.VN: 0.160 (-0.030)
HLM Drills the Pak Inferred Resource Intersecting 2.01% Lithium Oxide Over 60 Metres and Increases the Strike Length by 50%
Filing Services Canada XHTML - Mon Nov 17, 11:41AM CST
HLM.VN: 0.160 (-0.030)
HLM Drills Beneath the PAK Inferred Resource Intersecting 1.16% Lithium Oxide Over 202 Metres in Ontario, Canada
Filing Services Canada XHTML - Wed Sep 24, 10:20AM CDT
HLM.VN: 0.160 (-0.030)