SinterCast Results July-September 2014 Record

New Post Public Reply Private Reply Replies (0) Message Board
News Desk 2018
SinterCast Results July-September 2014

Record series production in September and third quarter Third Quarter 2014 * Revenue for Period: SEK 13.4 million (SEK 14.0 million) * Operating Result: SEK 3.1 million (SEK 2.3 million) * Earnings per Share: SEK 0.5 per share (SEK 0.3 per share) * Cashflow from Operations: SEK 2.6 million (SEK 1.3 million) * Record series production of 1.95 million Engine Equivalents in September * Record series production for third quarter with 10% year-on-year increase * New installation secured at Impro Industries in China for industrial power applications * Ford 2.7 litre petrol engine performance confirmed with 325 horsepower and 508 Nm of torque 2014 Year-to-Date * Revenue: SEK 38.9 million (SEK 37.5 million) * Operating Result: SEK 6.7 million (SEK 5.2 million) * Earnings per Share: SEK 1.2 per share (SEK 0.9 per share) * Cashflow from Operations: SEK 3.5 million (SEK 6.8 million) * Installed Base: 23 fully automated systems and 16 mini-systems in Europe, Asia and the Americas Series Production* For graph, please see PDF Annualised series production reached 1.80 million Engine Equivalents in the third quarter, providing a 10% year-on-year increase.  Series production in September established an all-time annualised record of 1.95 million Engine Equivalents. * Annualised average production of Engine Equivalents during the quarter (1 Engine Equivalent = 50 kg) CEO Comments Record series production in September and third quarter Series production in September approached the two million Engine Equivalent milestone with record annualised production of 1.95 million Engine Equivalents. The strong September production buoyed the traditionally lower summer shutdown months to provide record quarterly production of 1.80 million Engine Equivalents, resulting in three consecutive quarters of record series production and a 10% year-on-year increase.  The outlook remains positive in each of the passenger vehicle, commercial vehicle and industrial power sectors, as competitive benchmarks and market awareness continue to grow.  It is estimated that the current series production programmes have the potential to provide approximately 2.5 million Engine Equivalents at mature volume. Each of the top five series production programmes posted yearly high volume during September, as improving automotive sales and lower fuel prices contributed to increased passenger vehicle sales in Europe and increased pick-up sales in North America.  European commercial vehicle volumes also increased as the ramp up of new Euro 6 emissions vehicles continued during the quarter. Revenue for the third quarter is lower than revenue in the third quarter of 2013, but this is due to the record installation performance achieved in 2013. All other metrics, including series production, consumables, CGI product development intensity and the overall market acceptance of CGI have improved considerably and provide a positive outlook for future growth. North American pick-up applications continue to provide increased volumes and future growth potential.  Series production of the Ford 2.7 litre V6 petrol engine began to make a larger contribution to the total volume, as production increased in advance of the announced start of model year 2015 F150 pick-up sales in December.  In parallel, Ford has publicly confirmed that the 2.7 litre engine will provide 325 horsepower and 508 Nm of torque and journalist drive reports have been consistently positive about the performance, refinement and driveability of the engine.  Also during September, Ram introduced changes in its Michigan truck plant that enable an increase in capacity and an increase of the diesel build capability.  This development is in agreement with the planned increase of engine production presented by Mr Raffaele De Vivo, President of VM Motori North America, at SinterCast's 2014 AGM.  Ram has stated that approximately 60% of diesel sales have been conquest customers from rival truck brands.  This pressure, in the traditionally loyal pick-up sector, may motivate diesel responses from other OEMs. New installation for industrial power sector During the period, Impro Industries in China acquired a SinterCast licence in preparation for the start of series production of industrial power components. A Mini-System 3000 has been delivered and the installation is planned to be commissioned during the fourth quarter, with production starting thereafter. The SinterCast installation, together with engineering support, will enable Impro Industries, which specialises in heavy-duty and industrial power castings, to produce CGI components conforming to the international ISO 16112 standard for the export market.  The agreement marks SinterCast's eighth installation in China and fourteenth installation in Asia, broadening SinterCast's presence and brand awareness, and providing additional opportunities to increase SinterCast- CGI production in the industrial power sector. Ductile Iron technology Development of the ductile iron technology continued through the quarter with intensified training of new R&D personnel, foundry trials, data analysis and application programming.  