Gkn Plc Spons ADR (GKNLY) 5.3200 $GKNLY
Automotive Axle & Propeller Shaft Market by Position, Axle Type, Propeller Shaft Type, Material, & by Region - Forecast and Analysis to 2019
M2 - Tue Mar 24, 7:17AM CDT
Research and Markets (http://www.researchandmarkets.com/research/8r6fxx/automotive_axle) has announced the addition of the "Automotive Axle & Propeller Shaft Market by Position, Axle Type, Propeller Shaft Type, Material, & by Region- Forecast and Analysis to 2019" report to their offering. The global automotive axle & propeller market size in terms of value is estimated to be $35.8 billion in 2014, which is projected to grow to $53.3 billion by 2019 at a CAGR of 8.25%. The growing demand of automobiles for daily commuting has resulted in a direct increase in demand for axles. Axles form an integral component for load bearing, steering, and driving the vehicle. Axles can be live or dead, based on the application and drivetrain of the vehicle. The functioning of the axles depends on the position of the axle in the vehicle. Heavy Commercial Vehicles (HCV) may integrate more than two axles depending on the application and role of the vehicle. Propeller shaft helps transfer the power from the engine to the wheels and plays a vital role in the drivetrain of the vehicle. The vehicle's architecture and powertrain dictates the position of the propeller shaft. Most automobiles use steel alloy for propeller shafts and axles. However, following increasing stringency of fuel-efficiency regulations, suppliers are focusing on implementing lightweight materials in their products; without sacrificing strength. The use of aluminum and carbon fiber has been limited in these components due to higher cost. With increasing demand for fuel-efficiency, lightweight materials are expected to witness increasing adoption in the automotive industry. The Asia-Oceania and North American regions are growing at a good pace, given the increasing automotive production in these regions. Growing purchasing power, low penetration of automobiles, and infrastructure development in emerging nations such as China, Brazil, and India has resulted in an increase in demand for personal transportation and commercial vehicles. Asia-Oceania is estimated to be the largest market for axles and propeller shafts and is projected to grow at the highest rate from 2014-2019. Global axle & propeller market is dominated by few top players such as ZF Friedrichshafen AG (Germany), American Axle & Manufacturing, Inc. (U.S.), Meritor, Inc. (U.S.), Showa Corporation (Germany), and GKN plc (U.K.) along with regional suppliers. Key Topics Covered: 1.Introduction 2.Research Methodology 3.Executive Summary 4.Premium Insights 5.Market Overview 6.Automotive Axle Market, By Type 7. Automotive Axle Market, By Position 8. Automotive Propeller Shaft Market, By Position 9. Passenger Car Propeller Shaft Market, By Material 10.Automotive Axle & Propeller Shaft Market, By Region 11. Competitive Landscape 12.Company Profiles - American Axle & Manufacturing, Inc. - Dana Limited - GKN Plc - Gestamp - Hyundai Wia Corporation - IFA Rotorion - Jtekt Corporation - Meritor, Inc. - Showa Corporation - ZF Friedrichshafen Ag For more information visit http://www.researchandmarkets.com/research/8r...otive_axle
MTOR: 12.42 (-0.12)
Concentric AB: Concentric completes acquisition of GKN Sinter Metals de Argentina SA
Business Wire - Mon Feb 02, 1:11AM CST
Regulatory News:
Global Automotive Powertrain Market Industry Trends & Forecast to 2019: Key Vendors are Aisin Seiki, ZF Friedrichshafen, GKN, BorgWarner, American Axle and Manufacturing and JTEKT
M2 - Tue Jan 06, 3:50AM CST
Research and Markets (http://www.researchandmarkets.com/research/fzl5dk/automotive) has announced the addition of the "Automotive Powertrain Market by Position, Vehicle Type, Engine Type & Geography - Industry Trends & Forecast to 2019" report to their offering. The powertrain is a system of motorized parts of a vehicle that produces energy, which is further transformed so as to drive the vehicle. It generally consists of engine, transmission, driveshaft, axles, differential, and clutch/torque converter. The powertrain of any vehicle creates energy initially in the engine, and this energy is transferred to the transmission. The transmission takes the power from the engine and with certain gear ratios, reduces it and the engine's torque is transmitted through the driveshaft to the wheels of the vehicle, which, when applied to road, moves the vehicle. This report covers the global automotive powertrain market. The global automotive powertrain market report is broadly segmented by geography (Asia-Oceania, Europe, North America & RoW) focusing on key countries in each region. The market is further segmented by position [Front-wheel drive (FWD), rear-wheel drive (RWD), and all-wheel drive (AWD)], by vehicle type (Passenger car, light commercial vehicle, and heavy commercial vehicle), and by engine type (Gasoline and Diesel). This report classifies and defines the global automotive powertrain market. It also provides qualitative insights about the types and components of powertrain. The report also gives a wide-ranging review of the market drivers, restraints, opportunities, challenges, and key issues in the global automotive powertrain market and describes the estimated changes that will be brought about in the market in the near future. Scope of the Report Position - FWD - RWD - AWD Vehicle Type - Passenger Car - LCV - HCV Engine Type - Gasoline - Diesel Companies Mentioned - Aisin Seiki Co., Ltd. - Borgwarner Inc. - Ford Motor Company - GKN PLC - General Motors Company - Hyundai Motor Company - JTEKT Corp. - Toyota Motor Corp. - Volkswagen AG - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/fzl5dk/automotive
F: 16.03 (+0.08), GM: 36.57 (+0.28), TM: 139.65 (-0.26)
Global Automotive Powertrain Market 2014-2019 - Position, Vehicle Type, Engine Type & Geography Analysis
M2 - Fri Nov 07, 4:25AM CST
