Avalon Reports Resource Estimate for East Kemptville

New Post Public Reply Private Reply Replies (0) Message Board
News Desk 2018
Avalon Reports Resource Estimate for East Kemptville Tin-Zinc-Copper-Indium Deposit, Nova Scotia, Canada

TORONTO, Oct. 31, 2014 (GLOBE NEWSWIRE) -- Avalon Rare Metals Inc. (TSX: AVL ) (NYSE MKT:AVL) ("Avalon" or the "Company") is pleased to report the results of its first National Instrument 43-101 ("NI 43-101") resource estimate for the East Kemptville tin-zinc-copper-indium deposit in Yarmouth County, Nova Scotia. The resource was prepared following a 7-hole confirmation drilling program completed at the site this summer to validate historical resource estimates and verify the estimates as current NI 43-101 mineral resource estimates.

The estimated Indicated Mineral Resources are 18.47 million tonnes averaging 0.176% tin, 0.173% zinc and 0.064% copper and the estimated Inferred Mineral Resources are 16.95 million tonnes averaging 0.148% tin, 0.122% zinc and 0.062% copper at a 0.10% tin cutoff grade, as more fully detailed in Table 1 below.

This resource estimate will be used to complete a Preliminary Economic Assessment ("PEA") to confirm the business case for proceeding with a comprehensive Feasibility Study to evaluate the potential for re-starting tin-zinc-copper and potentially indium production at East Kemptville. The PEA will be prepared by Hains Engineering Company Limited of Toronto ("Hains Engineering") and is targeted for completion by the end of this calendar year.

Note that the tonnages reported do not include any of the ore previously mined and processed or stockpiled on surface at East Kemptville, and are purely an estimation of the mineral resources that remained in the ground after mining activities at site ceased in 1992. The resources include material from both of the zones mined historically (the Main and Baby Zones) but do not include resources from any of the other undeveloped mineral occurrences known in the immediate area.

The mineral resource estimate was prepared by Hains Engineering with its principal, Donald Hains (P. Geo), serving as the independent Qualified Person ("QP") for the purpose of NI 43-101. The overall direction for the technical work program was provided by the Company's Vice-President, Exploration, William Mercer, Ph.D., P. Geo. (Nova Scotia). Drilling operations were performed by a Nova Scotia based drilling company under the field supervision of a consulting geologist based in Yarmouth, NS and an independent environmental consulting firm was retained to ensure safe work practice was adhered to at all times while drilling operations were active on the site. The program was successfully completed without incident.

2014 DRILLING PROGRAM

Seven drill holes totalling 984 metres were completed by the Company at East Kemptville between July and September, 2014. These holes were designed to "twin" or intersect the resource near a number of historic drill holes in order to validate historic analytical data. The drilling included holes in the Baby Zone and the southern end of the Main Zone.

Highlights include 0.41% Sn over 67.85 metres in hole EKAV-14-003 in the Baby Zone and 0.26% Sn over 80.3 metres in drill hole EKAV-14-006 in the Southwestern Extension of the Main Zone. A complete summary of drilling results is provided in Table 2 below.

Expenditures on the 2014 drilling program and other related work totalled approximately $575,000. This was mainly financed from the proceeds of the $2.166 million private placement financing completed by the Company on July 2, 2014. Additional funding of $40,000 was obtained from a grant secured from the Government of Nova Scotia under its 2014 Mineral Incentive Program.

Analyses were performed using modern Quality Assurance and Control ("QA/QC") procedures as described in the notes to Table 2. The results confirmed the validity of the historical data for inclusion in a NI 43-101 resource estimate as verified by independent QP, Donald Hains, P. Geo.

Note that indium analyses were not performed historically and therefore indium cannot presently be included as a potentially recoverable metal in the resource estimate. However indium content was determined in the recent drill core analyses and could contribute added value to the resource if it is ultimately proven to be a recoverable by-product.