Further field trials will be conducted during the fourth quarter at selected foundries in Europe and discussions are ongoing to establish reference case studies for prolonged trials during the first half of 2015.  The SinterCast ductile iron technology is expected to provide additional benefit to customers by reducing magnesium consumption, improving mould yield and reducing casting defects in the foundry, and by improving machinability. Financial Summary Revenue Revenue for the SinterCast Group relates primarily to income from equipment, series production and engineering service. Revenue Breakdown July - September January - September (Amounts in SEK million if not 2014 2013 2014 2013 otherwise stated) ------------------------------------------------------------------------------- Number of Sampling Cups 28,700 27,800 94,800 89,900 shipped Equipment (1) 1.1 3.2 3.8 5.9 Series Production (2) 11.9 10.5 33.9 30.2 Engineering Service( 3) 0.3 0.3 1.1 1.2 Other 0.0 0.0 0.1 0.2 ------------------------------------------------------------------------------- Total 13.4 14.0 38.9 37.5 ------------------------------------------------------------------------------- Notes: 1. Includes revenue from system sales and leases and sales of spare parts   2. Includes revenue from production fees, consumables and software licence fees   3. Includes revenue from technical support, on-site trials and sales of test pieces July-September 2014 revenue amounted to SEK 13.4 million (SEK 14.0 million). Revenue from series production increased by 13% to SEK 11.9 million (SEK 10.5 million), due to record annualised series production of approximately 1.80 million (1.60 million) annualised Engine Equivalents during the quarter and the increased shipment of 28,700 (27,800) Sampling Cups.  During the period, a Mini- System 3000 was shipped to Impro Industries foundry in China.  However, the total revenue for the quarter was lower due to the heightened installation activity during the third quarter of 2013.  Engineering Service amounted to SEK 0.3 million (SEK 0.3 million). January-September 2014 revenue amounted to SEK 38.9 million (SEK 37.5 million).  Revenue from series production increased by 12% to SEK 33.9 million (SEK 30.2 million) due to increased production and Sampling Cup shipments.  Equipment revenue amounted to SEK 3.8 million (SEK 5.9 million), following the shipment of a Mini-System 3000 to Impro Industries foundry in China and a System 3000 Plus to one of China's largest automotive component conglomerates.  Engineering Service amounted to SEK 1.1 million (SEK 1.2 million) following support provided to various customers globally and the sale of test pieces.  The revenue from the leased installations is accrued over the lease period. Results The business activities of SinterCast are best reflected by the Operating Result. This is because the "Result for the period after tax" and the "Earnings per Share" are influenced by the financial income and costs and by the revaluation of tax assets. Results Summary July - September January - September (Amounts in SEK million if not otherwise 2014 2013 2014 2013 stated) ------------------------------------------------------------------------------- Operating Result 3.1 2.3 6.7 5.2 Result for the period after tax 3.5 2.4 8.6 6.0 Earnings per Share (SEK)  0.5 0.3  1.2 0.9 ------------------------------------------------------------------------------- The July-September 2014 Operating Result of SEK 3.1 million (SEK 2.3 million) increased as a result of higher gross results of SEK 0.5 million, higher operational expenses of SEK 0.3 million and higher other operating income (exchange gains) of SEK 0.6 million. The Result for the period after tax amounted to SEK 3.5 million (SEK 2.4 million), primarily related to the increase in the Operating Result of SEK 0.8 million, the increased financial net of SEK 0.4 million and the decreased tax income of SEK 0.1 million. The January-September 2014 Operating Result of SEK 6.7 million (SEK 5.2 million) increased as a result of higher gross results of SEK 1.5 million primarily derived from higher revenue, combined with higher operational expenses of SEK 0.7 million and increased operating income (exchange gains) of SEK 0.7 million. The Result for the period after tax amounted to SEK 8.6 million (SEK 6.0 million), primarily related to the increased operating result of SEK 1.5 million, the increased financial net of SEK 0.9 million (primarily exchange gains), and increased tax income amounting to SEK 0.2 million, primarily due to the deferred tax adjustment. Deferred Tax Asset Tax amounted to SEK 0.9 million (SEK 0.7 million) during the January-September 2014 period, primarily explained by the SEK 1.0 million increase in the deferred tax asset during the second quarter (SEK 0.8 million during the first quarter 2013).  