Stratasys Ltd (SSYS) 89.90 $SSYS
Stratasys keeps 2014 outlook
at Investor's Business Daily - 27 mins ago
The 3D printer maker said Q1 EPS fell 7% to 40 cents, in line with views, as it continues to invest in sales, marketing and R&D. Sales rose 54% to $151.2 mil, above views for $143.3 mil. Revenue rose 33% ex MakerBot, acquired in June. Stratasys...
After Yesterday's Decline of 4.69%, Stratasys Offers Investors Better Value
Comtex SmarTrend(R) - Fri May 09, 3:46PM CDT
Stratasys (NASDAQ:SSYS) traded in a range yesterday that spanned from a low of $85.30 to a high of $89.92. Yesterday, the shares fell 4.7%, which took the trading range below the 3-day low of $92.56 on volume of 3.6 million shares. Often times after large one-day declines, short-term traders may play for some degree of mean reversion.
Stratasys Q1 Revenue Beats But Maintains 2014 Outlook
at Investor's Business Daily - Fri May 09, 11:57AM CDT
Stratasys (SSYS) on Friday reported first-quarter results that showed better-than-expected revenue growth, but its stock fell as earnings just met targets. Before the market open, the maker of 3D printers posted Q1 revenue of $151.2 million, up 54%...
Why Stratasys (SSYS) Stock Is Down Today
at The Street - Fri May 09, 11:07AM CDT
Stratasys (SSYS) is down Friday after reaffirming its full-year 2014 guidance, and despite beating analysts' expectations for revenue in the first quarter.
Jim Cramer's Mad Dash: Stratasys Is Nice, but Pricey
at The Street - Fri May 09, 9:40AM CDT
Cramer says shares of 3-D printing company Stratasys had gotten inflated.
Stratasys Inc. Surprises Investors With Higher Revenue in Q1
Tamara Walsh, The Motley Fool - Motley Fool - Fri May 09, 8:37AM CDT
Stratasys reported fiscal 2014 first-quarter earnings before the market opened today that showed better-than-expected revenue growth. For the period ended March 31, Stratasys reported a nongenerally accepted accounting principles profit of $20.6...
Stock Market Today: Stratasys’ Spending Spree and Hilton’s Profit Jump
Demitrios Kalogeropoulos, The Motley Fool - Motley Fool - Fri May 09, 8:00AM CDT
After just barely missing a record close yesterday, the Dow Jones Industrial Average has one more shot this week at breaking into positive territory for the year. The Dow was down a modest 27 points in pre-market trading, suggesting a flat start...
Stratasys Reports First Quarter Financial Results
Business Wire - Fri May 09, 5:30AM CDT
--Non-GAAP gross margin expands to 61% for the first quarter driven by sales of higher-margin products and services
Stratasys Q1 Earnings Due Amid Cautious Growth Period
at Investor's Business Daily - Thu May 08, 1:40PM CDT
3-D printer maker Stratasys is expected to show a deceleration in revenue growth when it reports first-quarter results before the market open Friday. The consensus estimate among analysts is for revenue of $143.3 million. That would be a 46% increase...
Stratasys, Ltd. Earnings: Will Growth Lift the Struggling Stock?
Dan Caplinger, The Motley Fool - Motley Fool - Thu May 08, 10:00AM CDT
On Friday, Stratasys will release its quarterly report, and the 3-D printing space has seen huge pressure as investors flee from high-flying growth stocks in favor of more defensive names. Yet, even as Stratasys falls in concert with 3D Systems ...
Understanding the Threat of Commoditization Facing 3-D Printing Stocks
Steve Heller, The Motley Fool - Motley Fool - Thu May 08, 8:31AM CDT
After attending the Inside 3D Printing Conference in New York City, it quickly became apparent that the consumer 3-D printing space has become overcrowded. Companies such as 3D Systems and Stratasys are beginning to have a difficult time...
How to Trade Earnings Including CBS and Monster Beverage
at The Street - Thu May 08, 7:33AM CDT
Bloomin' Brands, Chiquita, Ralph Lauren and Stratasys plan to report earnings Friday.
Checking in on the Industrial 3-D Printing Market
Steve Heller, The Motley Fool - Motley Fool - Wed May 07, 6:04PM CDT
Although the consumer 3-D printing segment attracts the most media attention, the industrial and professional 3-D printing segments are where 3D Systems and Stratasys generate the majority of their revenues. From an investment perspective, the...
Will Stratasys Ltd. (SSYS) Beat Earnings Estimates? - Analyst Blog
Zacks Equity Research - Zacks Investment Research - Wed May 07, 5:30PM CDT
Stratasys Ltd. (SSYS) is set to report first-quarter 2014 results on May 9.
3D Printing Stocks: What To Make Of Their Rise And Fall
at The Street - Wed May 07, 4:10PM CDT
Chris Lau, Kapitall: 3D printing stocks have been on a rollercoaster since last year. Chris Lau thinks the downside ride [...]