PROJECT BACKGROUND

During its six years of operations from 1985-1992, East Kemptville was North America's only primary tin producer. It was closed due to a sudden collapse in tin prices after the international cartel, that controlled the global tin market up to that time, was disbanded. Tin prices were reported at the time to have fallen to between US$2.47 and US$2.60 per lb compared to close to $6.00/lb when operations commenced in 1985.

However, the tin market has been much stronger over the past 4 years with the London Metal Exchange Cash Buyer tin price averaging US$9.57 per lb for the month of September, 2014 (US$21,105 per tonne), creating an incentive to evaluate the potential for renewed tin mining at the site. The recent price strength reflects growing global tin demand due to its increased application in electronics, where it is used in solders as a non-toxic alternative to lead. China, Indonesia and Peru, the world's largest producers of tin, have reduced production of tin concentrates in recent years, increasing the demand for new primary supply sources such as East Kemptville.

Avalon holds mineral tenure for the East Kemptville resource under a Special Licence first granted to the Company in 2005. The recently completed drilling program was carried out under an access agreement entered into with surface rights holders earlier this year. Discussions toward obtaining full title to the lands that would ultimately be required for site re-development are in progress.

About Avalon Rare Metals Inc.

Avalon Rare Metals Inc. is a mineral development company focused on rare metal deposits in Canada, with three advanced stage projects. Its 100%-owned Nechalacho Deposit, Thor Lake, NWT is exceptional in its large size and enrichment in the scarce "heavy" rare earth elements, key to enabling advances in clean technology and other growing high-tech applications. Avalon is also advancing its Separation Rapids Lithium Minerals Project, Kenora, ON and its East Kemptville Tin-Indium Project, Yarmouth, NS. Social responsibility and environmental stewardship are corporate cornerstones.

For questions and feedback, please e-mail the Company at ir@avalonraremetals.com , or phone Don Bubar, President & CEO at 416-364-4938.

This news release contains "forward-looking statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities legislation. Forward-looking statements include, but are not limited to, statements related to the Company's anticipation that it will complete a NI 43-101 Preliminary Economic Assessment targeted for completion by the end of the calendar year; that, based on recent drill core analyses, indium could potentially contribute added value to the mineral resource if it is ultimately proven to be a recoverable by-product; the expectation of demand for new primary supply sources of tin such as the East Kemptville project; the expectation that current discussions in connection with obtaining full title to the mineral tenure and surface rights to the lands will be successful in order to allow for the re-development of East Kemptville. Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "potential", "scheduled", "anticipates", "continues", "expects" or "does not expect", "is expected", "scheduled", "targeted", "planned", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be" or "will not be" taken, reached or result, "will occur" or "be achieved". Forward-looking statements are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Avalon to be materially different from those expressed or implied by such forward-looking statements. Forward-looking statements are based on assumptions management believes to be reasonable at the time such statements are made. Although Avalon has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. Factors that may cause actual results to differ materially from expected results described in forward-looking statements include, but are not limited to market conditions, the ability of the Company to raise financing; and the possibility of cost overruns or unanticipated costs and expenses; the Company successfully completing a Preliminary Economic Assessment and ultimately a Feasibility study; indium not being proven to be a recoverable by-product; demand for new primary supply sources of tin diminishing; the Company not being successful in obtaining full title to the mineral tenure and surface rights to the lands to allow for re-development of East Kemptville; as well as those risk factors set out in the Company's current Annual Information Form, Management's Discussion and Analysis and other disclosure documents available under the Company's profile at www.SEDAR.com . There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Such forward-looking statements have been provided for the purpose of assisting investors in understanding the Company's plans and objectives and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking statements. Avalon does not undertake to update any forward-looking statements that are contained herein, except in accordance with applicable securities laws.