The estimated future taxable profit and deferred tax asset calculation is reassessed every quarter. As of 30 September 2014, SEK 133.3 million (SEK 128.5 million) of SinterCast's total carried-forward tax losses have been used as the basis of the updated calculation, resulting in SEK 29.3 million (SEK 28.3 million) being capitalised as a deferred tax asset. Cashflow, Liquidity and Investments Cashflow Summary July - September January - September (Amounts in SEK million if not otherwise 2014 2013 2014 2013 stated) ------------------------------------------------------------------------------- Cashflow from operations, before change 3.3 2.8 7.3 6.3 in working capital Change in working capital -0.7 -1.5 -3.8 0.5 ------------------------------------------------------------------------------- Cashflow from operations, after change in 2.6 1.3 3.5 6.8 working capital Cashflow from investing activities -0.5 -0.2 -0.8 -0.5 Cashflow from financing activities - - -8.5 -7.0 ------------------------------------------------------------------------------- Cashflow total 2.1 1.1 -5.8 -0.7 Liquidity 42.0 34.7 42.0 34.7 ------------------------------------------------------------------------------- July-September 2014 cashflow from operations, before changes in working capital, increased by 18% to SEK 3.3 million (SEK 2.8 million).  Cashflow from operations after changes in working capital amounted to SEK 2.6 (SEK 1.3 million), primarily related to, compared to the same period last year, higher cashflow from operations before changes in working capital (SEK 0.5 million), increased cashflow from receivables (SEK 0.3 million), increased cashflow from stock (SEK 0.1 million) and increased cashflow from operating liabilities (SEK 0.4 million). Following investments of SEK 0.5 million, primarily from new patents (SEK 0.2 million), the total cashflow result amounted to SEK 2.1 million (SEK 1.1 million). January-September 2014 cashflow from operations, before changes in working capital, increased by 16% to SEK 7.3 million (SEK 6.3 million). The increased cashflow is primarily due to higher operating results of SEK 1.5 million. Cashflow from operations after changes in working capital was SEK 3.5 million (SEK 6.8 million), primarily related to, compared to the same period last year, increased cashflow from operations before changes in working capital of SEK 1.0 million, decreased cashflow from receivables (SEK 0.4 million), decreased cashflow from stock (SEK 0.9 million) and decreased cashflow from operating liabilities (SEK 3.0 million). Following the dividend of SEK 8.5 million (SEK 7.0 million), the total cashflow result for the period was SEK -5.8 million (SEK -0.7 million), resulting in SEK 42.0 million (SEK 34.7 million) in liquidity on 30 September 2014. Investments, including new patents, amounted to SEK 0.8 million (SEK 0.6 million) during the period, of which SEK 0.8 million (SEK 0.5 million) resulted in cash outflow. Risks and Uncertainty Factors The main uncertainty factor for SinterCast continues to be the timing of the CGI market ramp-up. This primarily depends on OEM decisions for new CGI engines and other components, the global economy for new vehicle sales, and the individual sales success of vehicles equipped with SinterCast-CGI components. The global economy has developed differently in Europe, Asia and the Americas over the last few years. The Asian and European economies continue to be uncertain and this may impact passenger vehicle and commercial vehicle sales in these regions. However consumer confidence has recently increased in North America and SinterCast has benefitted from increased vehicle sales. SinterCast's geographical diversification helps to mitigate changing macroeconomic conditions in the different regions. SinterCast enjoys global brand recognition and respect as the CGI technology leader and is welcomed by the industry as a reliable and trustworthy partner. However, virtually every company encounters competition, and SinterCast is no exception.  SinterCast judges that its technology and engineering know-how provides the most reliable and cost-effective solution for series production of high quality CGI. New powertrain technologies, such as vehicle electrification (hybrid and plug-in vehicles) and fuel cells attract significant media attention; however, the development and implementation of these technologies remain a long-term prospect and SinterCast does not expect these technologies to have a significant effect on the Company's competitive position for the foreseeable future. For full risk and uncertainty factor information, please see note 26 on p.46 in SinterCast's Annual Report 2013 Organisation With successful high volume CGI production in foundries located in Europe, Asia and the Americas, SinterCast has established a global organisation with employees and offices in Sweden, the United Kingdom, the United States, China and Korea. A new Research Engineer joined the Company during the period.  As of 30 September 2014, the Group had 19 (17) employees, four (three) of whom are female. The Company is well positioned to support global market activities and to drive SinterCast's future growth. Parent Company SinterCast AB (publ) is the Parent Company of the SinterCast Group, with its registered office located in Stockholm, Sweden. The Parent Company has 14 (12) employees. The majority of the operations are managed by the Parent Company while local operations in the United Kingdom, United States, Korea and China are managed by the local companies.  