A Safer Way to Invest in 3-D Printing Stocks
Steve Heller, The Motley Fool - Motley Fool - Wed May 07, 10:03AM CDT
Despite the massive sell-offs that 3D Systems and Stratasys have experienced in 2014, the biggest names in 3-D printing are still very expensive on paper. For investors with a small appetite for buying expensive stocks, buying 3D Systems or...
Critical Alerts For SolarCity, Intel, Google, Microsoft, and Stratasys Released By InvestorsObserver
PR Newswire - Wed May 07, 8:31AM CDT
InvestorsObserver issues critical PriceWatch Alerts for SCTY, INTC, GOOGL, MSFT, and SSYS.
Mediabistro's Inside 3D Printing Conference Announces First Major 3D Printing Trade Show in South Korea, June 12-13 at Kintex
Business Wire - Wed May 07, 6:15AM CDT
Mediabistro Inc. (Nasdaq:MBIS) announced that its Inside 3D Printing trade show June12-13 at Kintex will be South Korea's first major 3D printing event.
MakerBot Offers a Step Back in Time with Jurassic T-Rex Skeleton and T-Rex Skull Models Available for Download and 3D Printing
Business Wire - Tue May 06, 12:46PM CDT
Adventurous 3D print fans have some new 3D models to get excited about this week. The MakerBot(R) Digital Store is thrilled to announce two new models that take 3D printing to a whole new level and time. MakerBot is introducing the T-Rex Skeleton, an anatomically correct, realistic and scaled model of a full Tyrannosaurus rex skeleton! This giant lived in the forested river valleys of North America 65 million years ago and has always been a favorite of 3D modelers, but very challenging to sculpt and 3D print. Also being introduced is a large-scale T-Rex Skull as part of the MakerBot Academy(SM) curriculum offered to educators. The T-Rex Skeleton is available for $14.99 on the MakerBot Digital Store - makerbot.com/digitalstore; the T-Rex Skull is available for free on Thingiverse.com/curriculum.
2 Key Takeaways From the Inside 3-D Printing Conference
Steve Heller, The Motley Fool - Motley Fool - Tue May 06, 12:45PM CDT
Last month, the Fool's 3-D printing specialist Steve Heller and industrials bureau chief Blake Bos attended the Inside 3-D Printing Conference in New York City to get a better sense of the latest developments in the 3-D printing industry. Steve and...
Stratasys keeps 2014 outlook
at Investor's Business Daily - 27 mins ago
The 3D printer maker said Q1 EPS fell 7% to 40 cents, in line with views, as it continues to invest in sales, marketing and R&D. Sales rose 54% to $151.2 mil, above views for $143.3 mil. Revenue rose 33% ex MakerBot, acquired in June. Stratasys...
After Yesterday's Decline of 4.69%, Stratasys Offers Investors Better Value
Comtex SmarTrend(R) - Fri May 09, 3:46PM CDT
Stratasys (NASDAQ:SSYS) traded in a range yesterday that spanned from a low of $85.30 to a high of $89.92. Yesterday, the shares fell 4.7%, which took the trading range below the 3-day low of $92.56 on volume of 3.6 million shares. Often times after large one-day declines, short-term traders may play for some degree of mean reversion.
Stratasys Q1 Revenue Beats But Maintains 2014 Outlook
at Investor's Business Daily - Fri May 09, 11:57AM CDT
Stratasys (SSYS) on Friday reported first-quarter results that showed better-than-expected revenue growth, but its stock fell as earnings just met targets. Before the market open, the maker of 3D printers posted Q1 revenue of $151.2 million, up 54%...
Why Stratasys (SSYS) Stock Is Down Today
at The Street - Fri May 09, 11:07AM CDT
Stratasys (SSYS) is down Friday after reaffirming its full-year 2014 guidance, and despite beating analysts' expectations for revenue in the first quarter.
Jim Cramer's Mad Dash: Stratasys Is Nice, but Pricey
at The Street - Fri May 09, 9:40AM CDT
Cramer says shares of 3-D printing company Stratasys had gotten inflated.
Stratasys Inc. Surprises Investors With Higher Revenue in Q1
Tamara Walsh, The Motley Fool - Motley Fool - Fri May 09, 8:37AM CDT
Stratasys reported fiscal 2014 first-quarter earnings before the market opened today that showed better-than-expected revenue growth. For the period ended March 31, Stratasys reported a nongenerally accepted accounting principles profit of $20.6...
Stock Market Today: Stratasys’ Spending Spree and Hilton’s Profit Jump
Demitrios Kalogeropoulos, The Motley Fool - Motley Fool - Fri May 09, 8:00AM CDT
After just barely missing a record close yesterday, the Dow Jones Industrial Average has one more shot this week at breaking into positive territory for the year. The Dow was down a modest 27 points in pre-market trading, suggesting a flat start...