Research and Markets (http://www.researchandmarkets.com/research/rvhzsx/automotive) has announced the addition of the "Automotive Powertrain Market by Position, Vehicle Type, Engine Type & Geography - Industry Trends & Forecast to 2019" report to their offering. The global automotive powertrain market is estimated to grow at a significant rate as the need for fuel-efficient and high performance automobiles is increasing. The need for high-tech powertrains has greatly increased in order to meet the stringent emission norms. The growing trend of downsizing engines and the rising demand for automated transmission are some of the key factors driving the automotive powertrain market globally. The Asia-Oceania region is estimated to be the largest powertrain market in terms of value by 2019. The vital aspect contributing to the growth of the powertrain market in this region is the increasing number of vehicles being produced as well as the increasing penetration of passenger cars in the developing countries. The markets in North America and Europe are estimated to hold the second and third position, respectively. The introduction of stringent emission norms in European and North American countries have given rise to the increased demand for advanced powertrains which are lighter in weight and help in increasing fuel efficiency, reducing emissions, and improving the performance of vehicles. With respect to vehicle type, the passenger cars segment is expected to hold the maximum share, followed by light commercial vehicles and heavy commercial vehicles. Currently, in the passenger cars segment, the front-wheel drive (FWD) type is estimated to dominate the market; whereas rear-wheel drive (RWD) is widely being adopted in light commercial vehicles and heavy commercial vehicles. In the coming years, the all-wheel drive (AWD) system is anticipated to replace the FWD and RWD systems owing to the growing demand for comfort and safety; and the increasing need for better acceleration, traction, and towing capacity in vehicles. Scope of the Report Position - FWD - RWD - AWD Vehicle Type - Passenger Car - LCV - HCV Engine Type - Gasoline - Diesel Geography - Asia-Oceania - Europe - North America - ROW Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Automotive Engine Market, By Type 7 Automotive Powertrain Market, By Vehicle Type 8 Automotive Powertrain Market, By Region 9 Automotive Powertrain Market, By Position/Drive Type 10 Competitive Landscape 11 Company Profiles - Aisin Seiki Co., Ltd. - Borgwarner Inc. - Ford Motor Company - GKN PLC - General Motors Company - Hyundai Motor Company - JTEKT Corp. - Toyota Motor Corp. - Volkswagen AG - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/rvhzsx/automotive
F: 16.03 (+0.08), GM: 36.57 (+0.28), TM: 139.65 (-0.26)
Global Automotive Multi-Wheel Drive Systems Market Trends and Forecasts, 2019 - Vehicle Type, System Type & Geography Analysis of the $6 Billion Market
M2 - Fri Nov 07, 3:23AM CST
Research and Markets (http://www.researchandmarkets.com/research/m6xv2p/automotive) has announced the addition of the "Automotive Multi-Wheel Drive Systems Market by Vehicle Type, by System Type & by Geography - Global Trends and Forecast to 2019" report to their offering. The global automotive multi-wheel drive systems market is projected to become worth $6,247.5 Million by 2019, at a CAGR of 9.64% At present, AWD systems are classified into automatic and manual systems. Manual AWD systems require human intervention for initiation of the process whereas automatic systems have intelligent control over the process. In earlier days, these systems were available only in high-end premium segment cars and their advantages unknown to the majority of the consumers around the world. The introduction of AWD systems in small passenger cars and other vehicles has increased the demand globally. Additionally, increasing demand for SUVs globally, increased safety awareness; affordability, fuel efficiency, stability, and control are factors which are currently driving the demand of multi-wheel drive systems. This report classifies and defines the automatic and manual AWD systems market in terms of volume and value. This report provides comprehensive analysis and insights on the multi-wheel drive systems (both qualitative and quantitative). The report highlights potential growth opportunities in the coming years as well as it covers review of market drivers, restraints, growth indicators, challenges, legislation trends, market dynamics, competitive landscape, and other key aspects with respect to multi-wheel drive systems. Scope of the Report Vehicle Type - Passenger Car - LCV - HCV System Type - Automatic AWD - Manual AWD Systems Geography - Asia-Oceania - North America - Europe - ROW Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Technology Overview 7 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive System Market, By Geography Type 8 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By Vehicle Type 9 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By System Type 10 Competitive Landscape 11 Company Profiles - American Axle Manufacturing - Borg Warner Inc. - Continental AG - Dana Holding Corporation - Eaton Corporation PLC - GKN PLC - Jtekt Corporation - Magna International Inc. - Oerlikon Inc. - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/m6xv2p/automotive
ETN: 68.69 (+0.14), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Global 4WD and AWD Light Vehicle Market Report 2014 - Forecasts to 2029
M2 - Mon Nov 03, 6:10AM CST
Research and Markets (http://www.researchandmarkets.com/research/vpk8p4/global_4wd_and) has announced the addition of the "Global 4WD and AWD light vehicle market- forecasts to 2029" report to their offering. This report edition offers a global review of the OE 4WD and AWD sector, its suppliers, top markets, technologies and market forecasts. This global market study offers: - Automotive OE 4WD and AWD market size estimates - Latest technologies and trends - Market share data tables - Exclusive interviews with major companies - Profiles of the major players including their strategies and prospects - Market size forecasts Key Topics Covered: 1. Introduction 2. PESTER analysis - American Axle & Manufacturing, Inc - BorgWarner Inc. - Dana Holding Corporation - GKN Plc - JTEKT Corporation - Magna International Inc. - ZF Friedrichshafen AG 3. Technologies - Alfa Romeo Q4 - Audi quattro - BMW xDrive - Bentley Continental GT Speed and GTC Speed - Fiat Panda 4x4 - Ford - wide use of Torque on Demand - Honda - Jeep - Kia - Land Rover - Lexus - Mazda Active Torque-Split - Mercedes-Benz 4Matic - Mitsubishi - Nissan - Porsche - Porsche Traction Management - PSA's novel approach - Subaru E-4AT - Suzuki SX4 - Toyota - Volkswagen 4. Markets - North America - Western and Central Europe 5. Forecasts For more information visit http://www.researchandmarkets.com/research/vp...al_4wd_and