The information given for the Group in this report corresponds in all material respects to the Parent Company. However, the result for the period may differ between the Group and the Parent Company due to intercompany transactions between the Parent Company and its subsidiaries. Accounting Principles The information provided on behalf of the Group in this interim report has been prepared in accordance with Sweden's Annual Accounts Act and IAS 34 Interim Financial Reporting. The reporting for the Parent Company has been prepared in accordance with Sweden's Annual Accounts Act and RFR 2. The accounting policies that have been applied for the Group and the Parent Company are in agreement with the accounting policies used in preparation of the Company's latest annual report. No material transactions have taken place between SinterCast and the Board or the Management during the period. Events after the Balance Sheet Date There have been no significant events since the balance sheet date of 30 September 2014 that could materially change these financial statements. Nomination Committee The Nomination Committee, elected by the Annual General Meeting 2014, consists of Karl-Arne Henriksson, Chairman, Andrea Fessler, Ulla-Britt Fräjdin-Hellqvist and Hans-Erik Andersson.  Shareholders wishing to provide input or proposals should provide written submissions to the Nomination Committee (e-mail: nomination.committee@sintercast.com) before 18 March 2015. Annual General Meeting The Annual General Meeting 2015 of SinterCast AB (publ) will be held on Wednesday 20 May 2015. Shareholders wishing to have a matter considered at the Annual General Meeting should provide written submissions to agm.registration@sintercast.com or to the Company: SinterCast AB (publ), P.O. Box 10203, SE-100 55 Stockholm, Sweden, at least seven weeks prior to the Annual General Meeting for the proposal to be included in the notice of the meeting. Further details on how and when to register will be published in advance of the Annual General Meeting. Information The Interim Report October-December 2014 and Full Year Results 2014 will be published on 11 February 2015 The Interim Report January-March 2015 will be published on 29 April 2015 The Interim Report April-June 2015 will be published on 29 July 2015 The Interim Report July-September 2015 will be published on 11 November 2015 Beginning with this report, all Interim Reports will be published at 08:00 CET This report has been reviewed by the Company's Auditors Stockholm 5 November 2014 For further information please contact: Dr. Steve Dawson President & CEO SinterCast AB (publ) Office: +46 8 660 7750 Mobile: +44 771 002 6342 e-mail: steve.dawson@sintercast.com website: www.sintercast.com Report of Review of Interim Financial Information Introduction We have reviewed the condensed interim financial information (interim report) of SinterCast AB (publ) as of 30th of September 2014 and the nine-month period then ended. The Board of Directors and the CEO are responsible for the preparation and presentation of the interim financial information in accordance with IAS 34 and the Swedish Annual Accounts Act. Our responsibility is to express a conclusion on this interim report based on our review. Scope of Review We conducted our review in accordance with the International Standard on Review Engagements ISRE 2410, Review of Interim Report Performed by the Independent Auditor of the Entity.  A review consists of making inquiries, primarily of persons responsible for financial and accounting matters, and applying analytical and other review procedures. A review is substantially less in scope than an audit conducted in accordance with International Standards on Auditing, ISA, and other generally accepted auditing standards in Sweden. The procedures performed in a review do not enable us to obtain assurance that we would become aware of all significant matters that might be identified in an audit. Accordingly, we do not express an audit opinion. Conclusion Based on our review, nothing has come to our attention that causes us to believe that the interim report is not prepared, in all material respects, in accordance with IAS 34 and the Swedish Annual Accounts Act, regarding the Group, and with the Swedish Annual Accounts Act, regarding the Parent Company. Stockholm, 5 November 2014 Öhrlings PricewaterhouseCoopers AB Tobias Stråhle Authorised Public Accountant SinterCast is the world's leading supplier of process control technology for the reliable high volume production of Compacted Graphite Iron (CGI). With at least 75% higher tensile strength, 45% higher stiffness and approximately double the fatigue strength of conventional grey cast iron and aluminium, CGI allows engine designers to improve performance, fuel economy and durability while reducing engine size, weight, noise and emissions. The SinterCast technology, with 39 installations in 12 countries, is primarily used for the production of petrol and diesel engine cylinder blocks and exhaust components for passenger vehicles, medium-duty and heavy-duty cylinder blocks and heads for commercial vehicles, and industrial power engine components for marine, rail, off-road and stationary engine applications. SinterCast's series production components range from 2 kg to 9 tonnes, all using the same proven process control technology.  The SinterCast share is quoted on the Small Cap segment of the Stockholm NASDAQ OMX stock exchange (Stockholmsbörsen: SINT). For more information: www.sintercast.com END [HUG#1868612]

