Development of Micro JP-8 Fuel Injection System for Small Unmanned Aerial Army SBIR 2014.1 - Topic A14-019 Opens: December 20, 2013 - Closes: January 22, 2014 A14-019 TITLE: Development of Micro JP-8 Fuel Injection System for Small Unmanned Aerial and Ground Engines
TECHNOLOGY AREAS: Air Platform
ACQUISITION PROGRAM: PEO Aviation
OBJECTIVE: To develop and demonstrate a €˜novel €™ direct fuel injection system for small unmanned compression-ignition heavy-fuel (primarily Jet Propellant- engines (3-70 horsepower)
DESCRIPTION: The Army is in need of efficient heavy-fuel small engines (3 to 70 horsepower) for unmanned aerial and ground systems. The success of these engines requires efficient and reliable micro direct fuel injection systems. Currently, there is no reliable direct fuel injection system for small engines due to various reasons. One of them is manufacturing capability of micro nozzles.
Use of direct fuel injection into a combustion chamber can achieve much higher engine efficiency than that of carburetor or port fuel injection. Direct fuel injection also provides flexibility to control combustion processes to improve engine performance and efficiency by using injection strategies such as multiple injections and rate shaping which shall be compared with the current Shadow Unmanned Aerial Vehicle (UAV) engine (i.e. a 38-horsepower rotary engine with aviation gasoline). Since much higher fuel injection pressure can be applied for direct fuel injection, engine power can be increased significantly higher than the old fuel injection systems. Direct fuel injection system has been predominantly developed for low- to heavy-duty engines. Therefore, while the demand for the small engines is increasing, there has been no reliable direct fuel injection system for small engines. Furthermore, in contrast to low- to heavy-duty engine classes for which significant amounts of research have been done by large companies, no noticeable research on small engines have been done until now. One of the main challenges in developing a direct fuel injection system for small engines is preparing combustible fuel-air mixture within the confined space of the small engine combustion chamber. The current off-the-shelf fuel injectors provide excessive liquid fuel penetration and high cycle-to-cycle variations in small fuel quantities. Smaller injector nozzle (< 75 micrometers) can achieve shorter penetration length; however, the current manufacturing capabilities such as electrical discharge machining (EDM) are limited for nozzle sizes smaller than 75 micrometers. The lower side of the nozzle sizes shall be as low as 40 micrometers, while the upper side being up to 150 micrometers. Therefore, the drilling method should be able to machine from 40 to 150 micrometers with the tolerances of less than +/-2.5 micrometers. The material shall have good thermal shock resistance, high hardenability, excellent wear resistance, and hot toughness such as AISI (American Iron and Steel Institute) Type H13. The material shall be heat treated with a method such as Rockwell Hardness Scale €œC € with the hardness scale between 51 and 53 (air or oil quenched above 1000?C), which is the most common heat treatment for nozzle manufacturing. The wear rate of the nozzle internal surface shall be minimized and be equivalent to the current production common-rail diesel injector nozzle wear rates.
The nozzle shall be a stand-alone component with the following requirements: €¢ Houses the needle and provides the needle seat €¢ Accommodates the hydraulic circuitry for needle motion and fuel delivery below the seat €¢ Interfaces with the control valve €¢ Provides a small sack volume below the seat for orifice intersection €¢ Operates up to 15,000 psi (or 1035 bar) €¢ Accommodates 1 to 8 orifices at the nozzle tip €¢ Ability to custom configure the number of orifices, size, spray angles and directions from an undrilled €œBlank € needle/nozzle set €¢ Injection quantity: 0.5 to 45 mm3/cycle €¢ Cycle to cycle variability: less than 2%
PHASE I: Develop €˜novel €™ micro direct fuel injection system concepts which can provide appropriate fuel-air mixture for efficient combustion in small internal combustion engines. The technology shall be evaluated through fluid flow analysis for injection characteristics conducive to small engine environments. Assess the manufacturability of the proposed technology identifying the methods and equipment capable of production. Phase I shall be assessed based on the micro injector design concepts, manufacturing processes and machining capability, and nozzle internal flow and spray analytical analysis in small engine environment (i.e. Shadow UAV engine). The parameters for the analysis shall include nozzle inlet diameter, nozzle outlet diameter, nozzle shaping, sac volume, nozzle orifice orientation, and discharge coefficient among others.
PHASE II: Develop and demonstrate the technology and manufacturing methods. Assess injector fuel charge preparation through experimental spray testing and analysis as well as 3-dimensional computational fluid dynamics (3-D CFD) analysis. Characteristics should include minimum injection quantity, cycle-to-cycle variability, rate of injection, and spray patterns among others at various fuel injection pressures, injection quantities, and multiple injections. Manufacturing assessment shall evaluate the method, repeatability, and tolerance holding capability by measuring nozzle geometries with scanning electron microscope (SEM) or scanning acoustic microscopy. The assessment shall be made according to the requirements in the description section. Deliverables should include the reports, test and analysis results, manufactured prototype injector(s).