BWA: 61.31 (-0.40), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Metal Matrix Composites Market - Global Strategic Business Report 2014-2020
M2 - Thu Oct 30, 5:12AM CDT
Research and Markets (http://www.researchandmarkets.com/research/sr3ll8/metal_matrix) has announced the addition of the "Metal Matrix Composites - Global Strategic Business Report" report to their offering. The report provides separate comprehensive analytics for the US, Canada, Japan, Europe, Asia-Pacific, Latin America, and Rest of World. Annual estimates and forecasts are provided for the period 2013 through 2020. Also, a seven-year historic analysis is provided for these markets. Market data and analytics are derived from primary and secondary research. Company profiles are primarily based on public domain information including company URLs. This report analyzes the worldwide markets for Metal Matrix Composites in US$ Million and Thousand Pounds by the following Product Segments: - Aluminum Matrix Composites - Nickel Matrix Composites - Refractory Metal Matrix Composites - Other Metal Matrix Composites The report profiles 41 companies including many key and niche players such as: - 3A Composites International AG - 3M Company - Ceradyne, Inc. - ADMA Products, Inc. - Ametek Specialty Metal Products - CPS Technologies Corporation - Daewha Alloytic Co. Ltd. - Deutsche Edelstahlwerke GmbH - DWA Aluminum Composites - GKN PLC - Hitachi Metals, Ltd. - Materion Corporation - Metal Matrix Cast Composites LLC - MI-Tech Metals, Inc. - PLANSEE Thermal Management Solutions - Sandvik AB - Sumitomo Electric Industries, Ltd. - Thermal Transfer Composites LLC - TISICS Ltd. Key Topics Covered: I. Introduction, Methodology & Product Definitions II. Executive Summary 1. Industry Overview 2. Noteworthy Trends, Growth Drivers & Issues 3. Product Overview 4. Recent Industry Activity 5. Focus On Select Global Players 6. Global Market Perspective III. Market 1. United States 2. Canada 3. Japan 4. Europe 5. Asia-Pacific 6. Latin America 7. Rest Of World IV. Competitive Landscape Total Companies Profiled: 41 (including Divisions/Subsidiaries - 43) - The United States (25) - Canada (3) - Japan (3) - Europe (11) - - France (1) - - Germany (1) - - The United Kingdom (6) - - Rest of Europe (3) A - Asia-Pacific (Excluding Japan) (1) For more information visit http://www.researchandmarkets.com/research/sr...tal_matrix
MMM: 167.07 (+0.28), AME: 53.52 (+0.12), MTRN: 39.65 (+1.01)
Powder Metallurgy (Ferrous, Non-ferrous and Others) Market 2020 - Automotive, Electrical and Electronics, Industrial and Other Applications Analysis of the $8 Billion Industry
M2 - Tue Oct 21, 6:10AM CDT
Research and Markets (http://www.researchandmarkets.com/research/nqrsf8/powder_metallurgy) has announced the addition of the "Powder Metallurgy Market (Ferrous, Non-ferrous and Others) for Automotive, Electrical and Electronics, Industrial and Other Applications - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2014 - 2020" report to their offering. The global powder metallurgy market was valued at USD 6.06 billion in 2013 and is expected to reach USD 8.7 billion by 2020, growing at a CAGR of 5.4% from 2014 to 2020. Ferrous powder accounted for the largest share of the powder metallurgy market in terms of volume with over 70% share in 2013. Non-ferrous powder was the second-largest product segment of the powder metallurgy market, followed by others (metal matrix composites, cemented carbides, etc.), in 2013. The powder metallurgy industry exhibits a low to medium degree of backward integration as few producers of powder metallurgy products are engaged in upstream activities. This backward integration provides market players with a distinct competitive advantage in terms of better customer retention and market dominance. Demand for powder metallurgy is primarily led by growth in the automobile industry and increasing cost effectiveness of powder metallurgy technology globally. Rise in demand for automobiles, especially in Asia Pacific, has boosted demand for powder metallurgy products in the region. Growth in industrial activities pertaining to heavy industries and aerospace sectors is also anticipated to be one of the key drivers for the powder metallurgy market in the region. Recovering automobile sector in developed economies is another important factor driving the global powder metallurgy market. The automotive industry in countries such as the U.S. has been witnessing growth of late. This has further increased demand for powder metallurgy, especially for automotive applications, in the region. Key Topics Covered: Chapter 1 Preface Chapter 2 Executive Summary Chapter 3 Powder Metallurgy - Industry Analysis Chapter 4 Powder Metallurgy Market - Product Segment Analysis Chapter 5 Powder Metallurgy Market - Application Analysis Chapter 6 Powder Metallurgy Market - Regional Analysis Chapter 7 Company Profiles - Allegheny Technologies Incorporated - Carpenter Technology Corporation - Federal-Mogul Corporation - Fine Sinter Co., Ltd. - GKN plc. - H.C. Starck - Hitachi Chemical Company, Ltd. - Hoganas AB - SMC Powder Metallurgy Inc. - Sandvik AB - Sumitomo Electric Industries, Ltd. - Voestalpine AG For more information visit http://www.researchandmarkets.com/research/nq...metallurgy
CRS: 40.65 (+0.42), ATI: 30.17 (+0.04)
Automotive Multi-Wheel Drive Systems Market to 2019 - Market is Dominated by ZF Friedrichshafen AG, Continental AG, Borg Warner Inc & GKN Driveline