Stratasys Reports First Quarter Financial Results
Business Wire - Fri May 09, 5:30AM CDT
--Non-GAAP gross margin expands to 61% for the first quarter driven by sales of higher-margin products and services
Stratasys Q1 Earnings Due Amid Cautious Growth Period
at Investor's Business Daily - Thu May 08, 1:40PM CDT
3-D printer maker Stratasys is expected to show a deceleration in revenue growth when it reports first-quarter results before the market open Friday. The consensus estimate among analysts is for revenue of $143.3 million. That would be a 46% increase...
Stratasys, Ltd. Earnings: Will Growth Lift the Struggling Stock?
Dan Caplinger, The Motley Fool - Motley Fool - Thu May 08, 10:00AM CDT
On Friday, Stratasys will release its quarterly report, and the 3-D printing space has seen huge pressure as investors flee from high-flying growth stocks in favor of more defensive names. Yet, even as Stratasys falls in concert with 3D Systems ...
Understanding the Threat of Commoditization Facing 3-D Printing Stocks
Steve Heller, The Motley Fool - Motley Fool - Thu May 08, 8:31AM CDT
After attending the Inside 3D Printing Conference in New York City, it quickly became apparent that the consumer 3-D printing space has become overcrowded. Companies such as 3D Systems and Stratasys are beginning to have a difficult time...
How to Trade Earnings Including CBS and Monster Beverage
at The Street - Thu May 08, 7:33AM CDT
Bloomin' Brands, Chiquita, Ralph Lauren and Stratasys plan to report earnings Friday.
Checking in on the Industrial 3-D Printing Market
Steve Heller, The Motley Fool - Motley Fool - Wed May 07, 6:04PM CDT
Although the consumer 3-D printing segment attracts the most media attention, the industrial and professional 3-D printing segments are where 3D Systems and Stratasys generate the majority of their revenues. From an investment perspective, the...
Will Stratasys Ltd. (SSYS) Beat Earnings Estimates? - Analyst Blog
Zacks Equity Research - Zacks Investment Research - Wed May 07, 5:30PM CDT
Stratasys Ltd. (SSYS) is set to report first-quarter 2014 results on May 9.
3D Printing Stocks: What To Make Of Their Rise And Fall
at The Street - Wed May 07, 4:10PM CDT
Chris Lau, Kapitall: 3D printing stocks have been on a rollercoaster since last year. Chris Lau thinks the downside ride [...]
A Safer Way to Invest in 3-D Printing Stocks
Steve Heller, The Motley Fool - Motley Fool - Wed May 07, 10:03AM CDT
Despite the massive sell-offs that 3D Systems and Stratasys have experienced in 2014, the biggest names in 3-D printing are still very expensive on paper. For investors with a small appetite for buying expensive stocks, buying 3D Systems or...
Critical Alerts For SolarCity, Intel, Google, Microsoft, and Stratasys Released By InvestorsObserver
PR Newswire - Wed May 07, 8:31AM CDT
InvestorsObserver issues critical PriceWatch Alerts for SCTY, INTC, GOOGL, MSFT, and SSYS.
Mediabistro's Inside 3D Printing Conference Announces First Major 3D Printing Trade Show in South Korea, June 12-13 at Kintex
Business Wire - Wed May 07, 6:15AM CDT
Mediabistro Inc. (Nasdaq:MBIS) announced that its Inside 3D Printing trade show June12-13 at Kintex will be South Korea's first major 3D printing event.
MakerBot Offers a Step Back in Time with Jurassic T-Rex Skeleton and T-Rex Skull Models Available for Download and 3D Printing
Business Wire - Tue May 06, 12:46PM CDT
Adventurous 3D print fans have some new 3D models to get excited about this week. The MakerBot(R) Digital Store is thrilled to announce two new models that take 3D printing to a whole new level and time. MakerBot is introducing the T-Rex Skeleton, an anatomically correct, realistic and scaled model of a full Tyrannosaurus rex skeleton! This giant lived in the forested river valleys of North America 65 million years ago and has always been a favorite of 3D modelers, but very challenging to sculpt and 3D print. Also being introduced is a large-scale T-Rex Skull as part of the MakerBot Academy(SM) curriculum offered to educators. The T-Rex Skeleton is available for $14.99 on the MakerBot Digital Store - makerbot.com/digitalstore; the T-Rex Skull is available for free on Thingiverse.com/curriculum.
2 Key Takeaways From the Inside 3-D Printing Conference
Steve Heller, The Motley Fool - Motley Fool - Tue May 06, 12:45PM CDT
Last month, the Fool's 3-D printing specialist Steve Heller and industrials bureau chief Blake Bos attended the Inside 3-D Printing Conference in New York City to get a better sense of the latest developments in the 3-D printing industry. Steve and...
