Posted On: 02/26/2016 4:53:37 PM
Post# of 22940
$TPAC This is what I am going off of, Cajun.
Follow
TPAC Bearings
@TPACbearings
NAVAIR inspected & approved BTL as our supplier. If we change suppliers we must notify NAVAIR. We're in full compliance with NAVAIR regs
I am only going on what little info has been given. And in a reply this afternoon to Smartmoney, I asked to be corrected if my info is in error. While I cannot be 100% certain until more info surfaces, the links/data I have posted regarding BTL seems like a very likely scenario, seeing as they are just down the road from $TPAC and also due to the fact that Boeing(and a few others) are clients of BTL. I am merely drawing what I believe is the most probable conclusion. For additional clarity that I am not able to provide, I would keep an eye on Twitter. This was a question posted just after the most recent Tweet:
Austin Homrighaus @austinhomer 55m55 minutes ago
@TPACbearings Bill, apolgies, but can you clarify what BTL supplies TPAC? Your machining equipment you use to produce parts?
Additionally, emailing Bill for specifics may be another option. If you find something that I haven't, or that I am in error, by all means let me know so we have accurate info as a board.
Follow
TPAC Bearings
@TPACbearings
NAVAIR inspected & approved BTL as our supplier. If we change suppliers we must notify NAVAIR. We're in full compliance with NAVAIR regs
I am only going on what little info has been given. And in a reply this afternoon to Smartmoney, I asked to be corrected if my info is in error. While I cannot be 100% certain until more info surfaces, the links/data I have posted regarding BTL seems like a very likely scenario, seeing as they are just down the road from $TPAC and also due to the fact that Boeing(and a few others) are clients of BTL. I am merely drawing what I believe is the most probable conclusion. For additional clarity that I am not able to provide, I would keep an eye on Twitter. This was a question posted just after the most recent Tweet:
Austin Homrighaus @austinhomer 55m55 minutes ago
@TPACbearings Bill, apolgies, but can you clarify what BTL supplies TPAC? Your machining equipment you use to produce parts?
Additionally, emailing Bill for specifics may be another option. If you find something that I haven't, or that I am in error, by all means let me know so we have accurate info as a board.
(1)
(0)
Do your own DD. Assume everyone here is either an amateur trader/investor or a paid interest such as a compensated pumper/basher. My posts are strictly for entertainment purposes. I am not on Wall St., do not work for a group, and only get paid when my personal investments materialize. I am only responsible for my own gains and losses; no one is to blame for my mistakes or for any advice taken from postings; likewise, I am not to blame for any advice you take of mine, regardless of gains or losses from doing so. Good luck to all; may you live long and prosper greatly.
Scroll down for more posts ▼