M2 - Wed Sep 03, 11:16AM CDT
Research and Markets (http://www.researchandmarkets.com/research/qd8hlq/automotive) has announced the addition of the "Automotive Multi-Wheel Drive Systems Market by Vehicle Type, by System Type & by Geography - Global Trends and Forecast to 2019" report to their offering. The global automotive multi-wheel drive systems market is projected to become worth $6,247.5 Million by 2019, at a CAGR of 9.64%. The Automatic and Manual automotive multi-wheel drive systems market is projected to grow at a CAGR of 8.79% in terms of value, from 2014 to 2019. Presently, the automotive industry is inclined towards using advanced technologies to reduce crashes and mitigate the impact of accidents on passengers. The multi-wheel drive systems play an important role in achieving both the targets. Multi-wheel drive systems have evolved from the need for better fuel efficiency, safety, stability, control, and driving experience. These systems provide the vehicle with the aforesaid features, prompting the automobile companies to invest extensively in these systems. The market for these systems is driven by the increasing demand for the SUVs globally as well as due to the unfavorable terrain conditions prevailing in the various regions. In Europe and North America, the automatic and manual automotive multi-wheel drive systems are well-established and have a higher penetration rate. Use of these systems is also growing significantly in the Asia-Oceania and RoW regions owing to an increase in the consumer purchasing power and their preference for better safety measures. China, U.S, Germany, and U.K. are expected to be the largest markets for the multi-wheel drive systems. Developing countries such as India, Brazil, and Mexico are expected to show a higher growth rate in the demand for automatic and manual automotive multi-wheel drive systems from 2014-2019. The global automotive multi-wheel drive systems market is dominated by players such as ZF Friedrichshafen AG (Germany), Continental AG (Germany), Borg Warner Inc (U.S.), and GKN Driveline (England). Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Technology Overview 7 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive System Market, By Geography Type 8 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By Vehicle Type 9 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By System Type 10 Competitive Landscape 11 Company Profiles - American Axle Manufacturing - Borg Warner Inc. - Continental AG - Dana Holding Corporation - Eaton Corporation PLC - GKN PLC - Jtekt Corporation - Magna International Inc. - Oerlikon Inc. - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/qd8hlq/automotive
ETN: 68.69 (+0.14), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Metal Matrix Composites (MMC) Market to 2019: Ground Transportation, Electronics/Thermal Management, Aerospace and Others
M2 - Thu Aug 28, 5:41AM CDT
Research and Markets (http://www.researchandmarkets.com/research/r6djvc/metal_matrix) has announced the addition of the "Metal Matrix Composites (MMC) Market for Ground Transportation, Electronics/Thermal Management, Aerospace and Other End-users - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019" report to their offering. The global MMC market generated revenue of USD 228.7 million in 2012 and is expected to reach USD 357.3 million by 2019, expanding at a CAGR of 6.6% from 2013 to 2019. The refractory MMC segment accounted for the largest share of the global MMC market in 2012, followed by aluminum MMC and nickel MMC. The refractory MMC segment of the global MMC market generated revenue of USD 92.8 million in 2012 and is anticipated to reach USD 147.3 million in 2019, growing at a CAGR of 6.8% from 2013 to 2019. It is also the fastest growing product segment in the MMC market. Furthermore, the aluminum segment is anticipated to record decent growth over the next six years led by rising demand for aluminum MMC from automotive and aerospace industries. The ground transportation segment was the largest end-user segment of MMC in 2012. The ground transportation segment generated revenue of USD 119.6 million in 2012 and is projected to reach USD 184.2 million in 2019, growing at a CAGR of 6.4% from 2013 to 2019. The ground transportation segment was followed by electronics/thermal management industry, which is likely to be the fastest growing end-user segment in the global MMC market. Ground transportation and electronics/thermal management segments are anticipated to grow significantly in the next few years due to high demand from automotive and electronics industries globally. Additionally, demand for MMC from other end-users, including nuclear industry and industrial equipment manufacturers, is expected to increase at a decent rate in the next six years. Report Scope Product Segment Analysis - Aluminum MMC - Nickel MMC - Refractory MMC - Others (Including magnesium MMC, beryllium MMC, titanium MMC, etc.) End-user Analysis - Ground Transportation - Electronics/Thermal Management - Aerospace - Others (Including defense, industrial equipment, marine, nuclear, etc.) Key players profiled in the report include: - Materion Corporation - Sandvik AB - GKN PLC - 3M - Plansee SE - Sumitomo Electric Industries, Ltd. - Hitachi Metals, Ltd. - CPS Technologies Corporation - Deutsche Edelstahlwerke GmbH - 3A Composites For more information visit http://www.researchandmarkets.com/research/r6...tal_matrix
MTRN: 39.65 (+1.01)
GKN and The Go-Ahead Group using F1 technology to improve fuel efficiency of London buses
M2 - Mon Aug 04, 6:43AM CDT
GKN plc and The Go-Ahead Group have agreed a deal that will help reduce emissions in cities with the supply of electric flywheel systems to 500 buses over the next two years.
Completion of Emitec sale
M2 - Mon Aug 04, 6:43AM CDT
Further to its announcement on 30 April 2014, GKN plc confirms the completion of the sale of its 50% shareholding in the emissions reduction technology business Emitec Gesellschaft fur Emissionstechnologie mbH to Continental AG following the receipt of regulatory approvals.
