Accelerated development of CuSbS2 thin film photov
Post# of 22467
Posted On: 04/08/2015 8:11:38 PM
Accelerated development of CuSbS2 thin film photovoltaic device prototypes
Adam W. Welch, Lauryn L. Baranowski, Pawel Zawadzki, Clay DeHart, Steve Johnston, Stephan Lany, Colin A. Wolden, Andriy Zakutayev
(Submitted on 6 Apr 2015 (v1), last revised 7 Apr 2015 (this version, v2))
Development of alternative thin film photovoltaic technologies is an important research topic due to the potential for low-cost, large-scale fabrication of high-efficiency solar cells. Despite the large number of promising alternative absorbers and corresponding contacts, the rate of progress is limited by complications that arise during solar cell fabrication. One potential solution to this problem is the high-throughput combinatorial method, which has been extensively used for research and development of individual absorber and contact materials. Here, we demonstrate an accelerated approach to development of thin film photovoltaic device prototypes based on the novel CuSbS2 absorber, using the device architecture employed for CuInxGa(1-x)Se2 (CIGS). The newly developed three-stage, self-regulated CuSbS2 growth process enables the study of PV device performance trends as a function of phase purity, crystallographic orientation, layer thickness of the absorber, and numerous back contacts. This exploration results in initial CuSbS2 device prototypes with ~1% conversion efficiency; currently limited by low short-circuit current due to poor collection of photoexcited electrons, and a small open-circuit voltage due to a cliff-type conduction band offset at the CuSbS2/CdS interface (suggested by first-principles calculations). Overall, these results illustrate the potential of combinatorial methods to accelerate the development of thin film photovoltaic devices with novel absorbers.
http://arxiv.org/abs/1504.01345
Adam W. Welch, Lauryn L. Baranowski, Pawel Zawadzki, Clay DeHart, Steve Johnston, Stephan Lany, Colin A. Wolden, Andriy Zakutayev
(Submitted on 6 Apr 2015 (v1), last revised 7 Apr 2015 (this version, v2))
Development of alternative thin film photovoltaic technologies is an important research topic due to the potential for low-cost, large-scale fabrication of high-efficiency solar cells. Despite the large number of promising alternative absorbers and corresponding contacts, the rate of progress is limited by complications that arise during solar cell fabrication. One potential solution to this problem is the high-throughput combinatorial method, which has been extensively used for research and development of individual absorber and contact materials. Here, we demonstrate an accelerated approach to development of thin film photovoltaic device prototypes based on the novel CuSbS2 absorber, using the device architecture employed for CuInxGa(1-x)Se2 (CIGS). The newly developed three-stage, self-regulated CuSbS2 growth process enables the study of PV device performance trends as a function of phase purity, crystallographic orientation, layer thickness of the absorber, and numerous back contacts. This exploration results in initial CuSbS2 device prototypes with ~1% conversion efficiency; currently limited by low short-circuit current due to poor collection of photoexcited electrons, and a small open-circuit voltage due to a cliff-type conduction band offset at the CuSbS2/CdS interface (suggested by first-principles calculations). Overall, these results illustrate the potential of combinatorial methods to accelerate the development of thin film photovoltaic devices with novel absorbers.
http://arxiv.org/abs/1504.01345
(0)
(0)