PHASE III: Develop and demonstrate a fuel injection system that can be integrated with small engines (3-70 horsepower) for unmanned aerial and ground systems. This system should be available for future Army and commercial unmanned aerial and ground systems. This heavy-fuel (i.e. Jet Propellant-8 (JP- ) injection system should lead to the development of higher engine performance, higher fuel economy, lower noise, and reliable engines for unmanned systems. The developed fuel system could be implemented as a JP-8 fuel injection system for the Shadow Unmanned Aerial Vehicle (UAV) engine (currently it uses a 38-horsepower rotary engine with aviation gasoline). The demand for small UAVs is projected to grow not only in the military but also in the commercial applications. The developed fuel injection systems could facilitate the development of small UAV engines fueled with heavy fuels such as JP-8, Jet A, diesel, and alternative heavy fuels. Increased demand in the commercial sector would enhance the research and development in small engines. This would lead to more advanced propulsion systems for future DoD UAV systems.
REFERENCES: 1. Tanya J., Gibson, €œARL opens unique combustion research lab, studies in JP-8 fuel could lead to "super engine" development. € U.S. Army Research Laboratory (http://www.arl.army.mil/www/default.cfm?page=1217), October 9, 2012.
2. C-B. M. Kweon, €œA Review of Heavy-Fueled Rotary Engine Combustion Technologies, € ARL-TR-5546, 2011.
3. Mashayek, F., €œSTTR Phase I: Electrostatic Atomizing Fuel Injector for Small Scale Engines, € Report No. EES-DD0010, U.S. Army Research Office: Research Triangle Park, NC, 2008.
4. Hoogterp-Decker, L. and Schihl, P., €œThe Use of Synthetic JP-8 Fuels in Military Engines, € 27th Army Science Conference, Dec. 2, 2010.
5. Schihl, P. and Hoogterp-Decker, L., €œOn the Ignition and Combustion Variances of Jet Propellant-8 and Diesel Fuel in Military Diesel Engines, € TACOM/TARDEC-19172RC, 2008.
6. Pisano, A., Fernandez-Pello, C., McCoy, C., Reville, J., and Limtiaco, J., €œFinal Report: Fuel Flexible Rotary Engine for Portable Power Applications, € Report No. 53049-EG.2, U.S. Army Research Office: Research Triangle Park, NC, 2010.
7. Staley C.S., Morris, C.J., and Currano, L.J., €œDevelopment of Nanoenergetic Micro-fluidic Jet Injectors, € ARL-TR-5872, 2012.
8. Brandt, A.C. and Yost, D.M., €œEvaluation of Military Fuels Using a Ford 6.7L Powerstroke Diesel Engine, € Interim Report TFLRF No. 415, Southwest Research Institute (SwRI), 2011.
9. Chang, C.I., €œFundamentals and Innovations of Army Energy Conversion Systems, € Symposium on Energy Conversion Fundamentals, Istanbul, Turkey, June 21-25, 2004.
KEYWORDS: compression ignition, heavy fuel, fuel injection system, direct injection, small engines, unmanned aerial system, unmanned ground system, Jet Propellant-8, efficiency, performance, injector, spray
TPOC: Dr. Chol-Bum Kweon Phone: 410-278-9319 Email: chol-bum.m.kweon@us.army.mil
Copyright © Zyn Systems 2013, all rights reserved |
Posted On: 12/22/2013 1:48:55 PM
Post# of 183
(0)
(0)
Top 10 Most Recent Blog Posts
Windtree's Latest Advances: Istaroxime Clinical Trials
Category: Stocks Total Views: 87
By : Lucas Young Updated: 07-28-2024
Windtree Therapeutics Updates Istaroxime Clinical Development and Trial Data
Providing a thorough update on the clinical and business development of istaroxime, Windtree Therapeutics, Inc. (NasdaqCM: WINT), a biotechnology company committed to developing creative therapies for critical diseases, has This first-in-class treatment seeks to raise blood pressure, preserve or increase renal function, and strengthen systolic contraction and diastolic relaxation of the heart. In three Phase 2 trials... Continue Reading
SEC Charges Citron Capital in Multi-Year Fraud Scheme
Category: Investing Total Views: 58
By : Evelyn Baker Updated: 07-28-2024
SEC Charges Andrew Left and Citron Capital in $20 Million Fraud Scheme
Andrew Left and his company, Citron Capital LLC, have been charged with a $20 million fraud by the Securities and Exchange Commission (SEC). They are activists short sellers. The SEC complaint claims Left recommended stock positions using his Citron Research website and social media platform. He said these positions complemented Citron Capital's and his own investments. Left's recommendations, according to the SEC,... Continue Reading
BurgerFi Resolves Lawsuit, Plans Strategic Expansion
Category: Stocks Total Views: 105
By : Owen Jenkins Updated: 07-28-2024
BurgerFi International Settles Litigation with Lion Point Capital
The owner of Anthony's Coal Fired Pizza & Wings and BurgerFi brand, BurgerFi International, Inc. (NASDAQ: BFI, BFIIW), revealed a sizable settlement with Lion Point Capital, LP. This agreement settles all outstanding claims brought by Lion Point against BurgerFi since the litigation started.