Global 4WD and AWD Light Vehicle Market - Forecasts to 2029
M2 - Tue Jul 15, 5:20AM CDT
Research and Markets (http://www.researchandmarkets.com/research/hrkzhs/global_4wd_and) has announced the addition of the "Global 4WD and AWD light vehicle market- forecasts to 2029" report to their offering. This latest just-auto report edition offers a global review of the OE 4WD and AWD sector, its suppliers, top markets, technologies and market forecasts. This global market study offers: - Automotive OE 4WD and AWD market size estimates - Latest technologies and trends - Market share data tables - Exclusive interviews with major companies - Profiles of the major players including their strategies and prospects - Market size forecasts Key Topics Covered: 1. Introduction 2. PESTER analysis 3. Companies - American Axle & Manufacturing, Inc - BorgWarner Inc. - Dana Holding Corporation - GKN Plc - JTEKT Corporation - Magna International Inc. - ZF Friedrichshafen AG 4. Technologies - Alfa Romeo Q4 - Audi quattro - BMW xDrive - Bentley Continental GT Speed and GTC Speed - Fiat Panda 4x4 - Ford - wide use of Torque on Demand - Honda - Jeep - Kia - Land Rover - Lexus - Mazda Active Torque-Split - Mercedes-Benz 4Matic - Mitsubishi - Nissan - Volkswagen - Electric Motor Assisted 4WD - Hybrids winning friends 5. Markets 6. Forecasts For more information visit http://www.researchandmarkets.com/research/hr...al_4wd_and
BWA: 61.31 (-0.40), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Automotive Axle & Propeller Shaft Market by Position, Axle Type, Propeller Shaft Type, Material, & by Region - Forecast and Analysis to 2019
M2 - Tue Mar 24, 7:17AM CDT
Research and Markets (http://www.researchandmarkets.com/research/8r6fxx/automotive_axle) has announced the addition of the "Automotive Axle & Propeller Shaft Market by Position, Axle Type, Propeller Shaft Type, Material, & by Region- Forecast and Analysis to 2019" report to their offering. The global automotive axle & propeller market size in terms of value is estimated to be $35.8 billion in 2014, which is projected to grow to $53.3 billion by 2019 at a CAGR of 8.25%. The growing demand of automobiles for daily commuting has resulted in a direct increase in demand for axles. Axles form an integral component for load bearing, steering, and driving the vehicle. Axles can be live or dead, based on the application and drivetrain of the vehicle. The functioning of the axles depends on the position of the axle in the vehicle. Heavy Commercial Vehicles (HCV) may integrate more than two axles depending on the application and role of the vehicle. Propeller shaft helps transfer the power from the engine to the wheels and plays a vital role in the drivetrain of the vehicle. The vehicle's architecture and powertrain dictates the position of the propeller shaft. Most automobiles use steel alloy for propeller shafts and axles. However, following increasing stringency of fuel-efficiency regulations, suppliers are focusing on implementing lightweight materials in their products; without sacrificing strength. The use of aluminum and carbon fiber has been limited in these components due to higher cost. With increasing demand for fuel-efficiency, lightweight materials are expected to witness increasing adoption in the automotive industry. The Asia-Oceania and North American regions are growing at a good pace, given the increasing automotive production in these regions. Growing purchasing power, low penetration of automobiles, and infrastructure development in emerging nations such as China, Brazil, and India has resulted in an increase in demand for personal transportation and commercial vehicles. Asia-Oceania is estimated to be the largest market for axles and propeller shafts and is projected to grow at the highest rate from 2014-2019. Global axle & propeller market is dominated by few top players such as ZF Friedrichshafen AG (Germany), American Axle & Manufacturing, Inc. (U.S.), Meritor, Inc. (U.S.), Showa Corporation (Germany), and GKN plc (U.K.) along with regional suppliers. Key Topics Covered: 1.Introduction 2.Research Methodology 3.Executive Summary 4.Premium Insights 5.Market Overview 6.Automotive Axle Market, By Type 7. Automotive Axle Market, By Position 8. Automotive Propeller Shaft Market, By Position 9. Passenger Car Propeller Shaft Market, By Material 10.Automotive Axle & Propeller Shaft Market, By Region 11. Competitive Landscape 12.Company Profiles - American Axle & Manufacturing, Inc. - Dana Limited - GKN Plc - Gestamp - Hyundai Wia Corporation - IFA Rotorion - Jtekt Corporation - Meritor, Inc. - Showa Corporation - ZF Friedrichshafen Ag For more information visit http://www.researchandmarkets.com/research/8r...otive_axle
MTOR: 12.42 (-0.12)
Concentric AB: Concentric completes acquisition of GKN Sinter Metals de Argentina SA
Business Wire - Mon Feb 02, 1:11AM CST
Regulatory News:
Global Automotive Powertrain Market Industry Trends & Forecast to 2019: Key Vendors are Aisin Seiki, ZF Friedrichshafen, GKN, BorgWarner, American Axle and Manufacturing and JTEKT
M2 - Tue Jan 06, 3:50AM CST
Research and Markets (http://www.researchandmarkets.com/research/fzl5dk/automotive) has announced the addition of the "Automotive Powertrain Market by Position, Vehicle Type, Engine Type & Geography - Industry Trends & Forecast to 2019" report to their offering. The powertrain is a system of motorized parts of a vehicle that produces energy, which is further transformed so as to drive the vehicle. It generally consists of engine, transmission, driveshaft, axles, differential, and clutch/torque converter. The powertrain of any vehicle creates energy initially in the engine, and this energy is transferred to the transmission. The transmission takes the power from the engine and with certain gear ratios, reduces it and the engine's torque is transmitted through the driveshaft to the wheels of the vehicle, which, when applied to road, moves the vehicle. This report covers the global automotive powertrain market. The global automotive powertrain market report is broadly segmented by geography (Asia-Oceania, Europe, North America & RoW) focusing on key countries in each region. The market is further segmented by position [Front-wheel drive (FWD), rear-wheel drive (RWD), and all-wheel drive (AWD)], by vehicle type (Passenger car, light commercial vehicle, and heavy commercial vehicle), and by engine type (Gasoline and Diesel). This report classifies and defines the global automotive powertrain market. It also provides qualitative insights about the types and components of powertrain. The report also gives a wide-ranging review of the market drivers, restraints, opportunities, challenges, and key issues in the global automotive powertrain market and describes the estimated changes that will be brought about in the market in the near future. Scope of the Report Position - FWD - RWD - AWD Vehicle Type - Passenger Car - LCV - HCV Engine Type - Gasoline - Diesel Companies Mentioned - Aisin Seiki Co., Ltd. - Borgwarner Inc. - Ford Motor Company - GKN PLC - General Motors Company - Hyundai Motor Company - JTEKT Corp. - Toyota Motor Corp. - Volkswagen AG - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/fzl5dk/automotive
