(Total Views: 625)
Posted On: 11/11/2020 7:59:10 PM
Post# of 51861
Re: ready2gorstay #44047
yes this is true but here is something to consider on this matter.
No melted steel, no collapsed towers.
For example, according to www.911research.wtc7.net, steel melts at a temperature of 2,777 degrees Fahrenheit, but jet fuel burns at only 1,517 degrees F. No melted steel, no collapsed towers . "The planes did not bring those towers down; bombs did," says www.abovetopsecret.com. Wrong. In an article in the Journal of the Minerals, Metals, and Materials Society and in subsequent interviews, Thomas Eagar, an engineering professor at the Massachusetts Institute of Technology, explains why: steel loses 50 percent of its strength at 1,200 degrees F; 90,000 liters of jet fuel ignited other combustible materials such as rugs, curtains, furniture and paper, which continued burning after the jet fuel was exhausted, raising temperatures above 1,400 degrees F and spreading the inferno throughout each building. Temperature differentials of hundreds of degrees across single steel horizontal trusses caused them to sag--straining and then breaking the angle clips that held the beams to the vertical columns. Once one truss failed, others followed. When one floor collapsed onto the next floor below, that floor subsequently gave way, creating a pancaking effect that triggered each 500,000-ton structure to crumble. Conspiricists argue that the buildings should have fallen over on their sides, but with 95 percent of each building consisting of air, they could only have collapsed straight down
source
https://www.scientificamerican.com/article/fahrenheit-2777/
tell me what you think
No melted steel, no collapsed towers.
For example, according to www.911research.wtc7.net, steel melts at a temperature of 2,777 degrees Fahrenheit, but jet fuel burns at only 1,517 degrees F. No melted steel, no collapsed towers . "The planes did not bring those towers down; bombs did," says www.abovetopsecret.com. Wrong. In an article in the Journal of the Minerals, Metals, and Materials Society and in subsequent interviews, Thomas Eagar, an engineering professor at the Massachusetts Institute of Technology, explains why: steel loses 50 percent of its strength at 1,200 degrees F; 90,000 liters of jet fuel ignited other combustible materials such as rugs, curtains, furniture and paper, which continued burning after the jet fuel was exhausted, raising temperatures above 1,400 degrees F and spreading the inferno throughout each building. Temperature differentials of hundreds of degrees across single steel horizontal trusses caused them to sag--straining and then breaking the angle clips that held the beams to the vertical columns. Once one truss failed, others followed. When one floor collapsed onto the next floor below, that floor subsequently gave way, creating a pancaking effect that triggered each 500,000-ton structure to crumble. Conspiricists argue that the buildings should have fallen over on their sides, but with 95 percent of each building consisting of air, they could only have collapsed straight down
source
https://www.scientificamerican.com/article/fahrenheit-2777/
tell me what you think
(0)
(0)