BurgerFi will pay Lion Point $1,350,000 in installments per terms of the settlement. BurgerFi will also issue Lion Point 300,00... Continue Reading
Market Volatility Ahead of Fed Meeting and Jobs Data
Category: Markets Total Views: 83
By : Logan Wright Updated: 07-28-2024
Upcoming Earnings Reports from Tech Giants
The earnings reports from some of the most well-known tech companies—including Microsoft, Apple, Amazon, and Meta Platforms—are much awaited by investors. These studies are vital since they might either calm the market or cause more volatility. A rally in tech stocks stalled in the second half of July, which caused a notable selloff following Tesla and Alphabet's underperformance. The results this week will be a litmus test for the ma... Continue Reading
Trump Supports Crypto with New Bitcoin Reserve Plan
Category: Crypto Total Views: 220
By : Dylan Bailey Updated: 07-27-2024
Trump Champions U.S. Bitcoin Reserve at Bitcoin Conference
At the Bitcoin Conference in Nashville, former US President Donald Trump declared his endorsement of a strategic national bitcoin reserve. He underlined the need to keep the government's seized bitcoin intact and never sell it. This action seeks to confirm his ranking as the preferred candidate for the crypto community. With his audacious crypto policies, Trump's speech drew in over 3,000 people. The announcement fits the increa... Continue Reading
Weak Demand and Global Issues Impact China's Industries
Category: Economy Total Views: 191
By : Olivia Taylor Updated: 07-27-2024
China's Industrial Profits Accelerate in June
China's industrial gains in June increased more quickly, a reflection of good economic trends despite underlying problems. Official figures revealed a 3.6% year-on-year rise in profits, against a 0.7% increase in May. Strong industry output, according to the National Bureau of Statistics (NBS), helped to explain this increase. Since the second quarter also had a major influence, the easing of factory-gate price declines also reflects. This... Continue Reading
Key Tech Earnings to Shape Market's Near-Term Trajectory
Category: Markets Total Views: 178
By : Thomas Cooper Updated: 07-27-2024
Anticipation Builds for Major Tech Earnings
Earnings reports from big tech companies are much awaited by investors, who might shape the direction of American stock markets. Next week Microsoft, Apple, Amazon, and Meta Platforms have to report their quarterly results. The tech industry has shown notable volatility; recent results from Alphabet and Tesla let down the market. This begs questions regarding whether other tech behemoths can satisfy great expectations. These firms' performance i... Continue Reading
Essential Guide to Bonds: Investing for Beginners
Category: Investing Total Views: 165
By : Kelly Martin Updated: 07-27-2024
Understanding the Basics of Bonds
Bonds are debt instruments companies use to generate capital. Bonds are bought by investors, so the issuing body lends funds. The issuer promises to pay interest at regular intervals in exchange, then return the principal amount on the maturity date. For bondholders, this procedure produces a consistent income source. Bonds can help to lower general volatility and diversify a portfolio. These are often considered safer investments than stocks. Still, knowledg... Continue Reading
Improving Inflation Data Boosts Global Market Sentiment
Category: Economy Total Views: 197
By : Ryan Hughes Updated: 07-27-2024
Global Stocks Rebound After Four-Day Decline
Friday's global stocks show a notable comeback, the first increase in four sessions. Following a dramatic selloff, this recovery found equities stable among bettering economic signals. Data showing a small rise in the personal consumption expenditures (PCE) price index were published by the Commerce Department. Last month this index—a Federal Reserve preferred inflation gauge—rose 0.1%. The statistics implied a possible relaxation o... Continue Reading
OpenAI Launches SearchGPT: A Game Changer in AI Search
Category: Business Total Views: 355
By : Henry Turner Updated: 07-26-2024
OpenAI Unveils SearchGPT: A New Era in Search Technology
Recently OpenAI revealed a prototype of its own search engine, SearchGPT. This instrument seeks to give users quick, accurate responses backed by pertinent, clear sources. Under alpha testing with a small group of users, SearchGPT promises to transform online information search. This tool is meant to be included into the viral chatbot ChatGPT so that a more natural and simple search experience is enabled. Like in a conversation, users w... Continue Reading