F: 16.03 (+0.08), GM: 36.57 (+0.28), TM: 139.65 (-0.26)
Global Automotive Powertrain Market 2014-2019 - Position, Vehicle Type, Engine Type & Geography Analysis
M2 - Fri Nov 07, 4:25AM CST
Research and Markets (http://www.researchandmarkets.com/research/rvhzsx/automotive) has announced the addition of the "Automotive Powertrain Market by Position, Vehicle Type, Engine Type & Geography - Industry Trends & Forecast to 2019" report to their offering. The global automotive powertrain market is estimated to grow at a significant rate as the need for fuel-efficient and high performance automobiles is increasing. The need for high-tech powertrains has greatly increased in order to meet the stringent emission norms. The growing trend of downsizing engines and the rising demand for automated transmission are some of the key factors driving the automotive powertrain market globally. The Asia-Oceania region is estimated to be the largest powertrain market in terms of value by 2019. The vital aspect contributing to the growth of the powertrain market in this region is the increasing number of vehicles being produced as well as the increasing penetration of passenger cars in the developing countries. The markets in North America and Europe are estimated to hold the second and third position, respectively. The introduction of stringent emission norms in European and North American countries have given rise to the increased demand for advanced powertrains which are lighter in weight and help in increasing fuel efficiency, reducing emissions, and improving the performance of vehicles. With respect to vehicle type, the passenger cars segment is expected to hold the maximum share, followed by light commercial vehicles and heavy commercial vehicles. Currently, in the passenger cars segment, the front-wheel drive (FWD) type is estimated to dominate the market; whereas rear-wheel drive (RWD) is widely being adopted in light commercial vehicles and heavy commercial vehicles. In the coming years, the all-wheel drive (AWD) system is anticipated to replace the FWD and RWD systems owing to the growing demand for comfort and safety; and the increasing need for better acceleration, traction, and towing capacity in vehicles. Scope of the Report Position - FWD - RWD - AWD Vehicle Type - Passenger Car - LCV - HCV Engine Type - Gasoline - Diesel Geography - Asia-Oceania - Europe - North America - ROW Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Automotive Engine Market, By Type 7 Automotive Powertrain Market, By Vehicle Type 8 Automotive Powertrain Market, By Region 9 Automotive Powertrain Market, By Position/Drive Type 10 Competitive Landscape 11 Company Profiles - Aisin Seiki Co., Ltd. - Borgwarner Inc. - Ford Motor Company - GKN PLC - General Motors Company - Hyundai Motor Company - JTEKT Corp. - Toyota Motor Corp. - Volkswagen AG - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/rvhzsx/automotive
F: 16.03 (+0.08), GM: 36.57 (+0.28), TM: 139.65 (-0.26)
Global Automotive Multi-Wheel Drive Systems Market Trends and Forecasts, 2019 - Vehicle Type, System Type & Geography Analysis of the $6 Billion Market
M2 - Fri Nov 07, 3:23AM CST
Research and Markets (http://www.researchandmarkets.com/research/m6xv2p/automotive) has announced the addition of the "Automotive Multi-Wheel Drive Systems Market by Vehicle Type, by System Type & by Geography - Global Trends and Forecast to 2019" report to their offering. The global automotive multi-wheel drive systems market is projected to become worth $6,247.5 Million by 2019, at a CAGR of 9.64% At present, AWD systems are classified into automatic and manual systems. Manual AWD systems require human intervention for initiation of the process whereas automatic systems have intelligent control over the process. In earlier days, these systems were available only in high-end premium segment cars and their advantages unknown to the majority of the consumers around the world. The introduction of AWD systems in small passenger cars and other vehicles has increased the demand globally. Additionally, increasing demand for SUVs globally, increased safety awareness; affordability, fuel efficiency, stability, and control are factors which are currently driving the demand of multi-wheel drive systems. This report classifies and defines the automatic and manual AWD systems market in terms of volume and value. This report provides comprehensive analysis and insights on the multi-wheel drive systems (both qualitative and quantitative). The report highlights potential growth opportunities in the coming years as well as it covers review of market drivers, restraints, growth indicators, challenges, legislation trends, market dynamics, competitive landscape, and other key aspects with respect to multi-wheel drive systems. Scope of the Report Vehicle Type - Passenger Car - LCV - HCV System Type - Automatic AWD - Manual AWD Systems Geography - Asia-Oceania - North America - Europe - ROW Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Technology Overview 7 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive System Market, By Geography Type 8 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By Vehicle Type 9 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By System Type 10 Competitive Landscape 11 Company Profiles - American Axle Manufacturing - Borg Warner Inc. - Continental AG - Dana Holding Corporation - Eaton Corporation PLC - GKN PLC - Jtekt Corporation - Magna International Inc. - Oerlikon Inc. - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/m6xv2p/automotive
ETN: 68.69 (+0.14), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Global 4WD and AWD Light Vehicle Market Report 2014 - Forecasts to 2029
M2 - Mon Nov 03, 6:10AM CST
Research and Markets (http://www.researchandmarkets.com/research/vpk8p4/global_4wd_and) has announced the addition of the "Global 4WD and AWD light vehicle market- forecasts to 2029" report to their offering. This report edition offers a global review of the OE 4WD and AWD sector, its suppliers, top markets, technologies and market forecasts. This global market study offers: - Automotive OE 4WD and AWD market size estimates - Latest technologies and trends - Market share data tables - Exclusive interviews with major companies - Profiles of the major players including their strategies and prospects - Market size forecasts Key Topics Covered: 1. Introduction 2. PESTER analysis - American Axle & Manufacturing, Inc - BorgWarner Inc. - Dana Holding Corporation - GKN Plc - JTEKT Corporation - Magna International Inc. - ZF Friedrichshafen AG 3. Technologies - Alfa Romeo Q4 - Audi quattro - BMW xDrive - Bentley Continental GT Speed and GTC Speed - Fiat Panda 4x4 - Ford - wide use of Torque on Demand - Honda - Jeep - Kia - Land Rover - Lexus - Mazda Active Torque-Split - Mercedes-Benz 4Matic - Mitsubishi - Nissan - Porsche - Porsche Traction Management - PSA's novel approach - Subaru E-4AT - Suzuki SX4 - Toyota - Volkswagen 4. Markets - North America - Western and Central Europe 5. Forecasts For more information visit http://www.researchandmarkets.com/research/vp...al_4wd_and