Scroll down for more posts ▼

Top 10 Most Recent News Articles

Thanksgiving Dog Safety Is a Pet Care Reality Check

Updated Category News Views 0

A crowded Thanksgiving kitchen can turn a well-behaved dog into a scavenger with lousy odds. Camp Bow Wow’s holiday guidance is not pretending the meal itself is the problem; the trouble is that a house full of distracted people, rich food and unsecured trash creates a pile of easy mistakes. For pet owners, that is a fair reminder. For anybody watching the pet-care...

Continue Reading
Peptide Labels Cannot Substitute for Clinical Care

Updated Category News Views 9

A Label Is Not a Care Plan Those three little words, research use only, carry far more weight than a flashy product page would have people believe. The HelloNation article featuring wellness expert Andres Giraldo makes a plain but necessary distinction: a research-use-only, or RUO, label does not turn a peptide into prescribed treatment, and it sure does not establish...

Continue Reading
Washington-to-Asia Advisory Deal Targets Policy Risk

Updated Category News Views 0

Policy bottlenecks are becoming a cost center across Southeast Asia. That is the plain-English backdrop for the strategic partnership announced November 18, 2026, by Beacon Global Strategies and Vriens & Partners. Neither firm is selling a factory, a chip design, or a new energy project. They are selling something companies increasingly cannot afford to improvise: a...

Continue Reading
Spruce Spins Adrenyx En Route to Nasdaq in 2027

Updated Category News Views 206

New Frontiers: Adrenyx Biosciences Takes Shape Well, here's a new chapter in biotech drama. Spruce Biosciences, a name you might have tangled with if you're into tickers like NASDAQ:SPRB, just carved out a niche with the birth of Adrenyx Biosciences. The play? A separate company eyeing the endocrinology space, setting its sights on tackling congenital adrenal hyperplasia...

Continue Reading
Tactical Tomahawk Motor Deal Puts Propulsion in Focus

Updated Category News Views 31

A missile program lives or dies on unglamorous hardware, and solid rocket motors are about as unglamorous as it gets until somebody cannot build enough of them. Raytheon has awarded Ursa Major and Avio USA a joint contract to develop solid rocket motors for the U.S. Navy’s Tactical Tomahawk missile program. That is the whole headline, and it matters more than the thin...