Table 1: Mineral Resources, East Kemptville Main and Baby Zones

 
Classification Sn Cut-off Grade Tonnes (mT) Sn % Zn % Cu %
  >= 0.05 46.07 0.104 0.132 0.051
  >= 0.10 18.47 0.176 0.173 0.064
IN SITU >= 0.15 6.83 0.239 0.204 0.077
INDICATED >= 0.20 3.16 0.337 0.268 0.093
  >= 0.25 2.93 0.344 0.275 0.092
 
  >= 0.05 34.29 0.102 0.104 0.052
  >= 0.10 16.95 0.148 0.122 0.062
IN SITU >= 0.15 2.66 0.203 0.130 0.075
INFERRED >= 0.20 0.82 0.311 0.138 0.120
  >= 0.25 0.58 0.342 0.171 0.117

Notes:

  1. CIM definitions were followed for Mineral Resources.
  2. The Independent Qualified Person for this Mineral Resource estimate is Donald Hains, P. Geo.
  3. The resource estimate is based on 275 drill holes totalling 29,587 metres drilled between 1979 and 1991 by previous operators and 7 holes totalling 984 metres drilled by the Company in 2014.
  4. Drill data was organised in Maxwell DataShed and for estimation purposes was transferred to MineSight 3D software, wherein the block model was developed.
  5. Resources were estimated by interpolating composites within a block model of 5x5x3 m blocks. Interpolation used the inverse distance squared method with localization of higher grades.
  6. Indicated material was defined as blocks with an average distance to interpolated composites of ≤ 50 m while inferred material was defined as blocks with an average distance to interpolated composites of ≤ 75 m, thus limiting the depth of the resource to 75 m below drill holes (see section 14.9 Resource Classification).
  7. Three metre composites were capped at 1% Sn, 1% Zn, and 0.5 Cu which are the 99 th percentiles of assay data for those elements, reducing contained tin by about 1% compared to uncapped resource.
  8. The median density of available data of 2.78 t/m 3 was used for all mineralized material.
  9. Several possible cut-off grades are reported in this resource estimate. Based on past mining practice at East Kemptville a cut-off grade of 0.1% Sn is reasonable. However, no value or cost estimates are available at this time.
  10. Mineral resources do not have demonstrated economic viability and their value may be materially affected by environmental, permitting, legal, title, socio-political, marketing, or other issues.

Table 2: Drilling Results, Summer 2014

                 
Zone Drill Hole  From (m)   To (m)  Width (m) Sn (%) Cu (%) Zn (%) In (ppm)
Main Zone EKAV-14-001 77.90 109.00 31.10 0.14 0.05 0.12 7.19
  including 77.90 98.50 20.60 0.18 0.07 0.11 7.18
Main Zone EKAV-14-006 29.70 110.00 80.30 0.26 0.11 0.23 14.92
  including 29.70 83.00 53.30 0.33 0.14 0.24 15.59
Main Zone EKAV-14-007 44.50 82.00 37.50 0.16 0.06 0.18 11.67
  including 55.00 64.00 9.00 0.42 0.08 0.30 15.03
Baby Zone EKAV-14-002 92.25 159.00 66.75 0.36 0.09 0.50 20.76
  including 92.25 133.50 41.25 0.47 0.12 0.39 21.00
Baby Zone EKAV-14-003 49.00 65.75 16.75 0.39 0.08 0.29 20.91
  and 80.25 148.10 67.85 0.41 0.05 0.53 16.77
Baby Zone EKAV-14-004 63.65 161.20 97.55 0.10 0.03 0.45 14.20
  and 80.50 94.00 13.50 0.17 0.05 0.52 16.26
  and 128.50 134.50 6.00 0.14 0.01 0.20 7.11
  and 147.00 161.20 14.20 0.17 0.06 1.15 30.19
Baby Zone EKAV-14-005 no significant intercepts, hole deviated from planned azimuth

Notes:

  1. Drilling utilized an HQ drill rig.
  2. All drill core from the program was split in half at 1 metre intervals at the core logging facility in Yarmouth, Nova Scotia and submitted to ALS Laboratory (Sudbury) for sample preparation and primary analysis.
  3. All drill core samples were assayed at ALS Global (Vancouver, BC), with every tenth sample submitted as a coarse split to both Actlabs (Ancaster, Ontario) and SGS Laboratory (Peterborough, Ontario) for check analyses. Actlabs and SGS pulverized and assayed the samples.
  4. Certified standards obtained from CANMET (Ottawa) and Analytical Solutions (Toronto) and were inserted in all laboratory shipments and monitored for QAQC issues. In addition, blanks were also inserted into primary shipments.
  5. All samples were assayed at ALS in Vancouver by ME-MS81 (lithium metaborate fusion followed by ICP), ME-ICP06 (whole rock analysis by lithium borate fusion and ICP) and ME-4ACD81 (4 acid digestion followed by ICP).
  6. All samples exceeding analytical limits for Sn, Cu, Zn or Pb in initial analysis were rerun by methods suited for higher grade analysis being ALS methods Sn-XRF10 for Sn and OG62 for the remaining base metals, which are element specific assay methods.
  7. Similar analytical methods were utilized at Actlabs and SGS.
  8. Results are monitored for key elements, and in cases of QA/QC issues, re-analysis is requested.
  9. The QAQC procedures and results have been audited by Avalon's independent QP for the project.
Scroll down for more posts ▼

Top 10 Most Recent News Articles

SteriLance Aims for Smoother Pricks with NanoSense Move

Updated Category News Views 92

Revamping the Lancing Game Out there in Suzhou, SteriLance Medical is steering clear of just chasing meter accuracy—do enough folks even care about glorified electronics?—they're zeroing in on the needle part of the blood glucose test, the part that pricks your finger every damn day. Yep, this new initiative is inviting blood glucose monitoring (BGM) brands to embrace...

Continue Reading
Ridgeline’s Dome Roof Award Signals Durable Craft Demand

Updated Category News Views 11

A faceted dome in the Alabama woods is about as far from a cookie-cutter reroof as it gets. Ridgeline Roofing & Restoration’s 2026 Excellence Award from Brava Roof Tile matters because the job in Pell City demanded the sort of painstaking field execution that separates a capable contractor from a crew merely moving shingles fast. Geometry Is Where Easy Claims Go to Die...

Continue Reading
Halff Elevates People and Delivery Leadership Team

Updated Category News Views 43

Infrastructure outfits rarely make much noise when they reshuffle leadership, but Halff’s Nov. 18 announcement deserves a closer look than the usual executive-title confetti. The employee-owned consulting firm has put Greg Carpenter in the chief people officer seat and named Leigh Hollis chief delivery officer. One role is aimed squarely at the human machinery; the...

Continue Reading
Fall Pest Risks Linger as Mild Weather Extends Threat

Updated Category News Views 16

A cold snap is not a magic off switch for mosquitoes, ticks, or rodents, and that is the sober point behind the National Pest Management Association's fall and winter 2026 Public Health Pest Index. The group is flagging conditions, not predicting that every household in a named city will face an infestation or illness. Still, mild temperatures, rain, flooding, and plenty...

Continue Reading
Alpha's Training Bet Reaches Into Aesthetic Care Networks

Updated Category News Views 234

Training is becoming part of the operating machine A certificate course is rarely the headline-grabber in healthcare services, yet this one deserves a closer look. Alpha Aesthetics Partners has launched Practice Aesthetics, a unified clinical education platform tied directly to its expanding network of medical aesthetics practices. This is not a public-market ticker...

Continue Reading
Polsen Flex Deal Puts Pre-Tax Funds Behind Wearables

Updated Category News Views 114

A pile of soon-to-expire FSA cash is a peculiar sales catalyst, but Polsen Health has found one. The Amsterdam-based preventative-health wearable company is partnering with Flex to let customers pay for every Polsen watch and strap using eligible HSA or FSA funds at checkout. No reimbursement chase, no claim forms, and buyers can split the cost with another card. For a...