BWA: 61.31 (-0.40), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Metal Matrix Composites Market - Global Strategic Business Report 2014-2020
M2 - Thu Oct 30, 5:12AM CDT
Research and Markets (http://www.researchandmarkets.com/research/sr3ll8/metal_matrix) has announced the addition of the "Metal Matrix Composites - Global Strategic Business Report" report to their offering. The report provides separate comprehensive analytics for the US, Canada, Japan, Europe, Asia-Pacific, Latin America, and Rest of World. Annual estimates and forecasts are provided for the period 2013 through 2020. Also, a seven-year historic analysis is provided for these markets. Market data and analytics are derived from primary and secondary research. Company profiles are primarily based on public domain information including company URLs. This report analyzes the worldwide markets for Metal Matrix Composites in US$ Million and Thousand Pounds by the following Product Segments: - Aluminum Matrix Composites - Nickel Matrix Composites - Refractory Metal Matrix Composites - Other Metal Matrix Composites The report profiles 41 companies including many key and niche players such as: - 3A Composites International AG - 3M Company - Ceradyne, Inc. - ADMA Products, Inc. - Ametek Specialty Metal Products - CPS Technologies Corporation - Daewha Alloytic Co. Ltd. - Deutsche Edelstahlwerke GmbH - DWA Aluminum Composites - GKN PLC - Hitachi Metals, Ltd. - Materion Corporation - Metal Matrix Cast Composites LLC - MI-Tech Metals, Inc. - PLANSEE Thermal Management Solutions - Sandvik AB - Sumitomo Electric Industries, Ltd. - Thermal Transfer Composites LLC - TISICS Ltd. Key Topics Covered: I. Introduction, Methodology & Product Definitions II. Executive Summary 1. Industry Overview 2. Noteworthy Trends, Growth Drivers & Issues 3. Product Overview 4. Recent Industry Activity 5. Focus On Select Global Players 6. Global Market Perspective III. Market 1. United States 2. Canada 3. Japan 4. Europe 5. Asia-Pacific 6. Latin America 7. Rest Of World IV. Competitive Landscape Total Companies Profiled: 41 (including Divisions/Subsidiaries - 43) - The United States (25) - Canada (3) - Japan (3) - Europe (11) - - France (1) - - Germany (1) - - The United Kingdom (6) - - Rest of Europe (3) A - Asia-Pacific (Excluding Japan) (1) For more information visit http://www.researchandmarkets.com/research/sr...tal_matrix
MMM: 167.07 (+0.28), AME: 53.52 (+0.12), MTRN: 39.65 (+1.01)
Powder Metallurgy (Ferrous, Non-ferrous and Others) Market 2020 - Automotive, Electrical and Electronics, Industrial and Other Applications Analysis of the $8 Billion Industry
M2 - Tue Oct 21, 6:10AM CDT
Research and Markets (http://www.researchandmarkets.com/research/nqrsf8/powder_metallurgy) has announced the addition of the "Powder Metallurgy Market (Ferrous, Non-ferrous and Others) for Automotive, Electrical and Electronics, Industrial and Other Applications - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2014 - 2020" report to their offering. The global powder metallurgy market was valued at USD 6.06 billion in 2013 and is expected to reach USD 8.7 billion by 2020, growing at a CAGR of 5.4% from 2014 to 2020. Ferrous powder accounted for the largest share of the powder metallurgy market in terms of volume with over 70% share in 2013. Non-ferrous powder was the second-largest product segment of the powder metallurgy market, followed by others (metal matrix composites, cemented carbides, etc.), in 2013. The powder metallurgy industry exhibits a low to medium degree of backward integration as few producers of powder metallurgy products are engaged in upstream activities. This backward integration provides market players with a distinct competitive advantage in terms of better customer retention and market dominance. Demand for powder metallurgy is primarily led by growth in the automobile industry and increasing cost effectiveness of powder metallurgy technology globally. Rise in demand for automobiles, especially in Asia Pacific, has boosted demand for powder metallurgy products in the region. Growth in industrial activities pertaining to heavy industries and aerospace sectors is also anticipated to be one of the key drivers for the powder metallurgy market in the region. Recovering automobile sector in developed economies is another important factor driving the global powder metallurgy market. The automotive industry in countries such as the U.S. has been witnessing growth of late. This has further increased demand for powder metallurgy, especially for automotive applications, in the region. Key Topics Covered: Chapter 1 Preface Chapter 2 Executive Summary Chapter 3 Powder Metallurgy - Industry Analysis Chapter 4 Powder Metallurgy Market - Product Segment Analysis Chapter 5 Powder Metallurgy Market - Application Analysis Chapter 6 Powder Metallurgy Market - Regional Analysis Chapter 7 Company Profiles - Allegheny Technologies Incorporated - Carpenter Technology Corporation - Federal-Mogul Corporation - Fine Sinter Co., Ltd. - GKN plc. - H.C. Starck - Hitachi Chemical Company, Ltd. - Hoganas AB - SMC Powder Metallurgy Inc. - Sandvik AB - Sumitomo Electric Industries, Ltd. - Voestalpine AG For more information visit http://www.researchandmarkets.com/research/nq...metallurgy
CRS: 40.65 (+0.42), ATI: 30.17 (+0.04)
Automotive Multi-Wheel Drive Systems Market to 2019 - Market is Dominated by ZF Friedrichshafen AG, Continental AG, Borg Warner Inc & GKN Driveline
M2 - Wed Sep 03, 11:16AM CDT