Continue Reading
Insider Risk Makes Human Judgment a Security Priority

Updated Category News Views 127

A badge, a password, and a locked gate can all look reassuring right up until the person holding them starts to crack. Signpost Six's new report, The Psychology of Insider Risk, lands on an uncomfortable truth: the most consequential security weakness may not be a system at all. It may be an employee under strain, in conflict, in debt, making a mistake, or being quietly...

Continue Reading
Google Search Data Sharing Faces a Privacy Reality Check

Updated Category News Views 91

Search queries are messy little confessions, and that is exactly why this case deserves more than a bureaucratic shrug. Woodway Assurance's independent assessment says Google's search-query data could be treated as anonymized for sharing under the Digital Markets Act, but only if the European Commission tightens parts of its July 2026 framework. That is not a clean bill...

Continue Reading
Kawneer’s OptiQ Window Wins a Useful Design Signal

Updated Category News Views 49

Three Nods, One Very Practical Product Claim Windows rarely stir much excitement outside an architect’s specification binder, but Kawneer has put together a respectable run with its OptiQ Offset Fixed/Projected Series Window. On November 18, 2026, the architectural aluminum-systems maker said the product had won in the Windows and Doors category at both the 2026...

Continue Reading
A Decade of Giving: Light the World Initiative's Impact

Updated Category News Views 157

The Red Kiosk Revolution It's not every day that a church initiative pops up in global conversations, but here we are—ten years into the Light the World initiative by The Church of Jesus Christ of Latter-day Saints. What's interesting is how these little kiosks, like silent ambassadors, have become a staple in 145 spots this holiday season, spanning continents. Each...

Continue Reading
Anycubic Pushes Toward a Smoother 3D Printing Ecosystem

Updated Category News Views 46

Friction Is the Enemy in Consumer 3D Printing A printer that makes a beautiful object only after three failed attempts is not a consumer product; it is a weekend argument with plastic. That is the useful lens for Anycubic's Formnext 2026 showing in Frankfurt on November 18. The company is not merely rolling out FDM and resin machines at Booth F01 in Hall 12.0. It is...

Continue Reading

Top 5 Most Recently Viewed Articles

Bioretec's Innovative Annual Report Showcases New Progress

Updated Category News Views 188

Bioretec Ltd's Annual Report Overview Bioretec Ltd has recently published its annual report for 2024, offering insights into the company's growth and achievements over the past year. This report showcases the advancements made in biodegradable orthopedic implants, positioning the company at the forefront of innovative healthcare solutions. Company Highlights Bioretec...

Continue Reading
Market Overview: Asia Stocks See Fluctuations Amid Election Fears

Updated Category News Views 251

Market Dynamics in Asia: A Closer Look In recent trading sessions, Asian stocks demonstrated muted movements in response to an absence of compelling trading signals, while Japanese shares experienced a notable decline driven by impending democratic choices. Investors are particularly focused on the Japanese electoral scene, which is expected to significantly influence...

Continue Reading
TScan Therapeutics Secures $52.5 Million Loan to Support Growth

Updated Category News Views 113

TScan Therapeutics Secures $52.5 Million Loan from Silicon Valley Bank WALTHAM, Mass. — TScan Therapeutics, Inc. (Nasdaq: TCRX), a clinical-stage biotechnology company dedicated to developing innovative therapies for cancer treatment, has announced an exciting milestone. The company has entered into a term loan facility with Silicon Valley Bank (SVB) that offers up to...

Continue Reading
Celebrating Four Years of SpaceX's Starlink Internet Service

Updated Category News Views 385

Four Years of Starlink Connectivity Four years ago, SpaceX, under the visionary leadership of Elon Musk, began its journey in satellite internet services by activating Starlink for its first paying customer. This significant milestone was established on a date that marks the beginning of a transformative era for internet connectivity. Impact of Starlink on Global Internet...

Continue Reading
AllenComm Receives Esteemed Recognition in eLearning Field

Updated Category News Views 167

AllenComm Earns Top Honor for eLearning Localization AllenComm, a prominent player in the realm of innovative learning experiences, has recently been recognized as one of the Top Content Providers for eLearning Localization by a well-regarded industry source. This accolade reflects the company's dedication to delivering high-quality, effective educational solutions that...

Continue Reading