$MCIG NOBODY can compete with $10 for a device like this!

New Post Public Reply Private Reply Replies (0) Message Board
MattySimone equijohn #4697
[b]$MCIG NOBODY can compete with $10 for a device like this![/b]

mCig 2.0 – The Bar Has Been Raised

The new mCig carries a 360mAh Battery as opposed to 280mAh; we achieved this by engineering a wider albeit shorter battery. The entire mCig is actually 1/2 inch shorter than the original mCig making it more convenient to carry around.

The LED light at the tip has been replaced by a proprietarily designed LED button/voltage control. By removing the LED at the tip, the new mCig provides more privacy allowing users to enjoy the mCig without attracting as much attention. The LED button lights up when turning the mCig on, when choosing a desired heating voltage, and when pressed down to heat up the plant material.

Variable Heat Settings – 3.3, 3.5, 3.7 volts. By controlling the heat settings the mCig is better suited for personalized wax and dry leaf heating. Users can easily switch between the two and achieve the desired setting based on personal preference.

Silicon Heat Shield – Some previous users of the mCig complained about overheating. We solved this issue by including a silicon heat protector between the mCig battery and the heating chamber.

Wider Heating Chamber – The single most important improvement comes in the form of the heating chamber. The previous mCig version had a thin heating chamber causing clogs which resulted in users having trouble cleaning out plant material after use. In some cases this led to users breaking the heating coil by being overly aggressive. We have solved this issue by widening the heating chamber. This allows for much more room when packing plant material and when cleaning after use. More importantly, the wider heating chamber allows for the insertion of a separately sold glass chamber. By utilizing the glass chamber mCig users will be getting a 100% true vaporizing experience which will require a longer heat up time. Other benefits include quick and easy cleaning as no plant material touches the heating coil. The wider chamber adapts easily for rapid-reload chambers for users on the go, who need a drop in/drop out reload.

Horizontal Heating Coil – We completely re-engineered the heating coil with it being inlaid horizontally. When packing plant material directly there will be less risk of damage given that the internal architecture will not create pressure blocks. Internal testing has shown that heated plant material falls out easily after use, requiring less manual cleaning.

Thicker Silicon Mouthpiece – The new mouthpiece is thicker and wider, allowing for more airflow while protecting from overheating.

The new mCig is designed for two types of users:

The professional or advanced user who will most probably elect for a true vaporizing experience, requiring the glass insert. This experience will require a higher voltage and longer heat up time (20-40 seconds) but will provide a classic vaporizing experience achieved at an unrivaled price point.

The recreational user who enjoys the unique mCig heating experience. This can be experienced by inserting the dry leaf, wax, or herbs directly into the heating chamber just like the previous mCig version and using any heat setting requiring as little as 3 seconds and as long as 10 seconds to heat up.

All of these features are packed into one device that will retail for only $10. Domestic Shipping & Handling starts at $2.99. Canadian Shipping is $6.99, and International Shipping for up to 8 devices is $10. Order an mCig today by visiting: www.mCig.org/buy-online/

"As our loyal customers can see, we have put a lot of time, effort, and thought into developing what we believe will be the industry standard herbal electronic cigarette. We sincerely apologize to those customers who have been patiently waiting for their replacement mCig or customers with pre-orders which we greatly appreciate. We promise to satisfy you expeditiously and with priority. We want to ensure you are satisfied with our products and our company. Thank you for your continued support and loyalty," said Paul Rosenberg, CEO of mCig, Inc.
I own shares of the stock I post about and I may or may not buy or sell those shares without notification
Scroll down for more posts ▼

Top 10 Most Recent News Articles

Top 5 Most Recently Viewed Articles

Investors Urged to Act as Lawsuit Against Everus Builds

Updated Category News Views 97

Investigation of Claims Against Everus Construction Group Faruqi & Faruqi, LLP, a well-respected national securities law firm, has initiated an investigation into potential claims associated with Everus Construction Group, Inc. (NYSE: ECG). The firm specializes in shareholder rights and is aiming to provide support to affected investors after concerning revelations about...

Continue Reading
Heilongjiang Forum 2025: Elevating Macao's Global Tourism Standing

Updated Category News Views 107

Global Tourism Economy Forum 2025: A Landmark Event The Global Tourism Economy Forum (GTEF) made its notable debut outside of Macao by hosting the 2025 edition in Heilongjiang province, China. This forum gathered influential figures from the tourism sector and various related industries, fostering discussions aimed at exploring new avenues for cooperation and growth....

Continue Reading
Nextracker and T1 Energy Collaboration Drives Solar Growth

Updated Category News Views 198

Nextracker and T1 Energy Join Forces to Strengthen Solar Production Nextracker Inc. (NASDAQ: NXT) has recently established a partnership with T1 Energy Inc. (NYSE: TE) aimed at revolutionizing solar manufacturing. This collaboration will see the integration of Nextracker's cutting-edge steel module frame technology into T1 Energy's upcoming solar manufacturing plant,...

Continue Reading
Nathan Ballentine Steps In as Regional VP at New American Funding

Updated Category News Views 175

New Leadership at New American Funding New American Funding (NAF), a prominent independent mortgage lender, has announced a significant appointment. Nathan Ballentine is joining the team as the Regional Vice President, where he will play a pivotal role in propelling growth and development within the state. His expertise will be crucial as the company seeks to deepen its...

Continue Reading
CSL Behring Secures Approval for ANDEMBRY® in Japan

Updated Category News Views 341

CSL Behring's Recent Approval for ANDEMBRY® CSL Behring has announced a significant medical milestone with the approval of ANDEMBRY® (garadacimab) subcutaneous (S.C.) injection 200mg pens in Japan. This groundbreaking therapy is a first-in-class monoclonal antibody specifically designed to inhibit activated Factor XII (FXIIa), a crucial initiator in the hereditary...

Continue Reading