Research and Markets (http://www.researchandmarkets.com/research/qd8hlq/automotive) has announced the addition of the "Automotive Multi-Wheel Drive Systems Market by Vehicle Type, by System Type & by Geography - Global Trends and Forecast to 2019" report to their offering. The global automotive multi-wheel drive systems market is projected to become worth $6,247.5 Million by 2019, at a CAGR of 9.64%. The Automatic and Manual automotive multi-wheel drive systems market is projected to grow at a CAGR of 8.79% in terms of value, from 2014 to 2019. Presently, the automotive industry is inclined towards using advanced technologies to reduce crashes and mitigate the impact of accidents on passengers. The multi-wheel drive systems play an important role in achieving both the targets. Multi-wheel drive systems have evolved from the need for better fuel efficiency, safety, stability, control, and driving experience. These systems provide the vehicle with the aforesaid features, prompting the automobile companies to invest extensively in these systems. The market for these systems is driven by the increasing demand for the SUVs globally as well as due to the unfavorable terrain conditions prevailing in the various regions. In Europe and North America, the automatic and manual automotive multi-wheel drive systems are well-established and have a higher penetration rate. Use of these systems is also growing significantly in the Asia-Oceania and RoW regions owing to an increase in the consumer purchasing power and their preference for better safety measures. China, U.S, Germany, and U.K. are expected to be the largest markets for the multi-wheel drive systems. Developing countries such as India, Brazil, and Mexico are expected to show a higher growth rate in the demand for automatic and manual automotive multi-wheel drive systems from 2014-2019. The global automotive multi-wheel drive systems market is dominated by players such as ZF Friedrichshafen AG (Germany), Continental AG (Germany), Borg Warner Inc (U.S.), and GKN Driveline (England). Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary 4 Premium Insights 5 Market Overview 6 Technology Overview 7 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive System Market, By Geography Type 8 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By Vehicle Type 9 Global Automotive Automatic and Manual Automotive Multi-Wheel Drive Systems Market, By System Type 10 Competitive Landscape 11 Company Profiles - American Axle Manufacturing - Borg Warner Inc. - Continental AG - Dana Holding Corporation - Eaton Corporation PLC - GKN PLC - Jtekt Corporation - Magna International Inc. - Oerlikon Inc. - ZF Friedrichshafen AG For more information visit http://www.researchandmarkets.com/research/qd8hlq/automotive
ETN: 68.69 (+0.14), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
Metal Matrix Composites (MMC) Market to 2019: Ground Transportation, Electronics/Thermal Management, Aerospace and Others
M2 - Thu Aug 28, 5:41AM CDT
Research and Markets (http://www.researchandmarkets.com/research/r6djvc/metal_matrix) has announced the addition of the "Metal Matrix Composites (MMC) Market for Ground Transportation, Electronics/Thermal Management, Aerospace and Other End-users - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019" report to their offering. The global MMC market generated revenue of USD 228.7 million in 2012 and is expected to reach USD 357.3 million by 2019, expanding at a CAGR of 6.6% from 2013 to 2019. The refractory MMC segment accounted for the largest share of the global MMC market in 2012, followed by aluminum MMC and nickel MMC. The refractory MMC segment of the global MMC market generated revenue of USD 92.8 million in 2012 and is anticipated to reach USD 147.3 million in 2019, growing at a CAGR of 6.8% from 2013 to 2019. It is also the fastest growing product segment in the MMC market. Furthermore, the aluminum segment is anticipated to record decent growth over the next six years led by rising demand for aluminum MMC from automotive and aerospace industries. The ground transportation segment was the largest end-user segment of MMC in 2012. The ground transportation segment generated revenue of USD 119.6 million in 2012 and is projected to reach USD 184.2 million in 2019, growing at a CAGR of 6.4% from 2013 to 2019. The ground transportation segment was followed by electronics/thermal management industry, which is likely to be the fastest growing end-user segment in the global MMC market. Ground transportation and electronics/thermal management segments are anticipated to grow significantly in the next few years due to high demand from automotive and electronics industries globally. Additionally, demand for MMC from other end-users, including nuclear industry and industrial equipment manufacturers, is expected to increase at a decent rate in the next six years. Report Scope Product Segment Analysis - Aluminum MMC - Nickel MMC - Refractory MMC - Others (Including magnesium MMC, beryllium MMC, titanium MMC, etc.) End-user Analysis - Ground Transportation - Electronics/Thermal Management - Aerospace - Others (Including defense, industrial equipment, marine, nuclear, etc.) Key players profiled in the report include: - Materion Corporation - Sandvik AB - GKN PLC - 3M - Plansee SE - Sumitomo Electric Industries, Ltd. - Hitachi Metals, Ltd. - CPS Technologies Corporation - Deutsche Edelstahlwerke GmbH - 3A Composites For more information visit http://www.researchandmarkets.com/research/r6...tal_matrix
MTRN: 39.65 (+1.01)
GKN and The Go-Ahead Group using F1 technology to improve fuel efficiency of London buses
M2 - Mon Aug 04, 6:43AM CDT
GKN plc and The Go-Ahead Group have agreed a deal that will help reduce emissions in cities with the supply of electric flywheel systems to 500 buses over the next two years.
Completion of Emitec sale
M2 - Mon Aug 04, 6:43AM CDT
Further to its announcement on 30 April 2014, GKN plc confirms the completion of the sale of its 50% shareholding in the emissions reduction technology business Emitec Gesellschaft fur Emissionstechnologie mbH to Continental AG following the receipt of regulatory approvals.
Global 4WD and AWD Light Vehicle Market - Forecasts to 2029
M2 - Tue Jul 15, 5:20AM CDT
Research and Markets (http://www.researchandmarkets.com/research/hrkzhs/global_4wd_and) has announced the addition of the "Global 4WD and AWD light vehicle market- forecasts to 2029" report to their offering. This latest just-auto report edition offers a global review of the OE 4WD and AWD sector, its suppliers, top markets, technologies and market forecasts. This global market study offers: - Automotive OE 4WD and AWD market size estimates - Latest technologies and trends - Market share data tables - Exclusive interviews with major companies - Profiles of the major players including their strategies and prospects - Market size forecasts Key Topics Covered: 1. Introduction 2. PESTER analysis 3. Companies - American Axle & Manufacturing, Inc - BorgWarner Inc. - Dana Holding Corporation - GKN Plc - JTEKT Corporation - Magna International Inc. - ZF Friedrichshafen AG 4. Technologies - Alfa Romeo Q4 - Audi quattro - BMW xDrive - Bentley Continental GT Speed and GTC Speed - Fiat Panda 4x4 - Ford - wide use of Torque on Demand - Honda - Jeep - Kia - Land Rover - Lexus - Mazda Active Torque-Split - Mercedes-Benz 4Matic - Mitsubishi - Nissan - Volkswagen - Electric Motor Assisted 4WD - Hybrids winning friends 5. Markets 6. Forecasts For more information visit http://www.researchandmarkets.com/research/hr...al_4wd_and
BWA: 61.31 (-0.40), MGA: 54.31 (+0.11), DAN: 21.23 (-0.17)