Continue Reading
Microsoft-Intel Azure Pact Puts Systems Work First

Updated Category News Views 18

Azure’s next bottleneck may be the plumbing between chips, not the chips alone. Microsoft and Intel announced on Nov. 18, 2026, a long-term expansion of their already ancient partnership aimed at shaping select pieces of Azure infrastructure for cloud and AI demand. That sounds dry, because infrastructure announcements usually do. But this one deserves a closer look: it...

Continue Reading
A €18 Million Mecca Chandelier Tests Austrian Craft

Updated Category News Views 134

Scale Is Easy to Boast About, Delivery Is Not A 34.1-metre chandelier hanging in Mecca is the sort of job that makes ordinary project talk sound downright silly. Lights of Vienna says it designed, built, tested, shipped and installed this monster for the Grand Mosque's Shamiya area, with a contract value of roughly €18 million. That is a serious piece of work for a...

Continue Reading
Redseer's $5M Bet on Faster MENA Decision Intelligence

Updated Category News Views 65

Speed has become the expensive commodity in Middle Eastern commerce, and Redseer is putting roughly $5 million behind the idea that executives will pay to get it. Its newly launched Benchmarks MENA 2.0 platform combines proprietary market data with strategic advisory across nine MENA markets. That sounds like another corporate dashboard pitch until you consider the target...

Continue Reading
ELEGOO's Formnext Push Tests a Broader 3D Ambition

Updated Category News Views 180

Frankfurt’s show floor is where product promises meet some very unforgiving eyeballs. ELEGOO arrived at Formnext 2026 with more than a refreshed machine or two: it is laying out a wider bet across resin printing, FDM printing, and 3D scanning. That matters because the company is no longer presenting itself as merely a supplier of affordable creator hardware. It wants to...

Continue Reading

Top 5 Most Recently Viewed Articles

Exploring the Future of Generative AI Chipset Market Growth

Updated Category News Views 252

Generative AI Chipset Market Size Analysis The Generative AI Chipset Market is experiencing remarkable growth as the demand for high-performance AI hardware accelerates across various industries. Currently valued at approximately USD 37.29 billion in 2023, the market is anticipated to reach an impressive USD 454.50 billion by 2032, representing a staggering compound...

Continue Reading
CrateDB Welcomes Robert Ekstrom as New Chief Executive Officer

Updated Category News Views 297

CrateDB Welcomes Robert Ekstrom as New Chief Executive Officer CrateDB, the groundbreaking real-time database solution designed for analytics, search, and AI applications, has announced the exciting appointment of Robert Ekstrom as the new Chief Executive Officer. His leadership is viewed as a pivotal moment for the company, propelling its growth strategies and...

Continue Reading
Novartis AGM Highlights: Board Changes and Dividend Increase

Updated Category News Views 463

Key Outcomes from Novartis' Annual General Meeting Today, Novartis held its Annual General Meeting (AGM) where shareholders gathered to discuss and approve various resolutions proposed by the Board of Directors. It was an important day for the company, as a strong turnout highlighted investor engagement and confidence. Dividend Increase for 2024 This year marks a...

Continue Reading
Understanding Alliance Witan PLC's Net Asset Valuation Insights

Updated Category News Views 116

Understanding Alliance Witan PLC's Financial Standing Alliance Witan PLC stands out in the investment landscape, offering its shareholders a detailed look at their Net Asset Value (NAV). As of the latest reporting date, the financial metrics reveal significant information pertaining to the company's performance and shareholder value. Net Asset Value Calculation At the...

Continue Reading
Remembering Jimmy Carter: A Legacy of Service and Humanity

Updated Category News Views 375

Remembering Jimmy Carter: A Legacy of Service and Humanity Habitat for Humanity joins millions around the globe in reflecting on the remarkable life of former U.S. President Jimmy Carter. He is widely recognized not only as a political leader but also as a formidable advocate for affordable housing. A Champion for Affordable Housing Throughout his life, President Carter...

Continue Reading